From mboxrd@z Thu Jan 1 00:00:00 1970 From: Ulf Samuelsson Date: Thu, 19 Feb 2009 14:39:30 +0100 Subject: [Buildroot] BR-2009.01 U-Boot not working on my AT91SAM9261ek Board References: <871vtubrym.fsf@macbook.be.48ers.dk> Message-ID: <8FBA208F64F44F5CB99ACBC50EE5CF84@aeglos> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net Sent: Thursday, February 19, 2009 12:12 PM Subject: Re: [Buildroot] BR-2009.01 U-Boot not working on my AT91SAM9261ek Board >>>>>> "QuickX" == QuickX writes: > > Hi, > > QuickX> I've finally had some time to attempt to update my project to > QuickX> BR-2009.02 and noticed some things, so thought I'd share. > > QuickX> 1. microperl (default config option) doesn't build on Kubuntu > QuickX> 8.10 (Make Errors). > > Details please. > > QuickX> 2. php (default config option) doesn't build on Kubuntu 8.10 > QuickX> (it doesn't try to download but complains it can't find it in > QuickX> the dl directory). > > Details please. > > QuickX> 3. U-Boot (Add architecture specific patch -> Add AT91 > QuickX> specific patches to u-Boot) causes u-Boot to not work on > QuickX> board. > > QuickX> Little more info on "3" is if this option is set (default) > QuickX> then Hyperterminal sits at the at91bootstrap message forever > QuickX> and doesn't load u-boot. If I turn this option off and then > QuickX> issue the following, it works. > U-Boot builds if you build manually: make sure that the buildroot toolchain is in your path. $make u-boot-unpacked (or similar) $ cd $(UBOOT_DIR) $ make $ make I have seen this problem as well, that is why I reintroduced the 1.2.0-atmel. > Sigh, Ulf - This is your mess, please sort it out. When I got time. > > -- > Bye, Peter Korsgaard > Best Regards Ulf Samuelsson ulf at atmel.com Atmel Nordic AB Mail: Box 2033, 174 02 Sundbyberg, Sweden Visit: Kavalleriv?gen 24, 174 58 Sundbyberg, Sweden Phone +46 (8) 441 54 22 Fax +46 (8) 441 54 29 GSM +46 (706) 22 44 57