From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Tue, 25 Mar 2014 23:54:54 +0100 Subject: [Buildroot] [PATCH 2 of 4] qwt: use TARGET_MAKE_ENV when running make and qmake In-Reply-To: <163c8448b6f2a17be27d.1395257407@argentina> References: <163c8448b6f2a17be27d.1395257407@argentina> Message-ID: <5332093E.9010006@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 19/03/14 20:30, Thomas De Schampheleire wrote: > This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command > lines, to make sure PATH is set correctly, and to line up with the qt5 > packages that do this consistently. > > Signed-off-by: Thomas De Schampheleire Acked-by: Arnout Vandecappelle (Essensium/Mind) > > --- > package/qwt/qwt.mk | 4 ++-- > 1 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/package/qwt/qwt.mk b/package/qwt/qwt.mk > --- a/package/qwt/qwt.mk > +++ b/package/qwt/qwt.mk > @@ -28,11 +28,11 @@ endif > > define QWT_CONFIGURE_CMDS > $(SED) $(QWT_CONFIG) $(@D)/qwtconfig.pri > - (cd $(@D); $(QT_QMAKE)) > + (cd $(@D); $(TARGET_MAKE_ENV) $(QT_QMAKE)) > endef > > define QWT_BUILD_CMDS > - $(MAKE) -C $(@D) > + $(TARGET_MAKE_ENV) $(MAKE) -C $(@D) > endef > > # After installation, we fixup the INSTALL_PREFIX in qwtconfig.pri so > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F