From mboxrd@z Thu Jan  1 00:00:00 1970
From: Arnout Vandecappelle <arnout@mind.be>
Date: Wed, 12 Mar 2014 08:55:41 +0100
Subject: [Buildroot] [PATCH 3/6] Makefile: fix coding style
In-Reply-To: <1394540278-28740-4-git-send-email-fabio.porcedda@gmail.com>
References: <1394540278-28740-1-git-send-email-fabio.porcedda@gmail.com>
 <1394540278-28740-4-git-send-email-fabio.porcedda@gmail.com>
Message-ID: <532012FD.9000608@mind.be>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

On 03/11/14 13:17, Fabio Porcedda wrote:
> As stated in the buildroot user manual add just a single space before
> and after a '=' sign.
> 
> Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>

Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

 Reviewing this patch leads to a few more opportunities, though. So these
are commented below.

> ---
>  Makefile | 188 +++++++++++++++++++++++++++++++--------------------------------
>  1 file changed, 94 insertions(+), 94 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 30d56d0..0420364 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -25,10 +25,10 @@
>  #--------------------------------------------------------------
>  
>  # Set and export the version string
> -export BR2_VERSION:=2014.05-git
> +export BR2_VERSION := 2014.05-git

 No reason for := here.

>  
>  # Check for minimal make version (note: this check will break at make 10.x)
> -MIN_MAKE_VERSION=3.81
> +MIN_MAKE_VERSION = 3.81
>  ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
>  $(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
>  endif
> @@ -59,33 +59,33 @@ export HOSTARCH := $(shell uname -m | \
>  #	make BR2_JLEVEL= -j$((`getconf _NPROCESSORS_ONLN`+1))
>  
>  # absolute path
> -TOPDIR:=$(shell pwd)
> -CONFIG_CONFIG_IN=Config.in
> -CONFIG=support/kconfig
> -DATE:=$(shell date +%Y%m%d)
> +TOPDIR := $(shell pwd)
> +CONFIG_CONFIG_IN = Config.in
> +CONFIG = support/kconfig

 Actually, this is used in just one place so perhaps it can be removed.

> +DATE := $(shell date +%Y%m%d)

 Same here.

>  
>  # Compute the full local version string so packages can use it as-is
>  # Need to export it, so it can be got from environment in children (eg. mconf)
> -export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
> +export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
>  
> -noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
> +noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
>  	defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
>  	randpackageconfig allyespackageconfig allnopackageconfig \
>  	source-check print-version olddefconfig
>  
>  # Strip quotes and then whitespaces
> -qstrip=$(strip $(subst ",,$(1)))
> +qstrip = $(strip $(subst ",,$(1)))
>  #"))
>  
>  # Variables for use in Make constructs
> -comma:=,
> -empty:=
> -space:=$(empty) $(empty)
> +comma := ,
> +empty :=
> +space := $(empty) $(empty)
>  
>  ifneq ("$(origin O)", "command line")
> -O:=output
> -CONFIG_DIR:=$(TOPDIR)
> -NEED_WRAPPER=
> +O := output
> +CONFIG_DIR := $(TOPDIR)
> +NEED_WRAPPER =

 No need to define NEED_WRAPPER to empty.

>  else
>  # other packages might also support Linux-style out of tree builds
>  # with the O=<dir> syntax (E.G. Busybox does). As make automatically
> @@ -97,18 +97,18 @@ MAKEOVERRIDES =
>  # of the origin function (command line -> environment).
>  # Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
>  # To really make O go away, we have to override it.
> -override O:=$(O)
> -CONFIG_DIR:=$(O)
> +override O := $(O)
> +CONFIG_DIR := $(O)
>  # we need to pass O= everywhere we call back into the toplevel makefile
>  EXTRAMAKEARGS = O=$(O)
> -NEED_WRAPPER=y
> +NEED_WRAPPER = y
>  endif
>  
>  # bash prints the name of the directory on 'cd <dir>' if CDPATH is
>  # set, so unset it here to not cause problems. Notice that the export
>  # line doesn't affect the environment of $(shell ..) calls, so
>  # explictly throw away any output from 'cd' here.
> -export CDPATH:=
> +export CDPATH :=
>  BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
>  $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
>  
> @@ -150,27 +150,27 @@ endif
>  # Avoids doing the $(or...) everytime
>  _BR2_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
>  
> -BUILD_DIR:=$(BASE_DIR)/build
> -STAMP_DIR:=$(BASE_DIR)/stamps
> -BINARIES_DIR:=$(BASE_DIR)/images
> -TARGET_DIR:=$(BASE_DIR)/target
> +BUILD_DIR := $(BASE_DIR)/build
> +STAMP_DIR := $(BASE_DIR)/stamps
> +BINARIES_DIR := $(BASE_DIR)/images
> +TARGET_DIR := $(BASE_DIR)/target

 All these don't need :=

>  # initial definition so that 'make clean' works for most users, even without
>  # .config. HOST_DIR will be overwritten later when .config is included.
> -HOST_DIR:=$(BASE_DIR)/host
> -
> -LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
> -REDIST_SOURCES_DIR_TARGET=$(LEGAL_INFO_DIR)/sources
> -REDIST_SOURCES_DIR_HOST=$(LEGAL_INFO_DIR)/host-sources
> -LICENSE_FILES_DIR_TARGET=$(LEGAL_INFO_DIR)/licenses
> -LICENSE_FILES_DIR_HOST=$(LEGAL_INFO_DIR)/host-licenses
> -LEGAL_MANIFEST_CSV_TARGET=$(LEGAL_INFO_DIR)/manifest.csv
> -LEGAL_MANIFEST_CSV_HOST=$(LEGAL_INFO_DIR)/host-manifest.csv
> -LEGAL_LICENSES_TXT_TARGET=$(LEGAL_INFO_DIR)/licenses.txt
> -LEGAL_LICENSES_TXT_HOST=$(LEGAL_INFO_DIR)/host-licenses.txt
> -LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
> -LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
> -
> -BR2_CONFIG=$(CONFIG_DIR)/.config
> +HOST_DIR := $(BASE_DIR)/host

 Neither does this one.

> +
> +LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
> +REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
> +REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
> +LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
> +LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
> +LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
> +LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
> +LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
> +LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
> +LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
> +LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
> +
> +BR2_CONFIG = $(CONFIG_DIR)/.config
>  
>  # Pull in the user's configuration file
>  ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
> @@ -181,22 +181,22 @@ endif
>  # Use 'make V=1' to see the full commands
>  ifdef V
>    ifeq ("$(origin V)", "command line")
> -    KBUILD_VERBOSE=$(V)
> +    KBUILD_VERBOSE = $(V)
>    endif
>  endif
>  ifndef KBUILD_VERBOSE
> -  KBUILD_VERBOSE=0
> +  KBUILD_VERBOSE = 0
>  endif
>  
>  ifeq ($(KBUILD_VERBOSE),1)
> -  quiet=
> -  Q=
> +  quiet =
> +  Q =

 These are not needed.

>  ifndef VERBOSE
> -  VERBOSE=1
> +  VERBOSE = 1
>  endif
>  else
> -  quiet=quiet_
> -  Q=@
> +  quiet = quiet_

 quiet is not used. It is exported though, which is probably a bad idea
anyway.

> +  Q = @
>  endif
>  
>  # we want bash as shell
> @@ -205,56 +205,56 @@ SHELL:=$(shell if [ -x "$$BASH" ]; then echo $$BASH; \
>  	else echo sh; fi; fi)
>  
>  # kconfig uses CONFIG_SHELL
> -CONFIG_SHELL:=$(SHELL)
> +CONFIG_SHELL := $(SHELL)
>  
>  export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE

 CONFIG_SHELL should be passed with the rest of the kconfig environment,
not exported.

>  
>  ifndef HOSTAR
> -HOSTAR:=ar
> +HOSTAR := ar

 No := needed.

>  endif
>  ifndef HOSTAS
>  HOSTAS:=as

 Same here.

>  endif
>  ifndef HOSTCC
> -HOSTCC:=gcc
> -HOSTCC:=$(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
> +HOSTCC := gcc
> +HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
>  endif
>  HOSTCC_NOCCACHE:=$(HOSTCC)
>  ifndef HOSTCXX
> -HOSTCXX:=g++
> -HOSTCXX:=$(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
> +HOSTCXX := g++
> +HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
>  endif
> -HOSTCXX_NOCCACHE:=$(HOSTCXX)
> +HOSTCXX_NOCCACHE := $(HOSTCXX)

 Here := is needed!

>  ifndef HOSTFC
> -HOSTFC:=gfortran
> +HOSTFC := gfortran

 No :=

>  endif
>  ifndef HOSTCPP
>  HOSTCPP:=cpp

 Idem.

>  endif
>  ifndef HOSTLD
> -HOSTLD:=ld
> +HOSTLD := ld

 Idem. Etc. etc.

>  endif
>  ifndef HOSTLN
> -HOSTLN:=ln
> +HOSTLN := ln
>  endif
>  ifndef HOSTNM
> -HOSTNM:=nm
> +HOSTNM := nm
>  endif
>  ifndef HOSTOBJCOPY
> -HOSTOBJCOPY:=objcopy
> +HOSTOBJCOPY := objcopy
>  endif
>  ifndef HOSTRANLIB
> -HOSTRANLIB:=ranlib
> -endif
> -HOSTAR:=$(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
> -HOSTAS:=$(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
> -HOSTFC:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
> -HOSTCPP:=$(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
> -HOSTLD:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
> -HOSTLN:=$(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
> -HOSTNM:=$(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
> -HOSTOBJCOPY:=$(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
> -HOSTRANLIB:=$(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
> +HOSTRANLIB := ranlib
> +endif
> +HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
> +HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
> +HOSTFC := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
> +HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
> +HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
> +HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
> +HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
> +HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
> +HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
>  
>  export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
>  export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
> @@ -291,7 +291,7 @@ unexport CONFIG_SITE
>  unexport QMAKESPEC
>  unexport TERMINFO
>  
> -GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
> +GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
>  
>  ################################################################################
>  #
> @@ -300,15 +300,15 @@ GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
>  #
>  ################################################################################
>  
> -TARGETS:= toolchain
> +TARGETS := toolchain

 Since TARGETS is only updated with +=, no := is needed here either.

>  
>  # silent mode requested?
> -QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
> +QUIET := $(if $(findstring s,$(MAKEFLAGS)),-q)
>  
>  # Strip off the annoying quoting

 This comment is redundant.

> -ARCH:=$(call qstrip,$(BR2_ARCH))
> +ARCH := $(call qstrip,$(BR2_ARCH))

 No :=

>  
> -KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
> +KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
>  	-e s/i.86/i386/ -e s/sun4u/sparc64/ \
>  	-e s/arcle/arc/ \
>  	-e s/arceb/arc/ \
> @@ -320,28 +320,28 @@ KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
>  	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
>  	-e s/sh.*/sh/)
>  
> -ZCAT:=$(call qstrip,$(BR2_ZCAT))
> -BZCAT:=$(call qstrip,$(BR2_BZCAT))
> -XZCAT:=$(call qstrip,$(BR2_XZCAT))
> -TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
> +ZCAT := $(call qstrip,$(BR2_ZCAT))
> +BZCAT := $(call qstrip,$(BR2_BZCAT))
> +XZCAT := $(call qstrip,$(BR2_XZCAT))

 Dito.

