From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 10 Dec 2013 12:48:31 +0100 Subject: [Buildroot] OpenVPN doesn't start In-Reply-To: References: Message-ID: <52A6FF8F.3060606@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 09/12/13 19:53, Javier Alejandro Saenz Leguizamon wrote: > Hi. > > I'm always getting this error when start my Open VPN client: > > /etc/init.d/S60openvpn start > Starting openvpn: FAILED-> server. > > I check the log (/var/log/openvpn.log) and it seems the problem is LZO > compression. > > Thu Jan 1 00:41:12 1970 us=447937 OpenVPN 2.3.2 > armeb-buildroot-linux-gnueabi [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] > built on Dec 4 2013 > Thu Jan 1 00:41:12 1970 us=449843 WARNING: No server certificate > verification method has been enabled. See > http://openvpn.net/howto.html#mitm for more info. > Thu Jan 1 00:41:12 1970 us=471562 Cannot initialize LZO compression library > Thu Jan 1 00:41:12 1970 us=471968 Exiting due to fatal error > > so I check the menuconfig and is enabled, and now I dont know what to > do, can anyone help me pls. > > I'm using codesourcery 2013.05 toolchain and buildroot-2013.08.1, I'll > attach my .config. You don't even seem to have OpenVPN enabled, so how can you even start it? Regards, Arnout > > thank you very much for your help > > > > Javier Alejandro S?enz Leguizam?n > Ingeniero Electr?nico > Universidad Nacional de Colombia > > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F