From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Mon, 26 Nov 2018 18:48:30 +0100 Subject: [Buildroot] [PATCH v2 1/1] linux: Make dtc install step more reliable In-Reply-To: <20181113155016.24022-1-anaumann@ultratronik.de> (Andreas Naumann's message of "Tue, 13 Nov 2018 16:50:16 +0100") References: <20181113155016.24022-1-anaumann@ultratronik.de> Message-ID: <874lc3vifl.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Andreas" == Andreas Naumann writes: > Checking for the existence of the dtc binary built by the > non-dependent dtc package may cause instable behaviour when giving more > freedom on the order of how the packages are built (parallelization). > In addidion, when moving to per-package host/target method, the check > would always trigger in the isolated host, leading to linux-dtc always > being installed as dtc. > This in turn may lead to undesired overwriting of the real host-dtc binary > when finally assembling the global host dir. > Thus rework the linux-dtc install condition to be defined by configuration > rather than compile time order. > Signed-off-by: Andreas Naumann > --- > Changes v1 -> v2: > - simplified by direct usage of make conditional almost as suggested by > Arnout (test revealed that an additinal comma was needed for correct logic) Committed to 2018.02.x and 2018.08.x, thanks. -- Bye, Peter Korsgaard