From: Arnout Vandecappelle <arnout@mind.be>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH] socfpga-cyclone5 Dev board support
Date: Sun, 12 Oct 2014 16:06:00 +0200 [thread overview]
Message-ID: <543A8AC8.9000808@mind.be> (raw)
In-Reply-To: <1399342751-7799-1-git-send-email-cdhmanning@gmail.com>
On 06/05/14 04:19, Charles Manning wrote:
> This is somewhat derived from the SocKit booard support.
>
> It uses a fresher Linux and u-boot than SocKit. It also speeds the
> serial port up to 115200.
>
> Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Hi Charles,
Sorry for the late response - better late than never :).
Basically, it looks good to me, so
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
but I have some minor comments below.
> ---
> board/altera/cyclone5/post-image.sh | 10 ++++++++++
> board/altera/cyclone5/readme.txt | 3 +++
> configs/altera_cyclone5_defconfig | 29 +++++++++++++++++++++++++++++
> 3 files changed, 42 insertions(+)
> create mode 100755 board/altera/cyclone5/post-image.sh
> create mode 100644 board/altera/cyclone5/readme.txt
> create mode 100644 configs/altera_cyclone5_defconfig
>
> diff --git a/board/altera/cyclone5/post-image.sh b/board/altera/cyclone5/post-image.sh
> new file mode 100755
> index 0000000..ad70922
> --- /dev/null
> +++ b/board/altera/cyclone5/post-image.sh
> @@ -0,0 +1,10 @@
> +#!/bin/sh
> +#
> +# Altera Cyclone 5 Development Board post processing.
> +#
> +# A rip-off of the Sockit board support
> +# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
> +# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
> +
> +# create a DTB file copy with the name expected by the u-boot config
> +cp -af $BINARIES_DIR/socfpga_cyclone5_socdk.dtb $BINARIES_DIR/socfpga.dtb
Since it is a single file, -a is a bit weird. And personally I'd make it an
ln -f instead, but that's a matter of taste.
> diff --git a/board/altera/cyclone5/readme.txt b/board/altera/cyclone5/readme.txt
> new file mode 100644
> index 0000000..fe5a758
> --- /dev/null
> +++ b/board/altera/cyclone5/readme.txt
> @@ -0,0 +1,3 @@
> +Modifications to make a Cyclone 5 setup. This is derived from the buildroot
> +config first done for SocKit board. See boards/altera/sockit
Maybe it's better to copy at least part of the text from that readme, because
not all of it applies (e.g. the U-Boot patch).
> +
> diff --git a/configs/altera_cyclone5_defconfig b/configs/altera_cyclone5_defconfig
> new file mode 100644
> index 0000000..df3b8c6
> --- /dev/null
> +++ b/configs/altera_cyclone5_defconfig
> @@ -0,0 +1,29 @@
> +BR2_arm=y
> +BR2_cortex_a9=y
> +BR2_ARM_EABIHF=y
> +BR2_ARM_ENABLE_NEON=y
> +BR2_ARM_FPU_NEON=y
> +BR2_ARM_INSTRUCTIONS_THUMB2=y
> +BR2_KERNEL_HEADERS_VERSION=y
> +BR2_DEFAULT_KERNEL_VERSION="3.13.5"
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/cyclone5/post-image.sh"
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CUSTOM_GIT=y
> +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.rocketboards.org/linux-socfpga.git"
> +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-3.13_14.02.02"
If you repost, could you try with rel_socfpga-3.16_14.09.02 ? That would of
course also mean updating the kernel headers version.
> +BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
> +BR2_LINUX_KERNEL_ZIMAGE=y
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_socdk"
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_3=y
> +BR2_TARGET_UBOOT=y
> +BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
> +BR2_TARGET_UBOOT_CUSTOM_GIT=y
> +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.rocketboards.org/u-boot-socfpga.git"
> +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_socfpga_v2013.01.01_14.02.02"
Same here.
Regards,
Arnout
> +BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR="board/altera/cyclone5"
> +BR2_TARGET_UBOOT_FORMAT_IMG=y
> +BR2_TARGET_UBOOT_SPL=y
> +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286500
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
next prev parent reply other threads:[~2014-10-12 14:06 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 2:19 [Buildroot] [PATCH] socfpga-cyclone5 Dev board support Charles Manning
2014-10-12 14:06 ` Arnout Vandecappelle [this message]
2015-07-12 22:00 ` [Buildroot] [PATCH v2] configs: add altera_socdk_defconfig for Altera Cyclone 5 Development Board Arnout Vandecappelle
2015-07-13 0:10 ` Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=543A8AC8.9000808@mind.be \
--to=arnout@mind.be \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox