From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Thu, 03 Dec 2009 16:49:55 +0100 Subject: [Buildroot] Problems connecting to AT91SAM9260 In-Reply-To: <20091203154314.237790@gmx.net> (Jens Kleinhans's message of "Thu, 03 Dec 2009 16:43:14 +0100") References: <20091203154314.237790@gmx.net> Message-ID: <87eincrra4.fsf@macbook.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Jens" == Jens Kleinhans writes: Hi, Jens> I want to connect to the ARM board mentioned in the subject with Jens> minicom. Jens> So I connected the board with the RS232 interface and the USB_D Jens> interface to my host PC and configured minicom with the following Jens> parameters: Jens> 115200, 8bits, 1stop, no parity, no flow Jens> Then I powered up the board. It started sending some datas to minicom Jens> about the boot process. Then it ended up with the lines: Jens> Uncompressing Linux...RomBOOT >> RomBOOT Why are you sending this to the buildroot and rtai lists? An atmel list / support seems like a better option. -- Bye, Peter Korsgaard