From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Tue, 26 Apr 2011 20:18:04 +0200 Subject: [Buildroot] Buildroot 2011.02 images won't load on Qemu with qemu_arm_versatile_defconfig In-Reply-To: (Dwi Sasongko Supriyadi's message of "Tue, 26 Apr 2011 21:55:07 +0700") References: <87ipu15or2.fsf@macbook.be.48ers.dk> Message-ID: <87d3k8512b.fsf@macbook.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Dwi" == Dwi Sasongko Supriyadi writes: Hi, Dwi> I tried to use versatile config from git, but there is still the Dwi> same result. Qemu stopped after compressing Linux. Dwi> Please correct me if I am wrong, is following the?versatile Dwi> config?difference between 2011.02 and buildroot from git correct? Yes, that's it. Getty on the first serial port and use 2.6.38.3 rather than 2.6.36. Dwi> I am a little bit puzzled but also surprised knowing that only Dwi> older kernel version can be used ... should this be known as Qemu Dwi> issue? Dwi> Using 2.6.27.58 with CS toolchain or BR toolchain the image result Dwi> can be used flawlessly, but not with 2.6.36/37/38. I am worried Dwi> also with the fact that my qemu gets segfault when missing -m Dwi> parameter. I am running Ubuntu Lucid with Qemu version Dwi> 0.12.3. Could you please confirm your Qemu version? This all sounds very odd. I use: $ qemu-system-arm -version QEMU PC emulator version 0.12.5 (Debian 0.12.5+dfsg-3), Copyright (c) 2003-2008 Fabrice Bellard So with the qemu_arm_versatile_defconfig without any changes and the qemu-system-arm arguments exactly as I said you don't get any output at all? -- Bye, Peter Korsgaard