From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] Autobuilder news
Date: Sat, 10 May 2014 22:28:27 +0200 [thread overview]
Message-ID: <536E8BEB.7020300@mind.be> (raw)
In-Reply-To: <20140504223611.5a6177c1@skate>
On 04/05/14 22:36, Thomas Petazzoni wrote:
> Hello,
>
> Two news about the autobuilders:
>
> * The Crosstool-NG external toolchain configurations have been updated
> and slightly extended. Yann E. Morin has provided me with a good set
> of more up-to-date toolchains generated by Crosstool-NG, and I've
> added them to the Free Electrons autobuilders, as a replacement for
> the old ones. The new configurations are:
>
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/armv5-ctng-linux-gnueabi.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/armv6-ctng-linux-uclibcgnueabi.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/armv7-ctng-linux-gnueabihf.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/i486-ctng-linux-uclibc.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/i686-ctng-linux-gnu.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/mips64el-ctng_n32-linux-gnu.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/mips64el-ctng_n64-linux-gnu.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/mipsel-ctng-linux-uclibc.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/powerpc-ctng_e500v2-linux-gnuspe.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/powerpc-ctng-linux-uclibc.config
> http://autobuild.buildroot.org/toolchains/configs/free-electrons/x86_64-ctng_locales-linux-gnu.config
Hi Thomas,
Is it possible that you installed new binaries with the same name but a
different ctng configuration? That's a bit annoying because it breaks
reproducibility... It's OK to remove the old toolchains, but it would be good if
the new ones would have a different name.
Regards,
Arnout
>
> * As stated in another e-mail, the Free Electrons autobuilder
> machine has been updated. It has twice the amount of RAM it used
> to have (16 GB replaced by 32 GB), and a better storage system (SAS
> 10k disks instead of regular disks). Hopefully this should allow to
> have more configurations tested every day.
>
> Best regards,
>
> Thomas
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2014-05-10 20:28 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-04 20:36 [Buildroot] Autobuilder news Thomas Petazzoni
2014-05-04 21:32 ` Luca Ceresoli
2014-05-10 20:28 ` Arnout Vandecappelle [this message]
2014-05-11 16:07 ` Thomas Petazzoni
2014-05-11 16:29 ` Thomas Petazzoni
2014-05-11 20:37 ` Arnout Vandecappelle
2014-05-11 21:14 ` Thomas Petazzoni
-- strict thread matches above, loose matches on Subject: below --
2014-08-29 21:26 Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536E8BEB.7020300@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox