From: Peter Korsgaard <jacmet@uclibc.org>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH v2 2/2] udev: bump to 181 and other fixes
Date: Wed, 08 Feb 2012 22:07:54 +0100 [thread overview]
Message-ID: <87k43x3ufp.fsf@macbook.be.48ers.dk> (raw)
In-Reply-To: <1328694625-17204-2-git-send-email-yegorslists@googlemail.com> (yegorslists@googlemail.com's message of "Wed, 8 Feb 2012 10:50:25 +0100")
>>>>> "yegorslists" == yegorslists <yegorslists@googlemail.com> writes:
yegorslists> From: Yegor Yefremov <yegorslists@googlemail.com>
yegorslists> Changes:
yegorslists> - Linux kernel requirement: 2.6.34 and above (devtmpfs is mandatory)
yegorslists> (this also applies to the chosen toolchain, because of Kernel headers)
yegorslists> - optional dependency on libusb and usbutils removed
yegorslists> - added dependency on kmod
yegorslists> - added dependency on util-linux for libblkid
yegorslists> - install in /lib/udev instead of /usr/libexec/udev
yegorslists> - udevd moved to /lib/udev
yegorslists> - fixed path to pci.ids and usb.ids
yegorslists> - persistent rules generator is disabled by default, so option
yegorslists> is introduced to enable this option if desired
Thanks, committed with minor tweaks (see below).
yegorslists> +++ b/package/udev/Config.in
yegorslists> @@ -1,31 +1,39 @@
yegorslists> config BR2_PACKAGE_UDEV
yegorslists> bool "udev"
yegorslists> depends on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
yegorslists> + depends on BR2_LARGEFILE # util-linux
yegorslists> + depends on BR2_USE_WCHAR # util-linux
yegorslists> + select BR2_PACKAGE_UTIL_LINUX
yegorslists> + select BR2_PACKAGE_UTIL_LINUX_LIBBLKID
yegorslists> + select BR2_PACKAGE_KMOD
yegorslists> help
yegorslists> Userspace device daemon.
yegorslists> + udev requires a Linux kernel >= 2.6.34: it relies on devtmpfs.
yegorslists> +
The devtmpfs dependency is not really an issue as we already depend on
it for dynamic /dev handling.
yegorslists> comment "udev requires /dev mgmnt set to udev under System configuration"
yegorslists> depends on !BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
yegorslists> +
yegorslists> +comment "udev requires a toolchain with LARGEFILE + WCHAR support"
yegorslists> + depends on !(BR2_LARGEFILE && BR2_USE_WCHAR)
This doesn't really make sense to show here, so I moved it
target/generic where the user selects the /dev handling method. This
line would only be shown in situations where he couldn't select udev
anyway (as he hadn't selected BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV).
yegorslists> +++ b/package/udev/udev.mk
yegorslists> @@ -3,7 +3,7 @@
yegorslists> # udev
yegorslists> #
yegorslists> #############################################################
yegorslists> -UDEV_VERSION = 173
yegorslists> +UDEV_VERSION = 181
yegorslists> UDEV_SOURCE = udev-$(UDEV_VERSION).tar.bz2
yegorslists> UDEV_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/kernel/hotplug/
yegorslists> UDEV_INSTALL_STAGING = YES
yegorslists> @@ -11,20 +11,24 @@ UDEV_INSTALL_STAGING = YES
yegorslists> UDEV_CONF_OPT = \
yegorslists> --sbindir=/sbin \
yegorslists> --with-rootlibdir=/lib \
yegorslists> - --libexecdir=/lib/udev \
yegorslists> + --libexecdir=/lib \
yegorslists> + --with-usb-ids-path=/usr/share/hwdata/usb.ids \
yegorslists> + --with-pci-ids-path=/usr/share/hwdata/pci.ids \
yegorslists> + --with-firmware-path=/lib/firmware \
yegorslists> --disable-introspection
udevd now needs to link with librt as it calls mq_getattr() (which isn't
automatically done on uClibc), so I added UDEV_CONF_ENV += LIBS='-lt'
--
Bye, Peter Korsgaard
next prev parent reply other threads:[~2012-02-08 21:07 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-08 9:50 [Buildroot] [PATCH v2 1/2] kmod: bump to 5 yegorslists at googlemail.com
2012-02-08 9:50 ` [Buildroot] [PATCH v2 2/2] udev: bump to 181 and other fixes yegorslists at googlemail.com
2012-02-08 21:07 ` Peter Korsgaard [this message]
2012-02-09 7:26 ` Yegor Yefremov
2012-02-09 9:02 ` Thomas Petazzoni
2012-02-09 9:08 ` Yegor Yefremov
2012-02-09 11:50 ` Yegor Yefremov
2012-02-08 20:12 ` [Buildroot] [PATCH v2 1/2] kmod: bump to 5 Peter Korsgaard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k43x3ufp.fsf@macbook.be.48ers.dk \
--to=jacmet@uclibc.org \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox