From mboxrd@z Thu Jan  1 00:00:00 1970
From: Sagaert Johan <sagaert.johan@skynet.be>
Date: Wed, 14 Dec 2011 16:15:35 +0100
Subject: [Buildroot] [PATCH 1/1] New package libmbus library for
	communicating with M-bus energy metering devices. not in
	latest git pull
In-Reply-To: <4EE4DB4D.8000605@lucaceresoli.net>
References: <1323559411-1383-1-git-send-email-sagaert.johan@skynet.be>
 <4EE4DB4D.8000605@lucaceresoli.net>
Message-ID: <71D1CCECD12D4938A05F122FB71F2AC4@JohanW7>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

Hi

I didn't notice the libmbus package in my latest git pull.
Is there something wrong wit hit ?

Johan


-----Oorspronkelijk bericht-----
Van: Luca Ceresoli [mailto:luca at lucaceresoli.net] 
Verzonden: zondag 11 december 2011 17:33
Aan: Sagaert Johan
CC: buildroot at busybox.net
Onderwerp: Re: [Buildroot] [PATCH 1/1] New package libmbus library for communicating with M-bus energy metering devices.

Sagaert Johan wrote:
> libmbus is an open source M-bus (Meter-Bus) library.
> The Meter-Bus is a standard for reading out meter data from electricity meters, heat meters, gas meters, etc.
>
> Signed-off-by: Sagaert Johan<sagaert.johan@skynet.be>

Reviewed-by: Luca Ceresoli<luca@lucaceresoli.net>

Thanks for contributing.

For future patch submissions, you should remember to add "v2" (then "v3", "v4"
etc) to the [PATCH] prefix each time you resubmit a patch with modifications.
This avoids confusion to the people reviewing and merging your patches.
Take a look in the mailing-list for examples.

Luca


> ---
>   package/Config.in          |    1 +
>   package/libmbus/Config.in  |    8 ++++++++
>   package/libmbus/libmbus.mk |   14 ++++++++++++++
>   3 files changed, 23 insertions(+), 0 deletions(-)
>   create mode 100644 package/libmbus/Config.in
>   create mode 100644 package/libmbus/libmbus.mk
>
> diff --git a/package/Config.in b/package/Config.in
> index eb93b1c..9e9027d 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -333,6 +333,7 @@ source "package/libmicrohttpd/Config.in"
>   source "package/neon/Config.in"
>   source "package/libmnl/Config.in"
>   source "package/libmodbus/Config.in"
> +source "package/libmbus/Config.in"
>   source "package/libnl/Config.in"
>   source "package/libpcap/Config.in"
>   source "package/libosip2/Config.in"
> diff --git a/package/libmbus/Config.in b/package/libmbus/Config.in
> new file mode 100644
> index 0000000..f545117
> --- /dev/null
> +++ b/package/libmbus/Config.in
> @@ -0,0 +1,8 @@
> +config BR2_PACKAGE_LIBMBUS
> +	bool "libmbus"
> +	help
> +	  libmbus is a library for communicating with energy metering devices.
> +	  It supports TCP and RS232 M-bus gateways.
> +	  (M-bus standard : http://www.m-bus.com/)
> +	
> +	  http://www.freescada.com/libmbus
> diff --git a/package/libmbus/libmbus.mk b/package/libmbus/libmbus.mk
> new file mode 100644
> index 0000000..a6d31da
> --- /dev/null
> +++ b/package/libmbus/libmbus.mk
> @@ -0,0 +1,14 @@
> +#############################################################
> +#
> +# libmbus
> +#
> +#############################################################
> +LIBMBUS_VERSION=0.6.1
> +LIBMBUS_SITE=http://www.freescada.com/public-dist/
> +LIBMBUS_INSTALL_STAGING=YES
> +
> +# Without this the build yields an error:
> +#   cannot find input file: `test/Makefile.in'
> +LIBMBUS_AUTORECONF=YES
> +
> +$(eval $(call AUTOTARGETS))