> +TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
>  
>  # packages compiled for the host go here
> -HOST_DIR:=$(call qstrip,$(BR2_HOST_DIR))
> +HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))

 Dito

>  
>  # locales to generate
> -GENERATE_LOCALE=$(call qstrip,$(BR2_GENERATE_LOCALE))
> +GENERATE_LOCALE = $(call qstrip,$(BR2_GENERATE_LOCALE))
>  
> -TARGET_SKELETON=$(TOPDIR)/system/skeleton
> +TARGET_SKELETON = $(TOPDIR)/system/skeleton
>  
>  # Location of a file giving a big fat warning that output/target
>  # should not be used as the root filesystem.
> -TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
> +TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
>  
>  ifeq ($(BR2_CCACHE),y)
> -CCACHE:=$(HOST_DIR)/usr/bin/ccache
> +CCACHE := $(HOST_DIR)/usr/bin/ccache
>  BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
>  export BR_CACHE_DIR
> -HOSTCC  := $(CCACHE) $(HOSTCC)
> +HOSTCC := $(CCACHE) $(HOSTCC)
>  HOSTCXX := $(CCACHE) $(HOSTCXX)
>  endif
>  
> @@ -394,23 +394,23 @@ include system/system.mk
>  include $(BR2_EXTERNAL)/external.mk
>  
>  ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
> -TARGETS+=target-purgelocales
> +TARGETS += target-purgelocales
>  endif
>  
>  ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
>  ifneq ($(GENERATE_LOCALE),)
> -TARGETS+=target-generatelocales
> +TARGETS += target-generatelocales
>  endif
>  endif
>  
>  ifeq ($(BR2_ECLIPSE_REGISTER),y)
> -TARGETS+=toolchain-eclipse-register
> +TARGETS += toolchain-eclipse-register
>  endif
>  
>  include fs/common.mk
>  
> -TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS))
> -TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
> +TARGETS_SOURCE := $(patsubst %,%-source,$(TARGETS))
> +TARGETS_DIRCLEAN := $(patsubst %,%-dirclean,$(TARGETS))

 No need for :=

>  
>  # host-* dependencies have to be handled specially, as those aren't
>  # visible in Kconfig and hence not added to a variable like TARGETS.
> @@ -430,7 +430,7 @@ HOST_DEPS = $(sort $(foreach dep,\
>  		$($(dep))))
>  HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
>  
> -TARGETS_LEGAL_INFO:=$(patsubst %,%-legal-info,\
> +TARGETS_LEGAL_INFO := $(patsubst %,%-legal-info,\
>  		$(TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))

 Dito.

>  
>  dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
> @@ -483,7 +483,7 @@ $(STAGING_DIR):
>  	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
>  
>  ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
> -TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
> +TARGET_SKELETON = $(BR2_ROOTFS_SKELETON_CUSTOM_PATH)

 Missing qstrip.



 Regards,
 Arnout


>  endif
>  
>  RSYNC_VCS_EXCLUSIONS = \
> @@ -577,8 +577,8 @@ endif
>  		$(USER_HOOKS_EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
>  
>  ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
> -LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
> -LOCALE_NOPURGE=$(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
> +LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
> +LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
>  
>  target-purgelocales:
>  	rm -f $(LOCALE_WHITELIST)
> @@ -682,7 +682,7 @@ endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
>  # configuration
>  # ---------------------------------------------------------------------------
>  
> -HOSTCFLAGS=$(CFLAGS_FOR_BUILD)
> +HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
>  export HOSTCFLAGS
>  
>  $(BUILD_DIR)/buildroot-config/%onf:
> @@ -911,7 +911,7 @@ endif
>  	@echo 'See docs/README, or generate the Buildroot manual for further details'
>  	@echo
>  
> -release: OUT=buildroot-$(BR2_VERSION)
> +release: OUT = buildroot-$(BR2_VERSION)
>  
>  # Create release tarballs. We need to fiddle a bit to add the generated
>  # documentation to the git output
> 


-- 
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F