From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Sun, 01 Feb 2009 19:57:27 +0100 Subject: [Buildroot] Atmel specific handling in buildroot In-Reply-To: <1233509597.5742.35.camel@elrond.atmel.com> (Ulf Samuelsson's message of "Sun\, 01 Feb 2009 18\:33\:17 +0100") References: <873af0mvws.fsf@macbook.be.48ers.dk> <874ozei4hg.fsf@macbook.be.48ers.dk> <1233502594.5742.24.camel@elrond.atmel.com> <87zlh6gmod.fsf@macbook.be.48ers.dk> <1233509597.5742.35.camel@elrond.atmel.com> Message-ID: <87vdrugf3c.fsf@macbook.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Ulf" == Ulf Samuelsson writes: Hi, Ulf> I dont think you will build correctly unless you use the Ulf> advanced kernel setting for the AVR32 and AT91. Huh, why wouldn't BR2_KERNEL_none work for those targets? Ulf> Copying the build configuration to the root file system Ulf> is in line with the open source model, since Ulf> it helps people to reproduce whatever is on the board Ulf> if they buy the product. Not only that, That info is required by the license. Ulf> If you want to debug something, then it is good to Ulf> know how it was configured. Ulf> If someone calls in with a board without this, then it is Ulf> too late to do anything about it. Ulf> Obviously, since I put it there, I want to have it ON Ulf> for all my customers. Fine, that's why we have the configuration in the first place I guess - But the question isn't about what you or your customers want, it's about what the default should be in BR. It makes sense to default these to off like for everything else, so I'll remove the atmel special case. Ulf> As for the copyto, this is a convenience, and people Ulf> can configure whatever they want. Ulf> I find that it saves time to have this on. Again, feel free to use it, but it shouldn't be default (E.G. it breaks the build when you don't have a /tftpboot and/or it isn't writable. -- Bye, Peter Korsgaard