Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Korsgaard <jacmet@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 3/6] default to EABI on arm
Date: Tue, 06 Oct 2009 20:35:13 +0200	[thread overview]
Message-ID: <87ab042wwu.fsf@macbook.be.48ers.dk> (raw)
In-Reply-To: <6fe0ac8fa1f42152f604ca708aff08b8f119073a.1254853146.git.rep.dot.nop@gmail.com> (Bernhard Reutner-Fischer's message of "Tue\, 6 Oct 2009 20\:26\:05 +0200")

>>>>> "Bernhard" == Bernhard Reutner-Fischer <rep.dot.nop@gmail.com> writes:

 Bernhard> Use of OABI is strongly discouraged since years now.
 Bernhard> Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
 Bernhard> ---
 Bernhard>  target/Config.in.arch |    9 ++++++---
 Bernhard>  1 files changed, 6 insertions(+), 3 deletions(-)

 Bernhard> diff --git a/target/Config.in.arch b/target/Config.in.arch
 Bernhard> index e63fc02..e82c8f4 100644
 Bernhard> --- a/target/Config.in.arch
 Bernhard> +++ b/target/Config.in.arch
 Bernhard> @@ -116,14 +116,17 @@ config BR2_ARM_TYPE
 Bernhard>  choice
 Bernhard>  	prompt "Target ABI"
 Bernhard>  	depends on BR2_arm || BR2_armeb
 Bernhard> -	default BR2_ARM_OABI
 Bernhard> +	default BR2_ARM_EABI

Ok.

-- 
Bye, Peter Korsgaard

  parent reply	other threads:[~2009-10-06 18:35 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-06 18:26 [Buildroot] [PATCH 0/6] misc config-cleanup Bernhard Reutner-Fischer
2009-10-06 18:26 ` [Buildroot] [PATCH 1/6] atmel mirrors are only needed for atmel targets Bernhard Reutner-Fischer
2009-10-06 18:26   ` [Buildroot] [PATCH 2/6] always append FPU_SUFFIX Bernhard Reutner-Fischer
2009-10-06 18:26     ` [Buildroot] [PATCH 3/6] default to EABI on arm Bernhard Reutner-Fischer
2009-10-06 18:26       ` [Buildroot] [PATCH 4/6] improve arch selection and gcc setup Bernhard Reutner-Fischer
2009-10-06 18:26         ` [Buildroot] [PATCH 5/6] mark odd strip invocations Bernhard Reutner-Fischer
2009-10-06 18:26           ` [Buildroot] [PATCH 6/6] remove superfluous OPTIMIZE and DEBUG config knobs Bernhard Reutner-Fischer
2009-10-06 18:41             ` Peter Korsgaard
2009-10-06 18:49               ` Bernhard Reutner-Fischer
2009-10-06 20:35                 ` Thomas Petazzoni
2009-10-07  6:47                   ` Bernhard Reutner-Fischer
2009-10-07  7:03                     ` Peter Korsgaard
2009-10-07  7:14                       ` Bernhard Reutner-Fischer
2009-10-06 18:34           ` [Buildroot] [PATCH 5/6] mark odd strip invocations Peter Korsgaard
2009-10-06 18:42             ` Bernhard Reutner-Fischer
2009-10-06 18:51               ` Peter Korsgaard
2009-10-06 20:01                 ` Olaf Rempel
2009-10-07  6:41                   ` Bernhard Reutner-Fischer
2009-10-07  7:51                   ` Peter Korsgaard
2009-10-06 18:36         ` [Buildroot] [PATCH 4/6] improve arch selection and gcc setup Peter Korsgaard
2009-10-06 18:44           ` Bernhard Reutner-Fischer
2009-10-06 18:51             ` Peter Korsgaard
2009-10-07 18:26               ` Bernhard Reutner-Fischer
2009-10-06 18:35       ` Peter Korsgaard [this message]
2009-10-06 21:07       ` [Buildroot] [PATCH 3/6] default to EABI on arm Peter Korsgaard
2009-10-06 18:34     ` [Buildroot] [PATCH 2/6] always append FPU_SUFFIX Peter Korsgaard
2009-10-06 18:40       ` Bernhard Reutner-Fischer
2009-10-06 18:47         ` Peter Korsgaard
2009-10-06 20:31           ` Thomas Petazzoni
2009-10-06 20:30       ` Thomas Petazzoni
2009-10-06 18:32   ` [Buildroot] [PATCH 1/6] atmel mirrors are only needed for atmel targets Peter Korsgaard
2009-10-06 21:07   ` Peter Korsgaard
2009-10-06 21:13     ` [Buildroot] [PATCH 1/6] atmel mirrors are only needed for atmeltargets H Hartley Sweeten
2009-10-06 21:28       ` Peter Korsgaard
2009-10-06 18:32 ` [Buildroot] [PATCH 0/6] misc config-cleanup Peter Korsgaard
2009-10-06 20:31   ` Thomas Petazzoni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87ab042wwu.fsf@macbook.be.48ers.dk \
    --to=jacmet@uclibc.org \
    --cc=buildroot@busybox.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox