From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Mon, 24 Aug 2015 23:16:54 +0200 Subject: [Buildroot] eUdev Label Issues In-Reply-To: References: Message-ID: <55DB89C6.7010801@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 08/13/2015 04:07 AM, Christian Stewart wrote: > Hi all, > > I'm using buildroot to compile a system for an odroid XU4. > > Here's my defconfig: http://pastebin.com/raw.php?i=ETU9d160 > > Seemingly randomly, my udev device labels will be messed up. > > ls /dev/disk/by-label/ > boot layer rogtfs swap > > After a reboot there's a 50% chance it will be correct: > > ls /dev/disk/by-label/ > boot layer rootfs swap > > I'm using an SD card with a msdos partition table made with gparted. I'm using > fat16, ext2, ext4, linux-swap for the partitions, respectively. > > Any idea why this would happen? It's always rogtfs, once I saw layer spelled > daqer, and boot spelled bogt. Note that all of these bitflips are in the same bit. So I guess you have a hardware problem, possibly a timing issue.. Regards, Arnout > > Thanks! > Christian > > > _______________________________________________ > buildroot mailing list > buildroot at busybox.net > http://lists.busybox.net/mailman/listinfo/buildroot > -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF