From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Wed, 29 Jan 2014 08:53:39 +0100 Subject: [Buildroot] [PATCH] defconfig for Phytec Cosmic-AM335x Board In-Reply-To: <87lhxzzrj3.fsf@dell.be.48ers.dk> References: <1390908698-7256-1-git-send-email-praveen.v@phytec.in> <87lhxzzrj3.fsf@dell.be.48ers.dk> Message-ID: <52E8B383.5050406@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 28/01/14 23:10, Peter Korsgaard wrote: >>>>>> "Praveen" == Praveen kumar Vattipalli writes: [snip] > > + > > +Result of the build > > +------------------- > > + > > +After building, you should obtain this tree: > > + > > + output/images/ > > + +-- rootfs.tar > > + +-- barebox.bin > > + +-- uImage > > + > > +To boot the board you need MLO (primary bootloader) so download from below link > > +ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/images/MLO > > Hmm, can't we build MLO ourselves? The patch that makes that possible in barebox was just rejected in patchwork... [snip] > > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="arm-cortexa8-linux-gnueabi" > > +BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y > > +BR2_TOOLCHAIN_EXTERNAL_CXX=y > > +BR2_TARGET_GENERIC_HOSTNAME="Cosmic-AM335x" > > +BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV=y > > +BR2_TARGET_GENERIC_GETTY_PORT="ttyO0" > > +BR2_TARGET_GENERIC_GETTY_TERM="" > > +BR2_LINUX_KERNEL=y > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y > > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="ftp://ftp.phytec.de/pub/Products/India/Cosmic-AM335x/Linux/PD13.0.0/src/linux/linux-3.2.tar.bz2" > > No mainline support? 3.2 so still using board files... [snip] Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F