Re: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: transition to tarballs

From: Peter Korsgaard <peter@korsgaard.com>
To: Neal Frager <neal.frager@amd.com>, michal.simek@xilinx.com
Cc: luca@lucaceresoli.net, giulio.benetti@benettiengineering.com,
	buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH v1 2/2] configs/zynqmp_zcu106_defconfig: transition to tarballs
Date: Wed, 04 May 2022 08:49:09 +0200	[thread overview]
Message-ID: <87h7653i8q.fsf@dell.be.48ers.dk> (raw)
In-Reply-To: <20220503152425.1069617-2-neal.frager@amd.com> (Neal Frager's message of "Tue, 3 May 2022 09:24:25 -0600")

>>>>> "Neal" == Neal Frager <neal.frager@amd.com> writes:

 > This patch migrates configs/zynqmp_zcu106_defconfig to tarballs for TF-A, u-boot and Linux.
 > This patch has zero change in code running on the device.
 > The goal is to improve build speed and align with the zynq_xxx_defconfigs.

 > Signed-off-by: Neal Frager <neal.frager@amd.com>

Committed, thanks.

Notice: I'm still seeing noisy warnings from the kernel during boot, did
you hear back from Michal abot that?

[    4.384715] zynqmp-display fd4a0000.display: vtc bridge property not present
[    4.393156] ------------[ cut here ]------------
[    4.397776] More than allowed devices are using the vpll_int, which is forbidden
[    4.405204] WARNING: CPU: 1 PID: 7 at drivers/clk/zynqmp/pll.c:200 zynqmp_pll_set_rate+0x198/0x200
[    4.414160] Modules linked in:
[    4.417208] CPU: 1 PID: 7 Comm: kworker/u8:0 Not tainted 5.15.19 #1
[    4.423465] Hardware name: ZynqMP ZCU106 RevA (DT)
[    4.428250] Workqueue: events_unbound deferred_probe_work_func
[    4.434081] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.441033] pc : zynqmp_pll_set_rate+0x198/0x200
[    4.445642] lr : zynqmp_pll_set_rate+0x198/0x200
[    4.450251] sp : ffffffc009523660
[    4.453558] x29: ffffffc009523660 x28: ffffff887f7f6458 x27: ffffff8801d8b810
[    4.460694] x26: 000000000000b61b x25: ffffff88014e7600 x24: 0000000000000060
[    4.467828] x23: 0000000001fca055 x22: ffffff88014e7600 x21: ffffff88014e7680
[    4.474963] x20: 000000000169cfa1 x19: 0000000059682ef1 x18: 0000000000000030
[    4.482098] x17: 6962726f66207369 x16: 206863696877202c x15: 746e695f6c6c7076
[    4.489233] x14: 2065687420676e69 x13: 6e6564646962726f x12: ffffffc00936b9b0
[    4.496368] x11: 0000000000000141 x10: 6c6c707620656874 x9 : 00000000fffff7ff
[    4.503503] x8 : ffffffc0093979b0 x7 : 000000000000bfe8 x6 : 80000000fffff800
[    4.510638] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
[    4.517773] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffffff880009ad80
[    4.524909] Call trace:
[    4.527348]  zynqmp_pll_set_rate+0x198/0x200
[    4.531609]  clk_change_rate+0x148/0x2c0
[    4.535523]  clk_core_set_rate_nolock+0x154/0x240
[    4.540220]  clk_set_rate+0x38/0x150
[    4.543787]  xilinx_dp_codec_probe+0xd4/0x1f0
[    4.548136]  platform_probe+0x68/0xe0
[    4.551790]  really_probe.part.0+0x9c/0x310
[    4.555965]  __driver_probe_device+0x98/0x150
[    4.560314]  driver_probe_device+0x44/0x120

> ---
 >  configs/zynqmp_zcu106_defconfig | 15 ++++++---------
 >  1 file changed, 6 insertions(+), 9 deletions(-)

 > diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig
 > index c8b507f0db..96b15eea81 100644
 > --- a/configs/zynqmp_zcu106_defconfig
 > +++ b/configs/zynqmp_zcu106_defconfig
 > @@ -3,9 +3,8 @@ BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_5_15=y
 >  BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynqmp/post-build.sh"
 >  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
 >  BR2_LINUX_KERNEL=y
 > -BR2_LINUX_KERNEL_CUSTOM_GIT=y
 > -BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/Xilinx/linux-xlnx.git"
 > -BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="xlnx_rebase_v5.15_LTS_2022.1"
 > +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
 > +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v5.15_LTS_2022.1)/xlnx_rebase_v5.15_LTS_2022.1.tar.gz"
 >  BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynqmp"
 >  BR2_LINUX_KERNEL_DTS_SUPPORT=y
 >  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu106-revA"
 > @@ -14,16 +13,14 @@ BR2_TARGET_ROOTFS_EXT2=y
 >  BR2_TARGET_ROOTFS_EXT2_4=y
 >  # BR2_TARGET_ROOTFS_TAR is not set
 >  BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
 > -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
 > -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://github.com/Xilinx/arm-trusted-firmware.git"
 > -BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="xlnx_rebase_v2.6_2022.1"
 > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL=y
 > +BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,arm-trusted-firmware,xlnx_rebase_v2.6_2022.1)/xlnx_rebase_v2.6_2022.1.tar.gz"
 >  BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="zynqmp"
 >  BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL31_UBOOT=y
 >  BR2_TARGET_UBOOT=y
 >  BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 > -BR2_TARGET_UBOOT_CUSTOM_GIT=y
 > -BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/Xilinx/u-boot-xlnx.git"
 > -BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="xlnx_rebase_v2022.01_2022.1"
 > +BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
 > +BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,u-boot-xlnx,xlnx_rebase_v2022.01_2022.1)/xlnx_rebase_v2022.01_2022.1.tar.gz"
 >  BR2_TARGET_UBOOT_BOARD_DEFCONFIG="xilinx_zynqmp_virt"
 >  BR2_TARGET_UBOOT_CONFIG_FRAGMENT_FILES="board/zynqmp/zcu106/uboot.fragment"
 >  BR2_TARGET_UBOOT_NEEDS_DTC=y
 > -- 

 > 2.17.1

-- 
Bye, Peter Korsgaard
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot