From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Mon, 20 Oct 2014 10:03:00 +0200 Subject: [Buildroot] [PATCH 1/2] mx53loco: update support In-Reply-To: <1413790693-8281-1-git-send-email-eric@eukrea.com> ("Eric =?utf-8?Q?B=C3=A9nard=22's?= message of "Mon, 20 Oct 2014 09:38:12 +0200") References: <1413790693-8281-1-git-send-email-eric@eukrea.com> Message-ID: <8738ajcgnf.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Eric" == Eric B?nard writes: > - update bootloader to 2014.07 with fslc patches fslc? Do you mean Freescale? > - update kernel to 2.6.35_maintain branch which contains latest fixes > - defconfig was then generated by savedefconfig which suppressed and > reordered some items which explains the number of lines changed. > Tested on an i.MX53 QSB and an i.MX53 QSB-R > Signed-off-by: Eric B?nard > --- > configs/mx53loco_defconfig | 24 +++++++++--------------- > 1 file changed, 9 insertions(+), 15 deletions(-) > diff --git a/configs/mx53loco_defconfig b/configs/mx53loco_defconfig > index 8b12238..6e59e5b 100644 > --- a/configs/mx53loco_defconfig > +++ b/configs/mx53loco_defconfig > @@ -1,22 +1,16 @@ > -# Architecture > BR2_arm=y > BR2_cortex_a8=y > -BR2_ARM_FPU_VFPV3D16=y > - > -# System > BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" > -BR2_TARGET_UBOOT=y > -BR2_TARGET_UBOOT_BOARDNAME="mx53_loco" > -BR2_TARGET_UBOOT_CUSTOM_GIT=y > -BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.freescale.com/imx/uboot-imx.git" > -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_imx_2.6.35_11.09.01" > - > -# filesystem > -BR2_TARGET_ROOTFS_EXT2=y > - > -# Kernel I prefer to keep the section comments, but OK. > BR2_LINUX_KERNEL=y > BR2_LINUX_KERNEL_CUSTOM_GIT=y > BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-2.6-imx.git" > -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_2.6.35_11.09.01" > +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="imx_2.6.35_maintain" _VERSION has to uniquely specify a revision, so it must be a tag or a sha1 - And not a branch. So use b3912bb8a4caf3ec50909135e88af959982c43ca instead. > BR2_LINUX_KERNEL_DEFCONFIG="imx5" > +BR2_LINUX_KERNEL_ZIMAGE=y > +BR2_TARGET_ROOTFS_EXT2=y > +BR2_TARGET_UBOOT=y > +BR2_TARGET_UBOOT_BOARDNAME="mx53loco" > +BR2_TARGET_UBOOT_CUSTOM_GIT=y > +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://github.com/Freescale/u-boot-imx.git" The github page seems to redirect this to u-boot-fslc - So perhaps use that instead? > +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="patches-2014.07" Same comment as for the kernel. -- Bye, Peter Korsgaard