From mboxrd@z Thu Jan 1 00:00:00 1970 From: Joao Pinto Date: Tue, 10 May 2016 10:00:30 +0100 Subject: [Buildroot] [PATCH 0/2] new package: atfirmware In-Reply-To: <20160509225510.GA18182@e106497-lin.cambridge.arm.com> References: <573057F0.3000606@synopsys.com> <20160509225510.GA18182@e106497-lin.cambridge.arm.com> Message-ID: <5731A32E.7080200@synopsys.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net On 5/9/2016 11:55 PM, Liviu.Dudau at arm.com wrote: > On Mon, May 09, 2016 at 10:27:12AM +0100, Joao Pinto wrote: >> Hi guys, >> I will have to give a Juno training soon, and this feature would be great to >> have in the time. Could you comment of the atfirmware patch? Do you have any >> improvement suggestions? > > It looks good to me but I have no ACK powers in the buildroot world. > > I am traveling away from my Juno boards at the moment so I cannot add my Tested-by. > > Best regards, > Liviu Thanks Liviu! > >> >> Thanks. >> >> On 5/3/2016 11:13 AM, Joao Pinto wrote: >>> This patch adds to buildroot an important package for ARM64 based development >>> boards: The ARM Trusted Firmware (atfirmware). >>> It also adds the scpfirmware which is a hidden package to get the System Control >>> Processor (SCP) binary to be included in the bootloader (fip image), which is >>> a requirement for ARM Juno's board. With this 2 packages, Juno gets fully >>> supported in the Buildroot. >>> >>> Joao Pinto (2): >>> new packages: atfirmware and scpfirmware >>> configs: add u-noot and atfirmware options to juno >>> >>> board/arm/juno/readme.txt | 21 ++++++++-- >>> boot/Config.in | 2 + >>> boot/atfirmware/Config.in | 70 +++++++++++++++++++++++++++++++++ >>> boot/atfirmware/atfirmware.hash | 5 +++ >>> boot/atfirmware/atfirmware.mk | 85 +++++++++++++++++++++++++++++++++++++++++ >>> boot/scpfirmware/Config.in | 23 +++++++++++ >>> boot/scpfirmware/scpfirmware.mk | 18 +++++++++ >>> configs/arm_juno_defconfig | 9 +++++ >>> 8 files changed, 230 insertions(+), 3 deletions(-) >>> create mode 100644 boot/atfirmware/Config.in >>> create mode 100644 boot/atfirmware/atfirmware.hash >>> create mode 100644 boot/atfirmware/atfirmware.mk >>> create mode 100644 boot/scpfirmware/Config.in >>> create mode 100644 boot/scpfirmware/scpfirmware.mk >>> >> >