From mboxrd@z Thu Jan 1 00:00:00 1970 From: Peter Korsgaard Date: Mon, 04 Jul 2016 16:54:24 +0200 Subject: [Buildroot] [PATCH 2/2 v4] board: add support for Chromebook Snow In-Reply-To: <20160704144512.GA13296@vostro.localdomain> (Alex Suykov's message of "Mon, 4 Jul 2016 17:45:12 +0300") References: <20160105170013.GA18795@vostro> <87eg7ampx0.fsf@dell.be.48ers.dk> <20160704144512.GA13296@vostro.localdomain> Message-ID: <87zipxe9nj.fsf@dell.be.48ers.dk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net >>>>> "Alex" == Alex Suykov writes: > Sun, Jul 03, 2016 at 10:23:39PM +0200, Peter Korsgaard wrote: >> If you have time, it would be nice to verify that 4.6.3 works correctly >> and then send a patch to update the defconfig. > Just sent a patch. Thanks! > Since it's been a long time, I did full builds with the old 4.3 and > the new 4.6 configs using current buildroot git tree. Both were successful > and I had no problems booting them on the device. Great, good to hear! > One minor issue, savedefconfig does not add BR2_KERNEL_HEADERS_AS_KERNEL=y > into the defconfig, it seems to be the default setting. There's nothing > in the board config that would require specific headers version, so I left it > as is. Please check if that's ok. Yes, indeed - This is now our default setting if you are also building a Linux kernel, so it doesn't end up in the defconfig. -- Venlig hilsen, Peter Korsgaard