[Buildroot] [PATCH next] board: add support for nexbox a95x

[Peter Korsgaard <peter@korsgaard.com>]

>>>>> "Peter" == Peter Korsgaard <peter@korsgaard.com> writes:

 > Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
 > (quad A53), 8/16GB eMMC and 1/2GB RAM.

 > Both the s905 (gxbb) and s905x (gxl) variant is supported.

 > This defconfig uses mainline Linux.  As the mainline support for s905 is
 > quite young, use the latest release candidate.  There is currently no
 > support for this board in U-Boot or sources available for the vendor U-Boot,
 > so the defconfig doesn't build a u-boot and instead uses the existing U-Boot
 > available in the eMMC.  This also means that we need to wrap the kernel as
 > uImage, which isn't suppported for aarch64.  Instead this is done in the
 > post-build script.

 > Mainline aarch64 defconfig builds most drivers modular, so add mdev for
 > module autoloading.

 > Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

Committed to next after explicitly setting BR2_cortex_a53=y in the
defconfig.

-- 
Bye, Peter Korsgaard