From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jean-Christophe DUBOIS Date: Wed, 27 Aug 2014 07:45:34 +0200 Subject: [Buildroot] [PATCH v6] bcache-tools: Adding package. In-Reply-To: <53E502F0.5060306@tribudubois.net> References: <1407514262-18602-1-git-send-email-jcd@tribudubois.net> <53E502F0.5060306@tribudubois.net> Message-ID: <53FD707E.30505@tribudubois.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi, It has been few weeks now and I did not receive any more comments. Is there some more work you are expecting from me or is there any other reason this could not be accepted/committed? Thanks. JC Le 08/08/2014 07:03 PM, Jean-Christophe DUBOIS a ?crit : > I did not add the Makefile patch for the man8 directory as I agree > with Thomas that the bcache-tools package should be modified upstream > to allow install without this dir. > > Meanwhile, we can add the man8 dir which is removed by BR afterward. > > JC > > Le 08/08/2014 06:11 PM, Jean-Christophe DUBOIS a ?crit : >> This is the bcache tools, required to setup the linux bcache >> feature of the Linux kernel. >> >> Signed-off-by: Jean-Christophe DUBOIS >> --- >> Changes v1 to v2 >> * Remove 'support' word from comment statement in Config.in. >> * Use github helper to get the project site instead of hardcoded URL. >> Changes v2 to v3 >> * Added bcache-tools description in Config help. >> * Added bcache-tools URL in Config help. >> * Added BR2_LARGEFILE BR2_USE_WCHAR and BR2_USE_MMU dependencies in >> Config. >> * Added BR2_PACKAGE_UTIL_LINUX selection in Config. >> * Added new requirements in Config comment. >> * Use POST_EXTRACT_HOOKS to modify Makefile. >> * Pass $(TARGET_CONFIGURE_OPTS) in env variables to $(MAKE). >> * Create man8 dir as part of PRE_INSTALL_TARGET_HOOKS. >> Changes v3 to v4 >> * Move from .zip file to .tar.gz as download file in .mk file. >> * Use complete git tag as version in .mk file. >> * Remove explicit extract rule from .mk file (use implicite rule). >> Changes v4 to v5 >> * Remove explicit package name in .mk (rely on default behavior). >> Changes v5 to v6 >> * Switch spaces to tabs in Config.in >> * Don't patch Makefile for pkg-config in .mk file. >> --- >> package/Config.in | 1 + >> package/bcache-tools/Config.in | 22 ++++++++++++++++++++++ >> package/bcache-tools/bcache-tools.mk | 31 >> +++++++++++++++++++++++++++++++ >> 3 files changed, 54 insertions(+) >> create mode 100644 package/bcache-tools/Config.in >> create mode 100644 package/bcache-tools/bcache-tools.mk >> >> diff --git a/package/Config.in b/package/Config.in >> index 4520ba6..dc2f418 100644 >> --- a/package/Config.in >> +++ b/package/Config.in >> @@ -280,6 +280,7 @@ endmenu >> source "package/a10disp/Config.in" >> source "package/acpid/Config.in" >> source "package/avrdude/Config.in" >> + source "package/bcache-tools/Config.in" >> source "package/cdrkit/Config.in" >> source "package/cryptsetup/Config.in" >> source "package/cwiid/Config.in" >> diff --git a/package/bcache-tools/Config.in >> b/package/bcache-tools/Config.in >> new file mode 100644 >> index 0000000..a3f7897 >> --- /dev/null >> +++ b/package/bcache-tools/Config.in >> @@ -0,0 +1,22 @@ >> +config BR2_PACKAGE_BCACHE_TOOLS >> + bool "bcache tools" >> + depends on BR2_PACKAGE_HAS_UDEV >> + depends on BR2_LARGEFILE # util-linux >> + depends on BR2_USE_WCHAR # util-linux >> + depends on BR2_USE_MMU # util-linux (libblkid) >> + select BR2_PACKAGE_UTIL_LINUX >> + select BR2_PACKAGE_UTIL_LINUX_LIBUUID >> + select BR2_PACKAGE_UTIL_LINUX_LIBBLKID >> + help >> + Bcache is a Linux kernel block layer cache. It allows one or >> + more fast disk drives such as flash-based solid state drives >> (SSDs) >> + to act as a cache for one or more slower hard disk drives. >> + >> + http://bcache.evilpiepirate.org/ >> + >> + This is the user space bcache tools, required to setup the linux >> + bcache feature of the Linux kernel. >> + >> +comment "bcache-tools needs udev /dev management and a toolchain w/ >> largefile, wchar" >> + depends on BR2_USE_MMU >> + depends on !BR2_PACKAGE_HAS_UDEV || !BR2_LARGEFILE || >> !BR2_USE_WCHAR >> diff --git a/package/bcache-tools/bcache-tools.mk >> b/package/bcache-tools/bcache-tools.mk >> new file mode 100644 >> index 0000000..880bf5e >> --- /dev/null >> +++ b/package/bcache-tools/bcache-tools.mk >> @@ -0,0 +1,31 @@ >> +################################################################################ >> >> +# >> +# bcache-tools >> +# >> +################################################################################ >> >> + >> +BCACHE_TOOLS_VERSION = v1.0.7 >> +BCACHE_TOOLS_SITE = $(call >> github,g2p,bcache-tools,$(BCACHE_TOOLS_VERSION)) >> +BCACHE_TOOLS_LICENSE = GPLv2 >> +BCACHE_TOOLS_LICENSE_FILES = COPYING >> +BCACHE_TOOLS_DEPENDENCIES = host-pkgconf util-linux eudev >> + >> +# We pass $(TARGET_CONFIGURE_OPTS) as environment variable to allow >> +# the bcache-tools Makefile to alter CFLAGS >> +define BCACHE_TOOLS_BUILD_CMDS >> + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) >> +endef >> + >> +# The bcache-tools Makefile expects the man8 directory to exist. >> +define BCACHE_TOOLS_INSTALL_MAN8 >> + $(INSTALL) -m 0755 -d $(TARGET_DIR)/usr/share/man/man8 >> +endef >> + >> +BCACHE_TOOLS_PRE_INSTALL_TARGET_HOOKS += BCACHE_TOOLS_INSTALL_MAN8 >> + >> +define BCACHE_TOOLS_INSTALL_TARGET_CMDS >> + $(TARGET_MAKE_ENV) $(TARGET_CONFIGURE_OPTS) $(MAKE) -C $(@D) \ >> + DESTDIR=$(TARGET_DIR) install >> +endef >> + >> +$(eval $(generic-package)) > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot >