From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 04 Feb 2014 10:08:04 +0100 Subject: [Buildroot] buildroot(busybox) problem with ccache during rtai-4.0-test2 compiling. In-Reply-To: References: <20140130200821.2c0559d8@skate> <20140131090444.725c88d4@skate> Message-ID: <52F0ADF4.8080509@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 31/01/14 12:09, servo gmrt wrote: > I am trying to build integrated linux-kernal, rootfs, and rtai, > > To complie rtai, I enabled rtai and patch location in .config file. Other > than that I have not made any changes in any of the buildroot files. > > Is there any changes I should make in buoldroot before buliding RTAI ? The RTAI version we have in buildroot is RTAI 3.8.1. So if you are building RTAI 4.0, it means you are using a fork. So either you have to contact the maintainer of your fork, or you have to give us the patches that were applied in order to use RTAI 4.0. Regards, Arnout > > Thanks & Regards, > B.Thiyagarajan > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F