From: Aleksandar Simeonov <aleksandar@barix.com>
To: buildroot@busybox.net
Subject: [Buildroot] Adding custom config files to a package
Date: Tue, 12 Apr 2016 15:36:32 +0200 [thread overview]
Message-ID: <570CF9E0.3000609@barix.com> (raw)
Hi Gustavo,
Sorry to disturb you again, but back to our discussion sometime ago on
#buildroot IRC channel:
Now I'm trying to implement your idea to use <pkg>_config files to copy
some custom configuration target once the main package is built.
The idea works great, however it has certain drawbacks - It is executed
only the first time you build the main package, and then gets added to
the rootfs.jffs image. As soon as I have the image built, any make runs
after that do not rut through it, as if it is not detected as a
dependency. This is bit of a problem because when rebuilding the image
(for this I clean the target folder before that), the make does not copy
the <pkg> relevant files to the output/target folder, and thus not
propagating them to the image :( Is there anything I can do about it?
I have tried adding a Config.in file, and source it in the main
Config.in file in my BR2_EXTERNAL folder, but then the make tries to
"compile" it, and fails with "No scheme" message. I assume that do not
need to run $(eval $(whatever-package)) at the end because it is not a
real package, so commenting it solves the compilation error, but still
is not run
Attached I'm sending an example for configuring dropbear package. In my
main Config.in file I source this one, and the path to the makefile is
included in my external.mk
Could you advise something in this case?
Thank you very much in advance
Alex
-------------- next part --------------
#############################################################
#
# UCI
#
#############################################################
UCI_VERSION = 825be5d0cd699919fbad15901c63044f0efffe82
UCI_SITE = git://nbd.name/uci.git
UCI_DEPENDENCIES = rsync
ifeq ($(BR2_PACKAGE_LUA),y)
UCI_CONF_OPTS = -DBUILD_LUA=ON
UCI_DEPENDENCIES += lua
else
UCI_CONF_OPTS = -DBUILD_LUA=OFF
endif
UCI_INSTALL_STAGING = YES
#UCI_INSTALL_TARGET = YES
UCI_UCI_DEFAULTS_FILES = package/uci/defaults/*
define UCI_INSTALL_INIT_SYSV
if [ ! -f $(TARGET_DIR)/etc/init.d/mount_config ]; then \
$(INSTALL) -m 0755 -D package/uci/rc/mount_config $(TARGET_DIR)/etc/init.d/mount_config; \
fi
if [ ! -h $(TARGET_DIR)/etc/rcS.d/S10mount_config ]; then \
ln -s ../init.d/mount_config $(TARGET_DIR)/etc/rcS.d/S10mount_config ; \
fi
if [ ! -h $(TARGET_DIR)/etc/rc0.d/K80umount_config ]; then \
ln -s ../init.d/mount_config $(TARGET_DIR)/etc/rc0.d/K80umount_config ; \
fi
if [ ! -h $(TARGET_DIR)/etc/rc6.d/K80umount_config ]; then \
ln -s ../init.d/mount_config $(TARGET_DIR)/etc/rc6.d/K80umount_config ; \
fi
endef
define UCI_INSTALL_TARGET_CMDS
$(INSTALL) -d -m 0755 $(TARGET_DIR)/lib/config
$(INSTALL) -D -m 0755 package/uci/bin/functions.sh $(TARGET_DIR)/lib/config/functions.sh
$(INSTALL) -D -m 0755 $(@D)/uci $(TARGET_DIR)/sbin
$(INSTALL) -D -m 0755 $(@D)/uci-static $(TARGET_DIR)/sbin
$(INSTALL) -D -m 0755 $(@D)/libuci.so $(TARGET_DIR)/lib
#$(INSTALL) -D -m 0755 $(@D)/libuci.a $(TARGET_DIR)/lib
endef
define UCI_UNINSTALL_TARGET_CMDS
$(RM) $(TARGET_DIR)/lib/config/functions.sh
$(RM) $(TARGET_DIR)/sbin/uci
$(RM) $(TARGET_DIR)/sbin/uci-static
$(RM) $(TARGET_DIR)/lib/libuci.so
#$(RM) -f $(TARGET_DIR)/lib/libuci.a
endef
$(eval $(cmake-package))
-------------- next part --------------
menu "Barix System configuration (applications and kernel modules)"
menu "Base system"
source "$BR2_EXTERNAL/package/barix/syswatchdog/Config.in"
source "$BR2_EXTERNAL/package/barix/web_ui/Config.in"
source "$BR2_EXTERNAL/package/barix/sys_id/Config.in"
source "$BR2_EXTERNAL/package/barix/updater/Config.in"
source "$BR2_EXTERNAL/package/override/uci/Config.in"
config BR2_PACKAGE_BARIX_CONFIG_SUBSYSTEM
bool "Configuration subsystem"
select BR2_PACKAGE_UCI
config BR2_UCI_TEMPLATE_DIR
string "Directory path to store UCI templates"
default "/barix/config/templates"
config BR2_UCI_DEFAULTS_DIR
string "Directory path to store UCI defaults"
default "/barix/config/defaults"
help
UCI based configuration subsystem that provides
dynamic configuration via Web UI, automatic service
restarting, database of parameters, import/export,
default parameters, etc.
http://www.barix.com/
### source "package/barix/hardware/Config.in"
source "$BR2_EXTERNAL/package/barix/factory_info_mng/Config.in"
source "$BR2_EXTERNAL/package/barix/reset_reader/Config.in"
source "$BR2_EXTERNAL/package/barix/logs/Config.in"
source "$BR2_EXTERNAL/package/barix/ntp2hwclocksync/Config.in"
source "$BR2_EXTERNAL/package/barix/rtc_ctl/Config.in"
source "$BR2_EXTERNAL/package/barix/cron/Config.in"
config BR2_PACKAGE_BARIX_SYSTEM_SERVICES
bool "Autoselect system services"
select BR2_PACKAGE_IFPLUGD
select BR2_PACKAGE_NTP
select BR2_PACKAGE_NTP_NTPD
select BR2_PACKAGE_NTP_NTPDATE
select BR2_PACKAGE_NTP_NTPQ
help
Automatically selects following system services:
link monitoring (ifplugd), NTP
source "$BR2_EXTERNAL/package/barix/watchdog/Config.in"
source "$BR2_EXTERNAL/package/barix/locale_timezone/Config.in"
source "$BR2_EXTERNAL/package/barix/audio_level_adjust/Config.in"
source "$BR2_EXTERNAL/package/barix/alsa_4channel_adjust/Config.in"
source "$BR2_EXTERNAL/package/barix/hello_world/Config.in"
endmenu
menu "Features"
source "$BR2_EXTERNAL/package/barix/binary_discovery/Config.in"
source "$BR2_EXTERNAL/package/barix/sonic_ip/Config.in"
source "$BR2_EXTERNAL/package/barix/leds/Config.in"
source "$BR2_EXTERNAL/package/barix/display_ctl/Config.in"
endmenu
choice
prompt "Main application"
default BR2_PACKAGE_NO_APPLICATION
config BR2_PACKAGE_NO_APPLICATION
bool "no application"
help
No default application
source "$BR2_EXTERNAL/package/barix/ferdinand/Config.in"
source "$BR2_EXTERNAL/package/barix/hubertus/Config.in"
source "$BR2_EXTERNAL/package/barix/hubrec/Config.in"
source "$BR2_EXTERNAL/package/barix/soundscape/Config.in"
source "$BR2_EXTERNAL/package/barix/remote_spot/Config.in"
endchoice
menu "Debug"
source "$BR2_EXTERNAL/package/barix/cpp_unit/Config.in"
endmenu
menu "Production"
source "$BR2_EXTERNAL/package/barix/production_test/Config.in"
endmenu
menu "Version management"
# copied from packages/barix/sys_id/Config.in
if BR2_PACKAGE_SYS_ID
comment "Firmware Global"
config BR2_PACKAGE_SYS_ID_OBJID
string "System/Product ID"
config BR2_PACKAGE_SYS_ID_FW_VERSION
string "Firmware version"
endif
comment "Kernel"
# copied from linux/Config.in
if BR2_LINUX_KERNEL_CUSTOM_GIT
config BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION
string "Kernel GIT tag/version"
default "HEAD"
endif
comment "Bootloader"
# copied from uboot/Config.in
if BR2_TARGET_UBOOT_CUSTOM_GIT
config BR2_TARGET_UBOOT_CUSTOM_GIT_VERSION
string "U-Boot GIT tag/version"
endif
comment "Applications"
if BR2_PACKAGE_FERDINAND
config BR2_FERDINAND_GIT_VERSION
string "Store & Play Git tag/version"
default "develop"
endif
if BR2_PACKAGE_SOUNDSCAPE
config BR2_SOUNDSCAPE_GIT_VERSION
string "Soundscape GIT tag/version"
default "develop"
endif
if BR2_PACKAGE_DISPLAY_CTL
config BR2_DISPLAY_CTL_GIT_VERSION
string "Display controller GIT tag/version"
default "develop"
endif
comment "Libraries"
if BR2_PACKAGE_CPP_UNIT
config BR2_CPP_UNIT_GIT_VERSION
string "CPP Unit lib GIT tag/version"
default "master"
endif
comment "System components"
if BR2_PACKAGE_BINARY_DISCOVERY
config BR2_BINARY_DISCOVERY_GIT_VERSION
string "Binary discovery GIT tag/version"
default "master"
endif
if BR2_PACKAGE_FACTORY_INFO_MNG
config BR2_FACTORY_INFO_MNG_GIT_VERSION
string "Factory info manager GIT tag/version"
default "master"
endif
if BR2_PACKAGE_LEDS
config BR2_LEDS_GIT_VERSION
string "LED manager GIT tag/version"
default "master"
endif
if BR2_PACKAGE_RESET_READER
config BR2_RESET_READER_GIT_VERSION
string "Reset Reader GIT tag/version"
default "master"
endif
if BR2_PACKAGE_UPDATER
config BR2_UPDATER_GIT_VERSION
string "Barix Updater GIT tag/version"
default "master"
endif
if BR2_PACKAGE_WATCHDOG
config BR2_WATCHDOG_GIT_VERSION
string "Application SW watchdog GIT tag/version"
default "master"
endif
if BR2_PACKAGE_WEB_UI
config BR2_WEB_UI_GIT_VERSION
string "System Web UI GIT tag/version"
default "master"
endif
endmenu
menu "Configuration packages"
if BR2_PACKAGE_DROPBEAR
source "$BR2_EXTERNAL/package/config/dropbear_config/Config.in"
endif
endmenu
endmenu
next reply other threads:[~2016-04-12 13:36 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-12 13:36 Aleksandar Simeonov [this message]
2016-04-12 22:03 ` [Buildroot] Adding custom config files to a package Arnout Vandecappelle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=570CF9E0.3000609@barix.com \
--to=aleksandar@barix.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox