From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Mon, 17 Dec 2012 21:44:21 +0100 Subject: [Buildroot] [PATCH] imx-lib: new package In-Reply-To: <50CF5987.90805@mind.be> (Arnout Vandecappelle's message of "Mon, 17 Dec 2012 18:42:31 +0100") References: <1355752131-31966-1-git-send-email-arnout@mind.be> <50CF5987.90805@mind.be> Message-ID: <87mwxc76je.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Arnout" == Arnout Vandecappelle writes: Arnout> On 17/12/12 14:48, Arnout Vandecappelle (Essensium/Mind) wrote: >> +if BR2_PACKAGE_IMX_LIB >> +choice >> + prompt "i.MX platform" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX25_3STACK >> + bool "imx25-3stack" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX27ADS >> + bool "imx27ads" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX37_3STACK >> + bool "imx37-3stack" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX50 >> + bool "imx50" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX51 >> + bool "imx51" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX53 >> + bool "imx53" >> + >> +config BR2_PACKAGE_IMX_LIB_PLATFORM_IMX6Q >> + bool "imx6q" >> + >> +endchoice Arnout> Here's a second issue that I'd like to get some feedback on: Arnout> gst-fsl-plugins also uses a PLATFORM definition, but the list of Arnout> platforms is slightly different: Arnout> MX28/MX233/MX25/MX27/MX31/MX35/MX37/MX51/MX53/MX50/MX5X/MX6 Arnout> Ideally the 'platform' should be defined only once, but where? Or Arnout> should I add all the platforms to gst-fsl-plugins with a select of the Arnout> appropriate imx-lib platform? We once talked about adding a SoC selection to buildroot, but decided it would be too much effort to maintain. Is the gst-fsl-plugins stuff still needed now that the coda driver is in mainline? Arnout> I can only test the mx6q because that's the only one for which Arnout> I have a board... Build-testing doesn't make a difference Arnout> because all platforms use the same API. I have access to mx28 / mx51 / mx53 / mx6q boards and could do some testing during christmas. -- Bye, Peter Korsgaard