From mboxrd@z Thu Jan 1 00:00:00 1970 From: Baruch Siach Date: Tue, 20 Nov 2018 18:57:40 +0200 Subject: [Buildroot] [PATCH next 4/5] configs/solidrun_macchiatobin_mainline: bump kernel and U-Boot In-Reply-To: <20181120163104.wxmaqro2yukllssf@bars> References: <2ef4e9d2b5fff465da879d99e412437ea7109b66.1542720610.git.baruch@tkos.co.il> <20181120163104.wxmaqro2yukllssf@bars> Message-ID: <87h8gbfzzv.fsf@tkos.co.il> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Hi Sergey, Sergey Matyukevich writes: >> Bump U-Boot to version 2018.11. This version supports autodetection of >> SD/eMMC boot source, so we can now enable environment load from SD card. >> Add a U-Boot kconfig fragment that sets SD/eMMC as environment load/save >> device. This avoids stale environment values from the SPI flash. That in >> turn, allows to use the more convenient distro boot which is enabled in >> the default environment. >> >> Bump kernel to version 4.19.2. This version enables >> CONFIG_PHY_MVEBU_CP110_COMPHY in the arm64 defconfig, so remove it from >> the kernel kconfig fragment. Enable support for SFP modules detection >> and configuration. Leave the PHY drivers for now to keep them built into >> the kernel. The kernel defconfig builds these drivers as modules. But >> that does not work as expected in the default configuration. >> >> Cc: Sergey Matyukevich >> Signed-off-by: Baruch Siach >> --- >> board/solidrun/macchiatobin/extlinux.conf | 4 ++++ >> board/solidrun/macchiatobin/linux-extras.config | 2 +- >> board/solidrun/macchiatobin/post-build-mainline.sh | 5 +++++ >> board/solidrun/macchiatobin/uboot-fragment.config | 2 ++ >> configs/solidrun_macchiatobin_mainline_defconfig | 13 ++++++++----- >> 5 files changed, 20 insertions(+), 6 deletions(-) >> create mode 100644 board/solidrun/macchiatobin/extlinux.conf >> create mode 100755 board/solidrun/macchiatobin/post-build-mainline.sh >> create mode 100644 board/solidrun/macchiatobin/uboot-fragment.config > > Thanks! Verified the changes on MacchiatoBin v2 board: > > Tested-by: Sergey Matyukevich Thanks. > By the way, it looks like mainline U-Boot v2018.11 still detects only 2GiB > of DRAM on my boards. Meanwhile vendor U-Boot provided by alternative > config solidrun_macchiatobin_marvell_defconfig detects 4GiB. Support for RAM size detection on Armada 8K platforms is pending: http://git.denx.de/?p=u-boot/u-boot-marvell.git;a=commitdiff;h=2b4d964718c0e78a24f3a5e051e7dd9bc0e547c2 The next U-Boot release should have this support. baruch -- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{= - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -