From mboxrd@z Thu Jan 1 00:00:00 1970 From: Arnout Vandecappelle Date: Thu, 21 Apr 2016 22:55:03 +0200 Subject: [Buildroot] [PATCH] uboot build and deploy added to juno board In-Reply-To: References: Message-ID: <57193E27.2070801@mind.be> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 04/20/16 19:47, Joao Pinto wrote: > This patch has the goal to add to the juno board defconfig the u-boot build > configurations. The juno board readme file was also updated with the > necessary steps to build the ARM Trusted Firmware (with u-boot in it) and > how to deploy it. > > Signed-off-by: Joao Pinto > --- [snip] > diff --git a/configs/arm_juno_defconfig b/configs/arm_juno_defconfig > index 87b6374..9ed4258 100644 > --- a/configs/arm_juno_defconfig > +++ b/configs/arm_juno_defconfig > @@ -12,3 +12,9 @@ BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y > BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/arm/juno/linux-juno-defconfig" > BR2_LINUX_KERNEL_DTS_SUPPORT=y > BR2_LINUX_KERNEL_INTREE_DTS_NAME="arm/juno arm/juno-r1" > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY=y > +BR2_TARGET_UBOOT_BOARDNAME="vexpress_aemv8a_juno" > +BR2_TARGET_UBOOT_CUSTOM_GIT=y > +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="http://git.denx.de/u-boot.git" > +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="v2016.03" Is there any reason to use a git clone rather than just downloading the tarball? I.e., doesn't this work: BR2_TARGET_UBOOT_CUSTOM_VERSION=y BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.03" Regards, Arnout -- Arnout Vandecappelle arnout at mind be Senior Embedded Software Architect +32-16-286500 Essensium/Mind http://www.mind.be G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle GPG fingerprint: 7493 020B C7E3 8618 8DEC 222C 82EB F404 F9AC 0DDF