From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Wed, 14 Oct 2015 23:55:54 +0200 Subject: [Buildroot] [PATCH 2/2] toolchain-external: bypass buildroot wrapper In-Reply-To: <20151014233106.416d10e6@free-electrons.com> References: <20151011120859.7e786a73@free-electrons.com> <1444856755-2011-1-git-send-email-arnout@mind.be> <1444856755-2011-2-git-send-email-arnout@mind.be> <20151014233106.416d10e6@free-electrons.com> Message-ID: <561ECF6A.5000908@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 14-10-15 23:31, Thomas Petazzoni wrote: > Arnout, > > On Wed, 14 Oct 2015 23:05:55 +0200, Arnout Vandecappelle > (Essensium/Mind) wrote: > >> Lightly tested with an internal toolchain, an external Sourcery >> toolchain, an external downloaded buildroot toolchain, and an external >> pre-installed buildroot toolchain. > > Did you test with a pre-existing Buildroot toolchain (i.e that predates > the introduction of the wrapper for internal toolchain), or did you > build a Buildroot toolchain with the latest Buildroot (including your > patches) and then re-used it as an external toolchain in another > Buildroot configuration ? I built a toolchain with buildroot, i.e. including wrapper and .br_real, tarred it and downloaded it. Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF