From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Thu, 10 Sep 2015 10:19:04 +0200 Subject: [Buildroot] Xorg Segmentation fault now. Please help In-Reply-To: References: Message-ID: <55F13CF8.3070706@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 10-09-15 09:15, Lennart Ramberg wrote: > Hello, > > After having been away from Buildroot since last year, I'm at it again. > But I had a setback; > > With 2014.11 the xorg-server runs allright. > Jumping to 2015.08.1 the xorg-server won't run. > Why might this be? Please help. > > Below is a part of my /var/log/Xorg.0.log after I executed 'X', > as well as my defconfig (and there is nothing suspicious in the overlays). > And I did a 'make clean all' first. I know nothing about X, but here are a few tips: - I see you are using ccache. That is still not 100% reliable, so perhaps try again with turning ccache off and do a make clean all. - You could disable the intel driver and enable e.g. VESA or fbdev to isolate where the issue is. - You could try to vary the kernel and gcc versions. And of course, check the Xorg bug tracker. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF