From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Thu, 27 Feb 2014 21:43:23 +0100 Subject: [Buildroot] Qt5 and gpu-viv-bin-mx6q problem In-Reply-To: <530FA318.20001@boundarydevices.com> References: <530F9D1C.7020100@mind.be> <530FA318.20001@boundarydevices.com> Message-ID: <530FA36B.1010003@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 02/27/14 21:42, Eric Nelson wrote: > Hi Arnout, > > On 02/27/2014 01:16 PM, Arnout Vandecappelle wrote: >> On 02/27/14 09:22, Massimiliano Marretta wrote: >>> Dear, >>> >>> >>> >>> - If I use the last buildroot linaro toolchain 4.8-2013.09, the system >>> not start because the kernel is to old ( 3.0.35 ). >>> - If I use the toolchain linaro-4.7-2013.01 the Qt5 qmlscene exit without >>> message and gpu-viv-bin-mx6q examples not start with the message program >>> not found. >> >> I think that gpu-viv-bin-mx6q are softfp libraries, so they won't work >> with Linaro (hardfp) toolchains. I'm surprised that qt5 builds at all in >> that case... >> > The latest patches (on -next) allow for either hardfp or softfp: > > http://git.buildroot.net/buildroot/commit/package/freescale-imx/gpu-viv-bin-mx6q?h=next&id=b0b72591d74c1a84b8c1b2e1990a2fe1dfe8c4ab Yes, but the OP mentioned that he uses 2013.11 in the text you snipped. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F