* [Buildroot] fakeroot fails to compile using crosstools-ng toolchain
From: Thomas Petazzoni @ 2010-10-07 6:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <4CACF604.4080403@daccii.it>
Hello,
On Thu, 07 Oct 2010 00:19:48 +0200
Daniele Salvatore Albano - Lavoro <info@daccii.it> wrote:
> i got a strange error, related to largefile support i think, when i
> compile fakeroot. Large file support is enabled either on
> crosstools-ng and either on buildroot.
>
> Everything else compiled fine (i got an error related to gdb host
> package related to a symlink and an error with dnsmask related to
> libidn, but these aren't related to the fakeroot problem)
>
> Here i posted the fakeroot compilation log
> http://pastebin.com/8i8CbdMu
Yes, this is an issue that occurs when fakeroot is compiled for the
target. Obviously, it should be fixed, but in general, people do not
need fakeroot on the target, but only on the host.
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] fakeroot fails to compile using crosstools-ng toolchain
From: Daniele Salvatore Albano - Lavoro @ 2010-10-06 22:19 UTC (permalink / raw)
To: buildroot
Hi,
i got a strange error, related to largefile support i think, when i
compile fakeroot. Large file support is enabled either on crosstools-ng
and either on buildroot.
Everything else compiled fine (i got an error related to gdb host
package related to a symlink and an error with dnsmask related to
libidn, but these aren't related to the fakeroot problem)
Here i posted the fakeroot compilation log
http://pastebin.com/8i8CbdMu
Here buildroot config file and crosstools-ng config file
http://pastebin.com/5tJYGqu4
http://pastebin.com/Mm8hTKVg
I'm using buildroot from git repository and ct-ng 1.8.0 (br support that
version)
Any suggestions?
Best Regards,
Daniele
--
Daniele Salvatore Albano
Consulente Informatico
http://www.daccii.it
Servizi:
- Sviluppo di software di rete e standalone in C# e siti web PHP;
- Realizzazione di sistemi embedded con Buildroot;
- Realizzazione di CD di installazione di Ubuntu/Debian personalizzati;
- Installazione e Amministrazione sistemi basati su Debian, Ubuntu, CentOS e Fedora.
^ permalink raw reply
* [Buildroot] nptl depends on uclibc
From: Yann E. MORIN @ 2010-10-06 21:25 UTC (permalink / raw)
To: buildroot
In-Reply-To: <4CACDCA0.1040103@daccii.it>
Daniele, All,
On Wednesday 06 October 2010 22:31:28 Daniele Salvatore Albano - Lavoro wrote:
> i'm trying to setup a development system using ct-ng with eglibc but,
> while configuring stuff, i've seen that only linuxthreads and
> linuxthreads old are usable and not nptl.
> Looking at configuration file i've seen that there is a depends on
> uclibc snapshot.
> Is this correct? NPTL should be default, or, however, should be
> selectable when using eglibc and when using glibc.
This is a known issue. There is currently no way to tell buildroot that an
external toolchain is using NPTL.
There has been a discussion about in in the recent past, but I can't recall
what was the outcome...
Basically, buildroot should not have to know what threading implementation
is being used, as it has no partical user-visible impact. There are currently
only two packages that have dependency on NPTL: openvpn and ltp. For others,
you should be able to safely use an NPTL toolchain without telling buildroot.
I'll look into that during the WE, hopefully.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] nptl depends on uclibc
From: Khem Raj @ 2010-10-06 21:21 UTC (permalink / raw)
To: buildroot
In-Reply-To: <4CACDCA0.1040103@daccii.it>
On Wed, Oct 6, 2010 at 1:31 PM, Daniele Salvatore Albano - Lavoro
<info@daccii.it> wrote:
> ?Hi,
>
> i'm trying to setup a development system using ct-ng with eglibc but, while
> configuring stuff, i've seen that only linuxthreads and linuxthreads old are
> usable and not nptl.
>
> Looking at configuration file i've seen that there is a depends on uclibc
> snapshot.
>
> Is this correct? NPTL should be default,
default not yet. When uclibc releases with nptl then it can.
or, however, should be selectable
> when using eglibc and when using glibc.
thats a fair point.
>
> Thank you,
>
> Best Regards,
> Daniele
>
> --
> Daniele Salvatore Albano
> Consulente Informatico
> http://www.daccii.it
>
> Servizi:
> - Sviluppo di software di rete e standalone in C# e siti web PHP;
> - Realizzazione di sistemi embedded con Buildroot;
> - Realizzazione di CD di installazione di Ubuntu/Debian personalizzati;
> - Installazione e Amministrazione sistemi basati su Debian, Ubuntu, CentOS e
> Fedora.
>
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
>
^ permalink raw reply
* [Buildroot] nptl depends on uclibc
From: Daniele Salvatore Albano - Lavoro @ 2010-10-06 20:31 UTC (permalink / raw)
To: buildroot
Hi,
i'm trying to setup a development system using ct-ng with eglibc but,
while configuring stuff, i've seen that only linuxthreads and
linuxthreads old are usable and not nptl.
Looking at configuration file i've seen that there is a depends on
uclibc snapshot.
Is this correct? NPTL should be default, or, however, should be
selectable when using eglibc and when using glibc.
Thank you,
Best Regards,
Daniele
--
Daniele Salvatore Albano
Consulente Informatico
http://www.daccii.it
Servizi:
- Sviluppo di software di rete e standalone in C# e siti web PHP;
- Realizzazione di sistemi embedded con Buildroot;
- Realizzazione di CD di installazione di Ubuntu/Debian personalizzati;
- Installazione e Amministrazione sistemi basati su Debian, Ubuntu, CentOS e Fedora.
^ permalink raw reply
* [Buildroot] [git commit master 1/1] libmpeg2: fix Config.in indentation/typo
From: Peter Korsgaard @ 2010-10-06 15:30 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=a268b0528c8a00f84cc5b5240047b91ac281de7d
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Thanks to Thomas for noticing.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/multimedia/libmpeg2/Config.in | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/package/multimedia/libmpeg2/Config.in b/package/multimedia/libmpeg2/Config.in
index a3fafb0..3694689 100644
--- a/package/multimedia/libmpeg2/Config.in
+++ b/package/multimedia/libmpeg2/Config.in
@@ -6,8 +6,8 @@ config BR2_PACKAGE_LIBMPEG2
http://libmpeg2.sourceforge.net/
config BR2_PACKAGE_LIBMPEG2_BINS
- bool "mpeg2 binaries"
- depends on BR2_PACKAGE_LIBMPEG2
- help
- Install mpeg2dec, corrupt_mpeg2 and extrac_mpeg2 programs as
- well.
+ bool "mpeg2 binaries"
+ depends on BR2_PACKAGE_LIBMPEG2
+ help
+ Install mpeg2dec, corrupt_mpeg2 and extract_mpeg2 programs as
+ well.
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] package: add libmpeg2
From: Peter Korsgaard @ 2010-10-06 15:15 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20101006155307.574dcfb9@surf>
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> On Wed, 6 Oct 2010 11:48:58 +0200
Thomas> Peter Korsgaard <jacmet@sunsite.dk> wrote:
>> +config BR2_PACKAGE_LIBMPEG2_BINS
>> + bool "mpeg2 binaries"
>> + depends on BR2_PACKAGE_LIBMPEG2
>> + help
>> + Install mpeg2dec, corrupt_mpeg2 and extrac_mpeg2 programs as
>> + well.
Thomas> Tiny typos here: extracT_mpeg2 and incorrect indentation.
Argh, you're right - Will fix right away.
Seems I need more coffee.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit master 1/1] directfb: cleanup, use autotarget variables right away
From: Peter Korsgaard @ 2010-10-06 15:10 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=e99a9b2c22a32d4c840793780f7e0a44730def52
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Purely cosmetical.
Structure package like the other autotarget packages, and use
DIRECTFB_{CONF_OPT,DEPENDENCIES} right away instead of a number
of extra variables.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/directfb/directfb.mk | 158 ++++++++++++++++--------------------------
1 files changed, 61 insertions(+), 97 deletions(-)
diff --git a/package/directfb/directfb.mk b/package/directfb/directfb.mk
index 05d3673..e4b6d90 100644
--- a/package/directfb/directfb.mk
+++ b/package/directfb/directfb.mk
@@ -12,152 +12,116 @@ DIRECTFB_LIBTOOL_PATCH = NO
DIRECTFB_INSTALL_STAGING = YES
DIRECTFB_INSTALL_TARGET = YES
+DIRECTFB_CONF_OPT = \
+ --localstatedir=/var \
+ --enable-static \
+ --enable-shared \
+ --disable-explicit-deps \
+ --program-prefix='' \
+ --enable-zlib \
+ --enable-freetype \
+ --enable-fbdev \
+ --disable-sysfs \
+ --disable-sdl \
+ --disable-vnc \
+ --disable-osx \
+ --disable-video4linux \
+ --disable-video4linux2
+
+DIRECTFB_DEPENDENCIES = freetype zlib
+
ifeq ($(BR2_PACKAGE_DIRECTFB_MULTI),y)
-DIRECTFB_MULTI:=--enable-multi --enable-fusion
-DIRECTFB_FUSION:=linux-fusion
-else
-DIRECTFB_MULTI:=
-DIRECTFB_FUSION:=
+DIRECTFB_CONF_OPT += --enable-multi --enable-fusion
+DIRECTFB_DEPENDENCIES += linux-fusion
endif
ifeq ($(BR2_PACKAGE_DIRECTFB_DEBUG),y)
-DIRECTFB_DEBUG:=--enable-debug
-else
-DIRECTFB_DEBUG:=
+DIRECTFB_CONF_OPT += --enable-debug
endif
ifeq ($(BR2_PACKAGE_DIRECTFB_TRACE),y)
-DIRECTFB_TRACE:=--enable-trace
-else
-DIRECTFB_TRACE:=
+DIRECTFB_CONF_OPT += --enable-trace
endif
ifeq ($(BR2_PACKAGE_XSERVER),y)
-DIRECTFB_X:=--enable-x11
+DIRECTFB_CONF_OPT += --enable-x11
else
-DIRECTFB_X:=--disable-x11
+DIRECTFB_CONF_OPT += -disable-x11
endif
ifeq ($(BR2_PACKAGE_DIRECTFB_UNIQUE),y)
-DIRECTFB_UNIQUE:=--enable-unique
+DIRECTFB_CONF_OPT += --enable-unique
else
-DIRECTFB_UNIQUE:=--disable-unique
+DIRECTFB_CONF_OPT += --disable-unique
endif
-DIRECTFB_GFX:=
-ifeq ($(BR2_PACKAGE_DIRECTFB_ATI128),y)
-DIRECTFB_GFX+= ati128
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_CLE266),y)
-DIRECTFB_GFX+= cle266
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_CYBER5K),y)
-DIRECTFB_GFX+= cyber5k
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_MATROX),y)
-DIRECTFB_GFX+= matrox
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_PXA3XX),y)
-DIRECTFB_GFX+= pxa3xx
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_UNICHROME),y)
-DIRECTFB_GFX+= unichrome
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_I830),y)
-DIRECTFB_GFX+= i830
-endif
-ifeq ($(DIRECTFB_GFX),)
+DIRECTFB_GFX := \
+ $(if $(BR2_PACKAGE_DIRECTFB_ATI128),ati128) \
+ $(if $(BR2_PACKAGE_DIRECTFB_CLE266),cle266) \
+ $(if $(BR2_PACKAGE_DIRECTFB_CYBER5K),cyber5k) \
+ $(if $(BR2_PACKAGE_DIRECTFB_MATROX),matrox) \
+ $(if $(BR2_PACKAGE_DIRECTFB_PXA3XX),pxa3xx) \
+ $(if $(BR2_PACKAGE_DIRECTFB_UNICHROME),unichrome) \
+ $(if $(BR2_PACKAGE_DIRECTFB_I830),i830)
+
+ifeq ($(strip $(DIRECTFB_GFX)),)
DIRECTFB_GFX:=none
else
DIRECTFB_GFX:=$(subst $(space),$(comma),$(strip $(DIRECTFB_GFX)))
endif
-DIRECTFB_INPUT:=
-ifeq ($(BR2_PACKAGE_DIRECTFB_LINUXINPUT),y)
-DIRECTFB_INPUT+= linuxinput
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_KEYBOARD),y)
-DIRECTFB_INPUT+= keyboard
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_PS2MOUSE),y)
-DIRECTFB_INPUT+= ps2mouse
-endif
-ifeq ($(BR2_PACKAGE_DIRECTFB_SERIALMOUSE),y)
-DIRECTFB_INPUT+= serialmouse
-endif
+DIRECTFB_CONF_OPT += --with-gfxdrivers=$(DIRECTFB_GFX)
+
+DIRECTFB_INPUT := \
+ $(if $(BR2_PACKAGE_DIRECTFB_LINUXINPUT),linuxinput) \
+ $(if $(BR2_PACKAGE_DIRECTFB_KEYBOARD),keyboard) \
+ $(if $(BR2_PACKAGE_DIRECTFB_PS2MOUSE),ps2mouse) \
+ $(if $(BR2_PACKAGE_DIRECTFB_SERIALMOUSE),serialmouse) \
+ $(if $(BR2_PACKAGE_DIRECTFB_TSLIB),tslib)
+
ifeq ($(BR2_PACKAGE_DIRECTFB_TSLIB),y)
-DIRECTFB_INPUT+= tslib
-DIRECTFB_DEP+= tslib
+DIRECTFB_DEPENDENCIES += tslib
endif
-ifeq ($(DIRECTFB_INPUT),)
+
+ifeq ($(strip $(DIRECTFB_INPUT)),)
DIRECTFB_INPUT:=none
else
DIRECTFB_INPUT:=$(subst $(space),$(comma),$(strip $(DIRECTFB_INPUT)))
endif
+DIRECTFB_CONF_OPT += --with-inputdrivers=$(DIRECTFB_INPUT)
+
ifeq ($(BR2_PACKAGE_DIRECTFB_GIF),y)
-DIRECTFB_GIF:=--enable-gif
+DIRECTFB_CONF_OPT += --enable-gif
else
-DIRECTFB_GIF:=--disable-gif
+DIRECTFB_CONF_OPT += --disable-gif
endif
ifeq ($(BR2_PACKAGE_DIRECTFB_PNG),y)
-DIRECTFB_PNG:=--enable-png
-DIRECTFB_DEP+= libpng
+DIRECTFB_CONF_OPT += --enable-png
+DIRECTFB_DEPENDENCIES += libpng
DIRECTFB_CONF_ENV += ac_cv_path_LIBPNG_CONFIG=$(STAGING_DIR)/usr/bin/libpng-config
else
-DIRECTFB_PNG:=--disable-png
+DIRECTFB_CONF_OPT += --disable-png
endif
ifeq ($(BR2_PACKAGE_DIRECTFB_JPEG),y)
-DIRECTFB_JPEG:=--enable-jpeg
-DIRECTFB_DEP+= jpeg
+DIRECTFB_CONF_OPT += --enable-jpeg
+DIRECTFB_DEPENDENCIES += jpeg
else
-DIRECTFB_JPEG:=--disable-jpeg
+DIRECTFB_CONF_OPT += --disable-jpeg
endif
ifeq ($(BR2_PACKAGE_DIRECTB_DITHER_RGB16),y)
-DIRECTFB_DITHER_RGB16:=--with-dither-rgb16=advanced
+DIRECTFB_CONF_OPT += --with-dither-rgb16=advanced
else
-DIRECTFB_DITHER_RGB16:=--with-dither-rgb16=none
+DIRECTFB_CONF_OPT += --with-dither-rgb16=none
endif
ifeq ($(BR2_PACKAGE_DIRECTB_TESTS),y)
-DIRECTFB_TESTS:=--with-tests
-else
-DIRECTFB_TESTS:=
+DIRECTFB_CONF_OPT += --with-tests
endif
-DIRECTFB_CONF_OPT = \
- --localstatedir=/var \
- --with-gfxdrivers=$(DIRECTFB_GFX) \
- --with-inputdrivers=$(DIRECTFB_INPUT) \
- --enable-static \
- --enable-shared \
- --disable-explicit-deps \
- --program-prefix='' \
- $(DIRECTFB_MULTI) \
- $(DIRECTFB_DEBUG) \
- $(DIRECTFB_TRACE) \
- $(DIRECTFB_X) \
- $(DIRECTFB_JPEG) \
- $(DIRECTFB_PNG) \
- $(DIRECTFB_GIF) \
- $(DIRECTFB_UNIQUE) \
- $(DIRECTFB_DITHER_RGB16) \
- --enable-linux-input \
- --enable-zlib \
- --enable-freetype \
- --enable-fbdev \
- --disable-sysfs \
- --disable-sdl \
- --disable-vnc \
- --disable-video4linux \
- --disable-video4linux2 \
- $(DIRECTFB_TESTS)
-
-DIRECTFB_DEPENDENCIES = $(DIRECTFB_DEP) freetype $(DIRECTFB_FUSION)
-
HOST_DIRECTFB_DEPENDENCIES = host-pkg-config
HOST_DIRECTFB_CONF_OPT = \
--enable-shared \
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] directfb: bump version, unbreak png support
From: Peter Korsgaard @ 2010-10-06 14:44 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=f8b8a48827c6c2aa8ab610e7552a36244d3d481b
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
The recent libpng bump broke png support in directfb, as it relied
on the legacy 1.2 interface. Fix it by bumping the directfb version,
and at the same time ensure that configure finds our cross-libpng-config
rather than what the host version the user might have in the path.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
CHANGES | 6 +++---
package/directfb/directfb.mk | 3 ++-
2 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/CHANGES b/CHANGES
index c2ab972..c96bc4d 100644
--- a/CHANGES
+++ b/CHANGES
@@ -25,9 +25,9 @@
Updated/fixed packages: acpid, alsa-lib, argus, at, autoconf,
automake, avahi, axel, beecrypt, berkeleydb, bind, bmon, boa,
- bootutils, bridge-utils, bsdiff, busybox, cvs, dbus, dmraid,
- docker, dosfstools, dropbear, e2fsprogs, expat, ezxml, fbset,
- fconfig, ffmpeg, freetype, gadgetfs-test, gamin, gawk,
+ bootutils, bridge-utils, bsdiff, busybox, cvs, dbus, directfb,
+ dmraid, docker, dosfstools, dropbear, e2fsprogs, expat, ezxml,
+ fbset, fconfig, ffmpeg, freetype, gadgetfs-test, gamin, gawk,
genext2fs, gperf, gst-plugins-ugly, gtk2-themes, gtkperf,
gvfs, haserl, hdparm, hostapd, hwdata, ifplugd, imagemagick,
iperf, ipsec-tools, iproute2, iptables, iw, jpeg, kexec,
diff --git a/package/directfb/directfb.mk b/package/directfb/directfb.mk
index ccb0c5a..05d3673 100644
--- a/package/directfb/directfb.mk
+++ b/package/directfb/directfb.mk
@@ -4,7 +4,7 @@
#
#############################################################
DIRECTFB_VERSION_MAJOR:=1.4
-DIRECTFB_VERSION:=1.4.3
+DIRECTFB_VERSION:=1.4.5
DIRECTFB_SITE:=http://www.directfb.org/downloads/Core/DirectFB-$(DIRECTFB_VERSION_MAJOR)
DIRECTFB_SOURCE:=DirectFB-$(DIRECTFB_VERSION).tar.gz
DIRECTFB_AUTORECONF = NO
@@ -104,6 +104,7 @@ endif
ifeq ($(BR2_PACKAGE_DIRECTFB_PNG),y)
DIRECTFB_PNG:=--enable-png
DIRECTFB_DEP+= libpng
+DIRECTFB_CONF_ENV += ac_cv_path_LIBPNG_CONFIG=$(STAGING_DIR)/usr/bin/libpng-config
else
DIRECTFB_PNG:=--disable-png
endif
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] package: add libmpeg2
From: Thomas Petazzoni @ 2010-10-06 13:53 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20101006103554.2176D8B7C6@busybox.osuosl.org>
On Wed, 6 Oct 2010 11:48:58 +0200
Peter Korsgaard <jacmet@sunsite.dk> wrote:
> +config BR2_PACKAGE_LIBMPEG2_BINS
> + bool "mpeg2 binaries"
> + depends on BR2_PACKAGE_LIBMPEG2
> + help
> + Install mpeg2dec, corrupt_mpeg2 and extrac_mpeg2 programs as
> + well.
Tiny typos here: extracT_mpeg2 and incorrect indentation.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH 08/21] genext2fs: bump to 1.4.1
From: Peter Korsgaard @ 2010-10-06 11:39 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1284864823-18993-9-git-send-email-Martin.Banky@gmail.com>
>>>>> "Martin" == Martin Banky <martin.banky@gmail.com> writes:
Martin> Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit master 1/1] nano: bump to 2.2.5
From: Peter Korsgaard @ 2010-10-06 11:38 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=475de409fd6ea4d55321edfcac8b142b7abb95d6
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/nano/nano.mk | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/nano/nano.mk b/package/nano/nano.mk
index 47355a3..5e9824b 100644
--- a/package/nano/nano.mk
+++ b/package/nano/nano.mk
@@ -4,7 +4,7 @@
#
#############################################################
-NANO_VERSION = 2.2.3
+NANO_VERSION = 2.2.5
NANO_SITE = http://www.nano-editor.org/dist/v2.2
NANO_MAKE_ENV = CURSES_LIB="-lncurses"
NANO_CONF_OPT = --without-slang --enable-tiny
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] genext2fs: bump to 1.4.1
From: Peter Korsgaard @ 2010-10-06 11:38 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=285b8fe9047e64e0c63239d2b0b8c667936ca176
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
CHANGES | 35 ++++++++++---------
...squash.patch => genext2fs-1.4.1-nosquash.patch} | 0
... => genext2fs-1.4.1-remove_ugly_warnings.patch} | 0
package/genext2fs/genext2fs.mk | 2 +-
4 files changed, 19 insertions(+), 18 deletions(-)
rename package/genext2fs/{genext2fs-1.4-nosquash.patch => genext2fs-1.4.1-nosquash.patch} (100%)
rename package/genext2fs/{genext2fs-1.4-remove_ugly_warnings.patch => genext2fs-1.4.1-remove_ugly_warnings.patch} (100%)
diff --git a/CHANGES b/CHANGES
index 1f80097..c2ab972 100644
--- a/CHANGES
+++ b/CHANGES
@@ -27,23 +27,24 @@
automake, avahi, axel, beecrypt, berkeleydb, bind, bmon, boa,
bootutils, bridge-utils, bsdiff, busybox, cvs, dbus, dmraid,
docker, dosfstools, dropbear, e2fsprogs, expat, ezxml, fbset,
- fconfig, ffmpeg, freetype, gadgetfs-test, gamin, gawk, gperf,
- gst-plugins-ugly, gtk2-themes, gtkperf, gvfs, haserl, hdparm,
- hostapd, hwdata, ifplugd, imagemagick, iperf, ipsec-tools,
- iproute2, iptables, iw, jpeg, kexec, kismet, less, libcgi,
- libcurl, libdaemon, libdnet, liberation, libevent, libeXosip2,
- libglade, libgtk2, libiconv, libidn, libintl, libmms, libnl,
- liboil, libosip2, libpcap, libpng, libtool, libungif, libxml2,
- libxslt, lighttpd, lite, lm-sensors, lockfile-progs,
- logrotate, m4, mdadm, mesa3d, metacity, mtd-utils,
- mysql_client, nano, nbd, ncftp, neon, netperf, netsnmp,
- ng-spice-rework, ntfsprogs, ntp, openntpd, openssh, openvpn,
- oprofile, pango, patch, pcre, php, pkg-config, prboom, radvd,
- rdesktop, ruby, qt, quagga, samba, sawman, sdl_mixer,
- sdl_sound, setserial, shared-mime-info, speex, sqlite,
- squashfs, strace, sylpheed, taglib, tcpdump, thttpd, tiff,
- tn5250, udev, udpcast, usbmount, usbutils, vsftpd, vtun,
- which, wpa_supplicant, xapp_twm, xapp_xbacklight,
+ fconfig, ffmpeg, freetype, gadgetfs-test, gamin, gawk,
+ genext2fs, gperf, gst-plugins-ugly, gtk2-themes, gtkperf,
+ gvfs, haserl, hdparm, hostapd, hwdata, ifplugd, imagemagick,
+ iperf, ipsec-tools, iproute2, iptables, iw, jpeg, kexec,
+ kismet, less, libcgi, libcurl, libdaemon, libdnet, liberation,
+ libevent, libeXosip2, libglade, libgtk2, libiconv, libidn,
+ libintl, libmms, libnl, liboil, libosip2, libpcap, libpng,
+ libtool, libungif, libxml2, libxslt, lighttpd, lite,
+ lm-sensors, lockfile-progs, logrotate, m4, mdadm, mesa3d,
+ metacity, mtd-utils, mysql_client, nano, nbd, ncftp, neon,
+ netperf, netsnmp, ng-spice-rework, ntfsprogs, ntp, openntpd,
+ openssh, openvpn, oprofile, pango, patch, pcre, php,
+ pkg-config, prboom, radvd, rdesktop, ruby, qt, quagga, samba,
+ sawman, sdl_mixer, sdl_sound, setserial, shared-mime-info,
+ speex, sqlite, squashfs, strace, sylpheed, taglib, tcpdump,
+ thttpd, tiff, tn5250, udev, udpcast, usbmount, usbutils,
+ vsftpd, vtun, which, wpa_supplicant, xapp_twm,
+ xapp_xbacklight,
xdriver_xf86-input-{acecad,aiptek,evdev,joystick,keyboard},
xdriver-xf86-input-{mouse,synaptics,vmmouse,void},
xdriver-xf86-video-{apm,ark,ast,ati,chips,cirrus,dummy,fbdev},
diff --git a/package/genext2fs/genext2fs-1.4-nosquash.patch b/package/genext2fs/genext2fs-1.4.1-nosquash.patch
similarity index 100%
rename from package/genext2fs/genext2fs-1.4-nosquash.patch
rename to package/genext2fs/genext2fs-1.4.1-nosquash.patch
diff --git a/package/genext2fs/genext2fs-1.4-remove_ugly_warnings.patch b/package/genext2fs/genext2fs-1.4.1-remove_ugly_warnings.patch
similarity index 100%
rename from package/genext2fs/genext2fs-1.4-remove_ugly_warnings.patch
rename to package/genext2fs/genext2fs-1.4.1-remove_ugly_warnings.patch
diff --git a/package/genext2fs/genext2fs.mk b/package/genext2fs/genext2fs.mk
index 8c4981e..b4a8e70 100644
--- a/package/genext2fs/genext2fs.mk
+++ b/package/genext2fs/genext2fs.mk
@@ -4,7 +4,7 @@
#
#############################################################
-GENEXT2FS_VERSION=1.4
+GENEXT2FS_VERSION=1.4.1
GENEXT2FS_SOURCE=genext2fs-$(GENEXT2FS_VERSION).tar.gz
GENEXT2FS_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/genext2fs
--
1.7.1
^ permalink raw reply related
* [Buildroot] [PATCH 17/21] nano: bump to 2.2.5
From: Peter Korsgaard @ 2010-10-06 11:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1284864823-18993-18-git-send-email-Martin.Banky@gmail.com>
>>>>> "Martin" == Martin Banky <martin.banky@gmail.com> writes:
Martin> Signed-off-by: Martin Banky <Martin.Banky@gmail.com>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [Bug 2665] tslib examples doesn't support 24-bit display
From: bugzilla at busybox.net @ 2010-10-06 11:19 UTC (permalink / raw)
To: buildroot
In-Reply-To: <bug-2665-163@https.bugs.busybox.net/>
https://bugs.busybox.net/show_bug.cgi?id=2665
tajen_junk at hotmail.com changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply
* [Buildroot] [Bug 2665] tslib examples doesn't support 24-bit display
From: bugzilla at busybox.net @ 2010-10-06 11:19 UTC (permalink / raw)
To: buildroot
In-Reply-To: <bug-2665-163@https.bugs.busybox.net/>
https://bugs.busybox.net/show_bug.cgi?id=2665
--- Comment #1 from tajen_junk at hotmail.com ---
Created attachment 2563
--> https://bugs.busybox.net/attachment.cgi?id=2563
Drop in buildroot-x.x/package/tslib/
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply
* [Buildroot] [Bug 2665] New: tslib examples doesn't support 24-bit display
From: bugzilla at busybox.net @ 2010-10-06 11:16 UTC (permalink / raw)
To: buildroot
https://bugs.busybox.net/show_bug.cgi?id=2665
Summary: tslib examples doesn't support 24-bit display
Product: buildroot
Version: unspecified
Platform: PC
OS/Version: Linux
Status: NEW
Severity: enhancement
Priority: P5
Component: Other
AssignedTo: unassigned at buildroot.uclibc.org
ReportedBy: tajen_junk at hotmail.com
CC: buildroot at uclibc.org
Estimated Hours: 0.0
Just a bit annoying.
I've also fixed it - patch attached
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply
* [Buildroot] libpam inclusion
From: Yegor Yefremov @ 2010-10-06 10:45 UTC (permalink / raw)
To: buildroot
There are some packages depending on libpam: sudo, busybox (PAM
support). Should it be included in staging and target or are there any
problems with including this lib into buildroot?
Regards,
Yegor
^ permalink raw reply
* [Buildroot] [git commit master 1/1] package: add libmpeg2
From: Peter Korsgaard @ 2010-10-06 9:48 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=d089c987a67359f1f1b697d0b6bb60e95be2ba62
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
libmpeg2 is a mpeg1/mpeg2 video decoder library.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
CHANGES | 2 +-
package/multimedia/Config.in | 1 +
package/multimedia/libmpeg2/Config.in | 13 +++++++++++++
package/multimedia/libmpeg2/libmpeg2.mk | 28 ++++++++++++++++++++++++++++
4 files changed, 43 insertions(+), 1 deletions(-)
create mode 100644 package/multimedia/libmpeg2/Config.in
create mode 100644 package/multimedia/libmpeg2/libmpeg2.mk
diff --git a/CHANGES b/CHANGES
index c979607..a8bd699 100644
--- a/CHANGES
+++ b/CHANGES
@@ -21,7 +21,7 @@
Alpha, Cris, IA64 and Sparc64 architecture support removed.
- New packages: librsvg, xz
+ New packages: libmpeg2, librsvg, xz
Updated/fixed packages: acpid, alsa-lib, argus, at, autoconf,
automake, avahi, axel, beecrypt, berkeleydb, bind, bmon, boa,
diff --git a/package/multimedia/Config.in b/package/multimedia/Config.in
index 3b0eec5..91def57 100644
--- a/package/multimedia/Config.in
+++ b/package/multimedia/Config.in
@@ -16,6 +16,7 @@ source "package/multimedia/libid3tag/Config.in"
source "package/multimedia/libmad/Config.in"
source "package/multimedia/libmms/Config.in"
source "package/multimedia/libmpd/Config.in"
+source "package/multimedia/libmpeg2/Config.in"
source "package/multimedia/libogg/Config.in"
source "package/multimedia/libsndfile/Config.in"
source "package/multimedia/libtheora/Config.in"
diff --git a/package/multimedia/libmpeg2/Config.in b/package/multimedia/libmpeg2/Config.in
new file mode 100644
index 0000000..a3fafb0
--- /dev/null
+++ b/package/multimedia/libmpeg2/Config.in
@@ -0,0 +1,13 @@
+config BR2_PACKAGE_LIBMPEG2
+ bool "libmpeg2"
+ help
+ MPEG1/MPEG2 video decoder library
+
+ http://libmpeg2.sourceforge.net/
+
+config BR2_PACKAGE_LIBMPEG2_BINS
+ bool "mpeg2 binaries"
+ depends on BR2_PACKAGE_LIBMPEG2
+ help
+ Install mpeg2dec, corrupt_mpeg2 and extrac_mpeg2 programs as
+ well.
diff --git a/package/multimedia/libmpeg2/libmpeg2.mk b/package/multimedia/libmpeg2/libmpeg2.mk
new file mode 100644
index 0000000..cd8ac89
--- /dev/null
+++ b/package/multimedia/libmpeg2/libmpeg2.mk
@@ -0,0 +1,28 @@
+#############################################################
+#
+# libmpeg2
+#
+#############################################################
+LIBMPEG2_VERSION = 0.5.1
+LIBMPEG2_SOURCE = libmpeg2-$(LIBMPEG2_VERSION).tar.gz
+LIBMPEG2_SITE = http://libmpeg2.sourceforge.net/files/
+LIBMPEG2_INSTALL_STAGING = YES
+LIBMPEG2_CONF_OPT = --without-x --disable-directx
+
+ifeq ($(BR2_PACKAGE_SDL),y)
+LIBMPEG2_CONF_OPT += --enable-sdl
+LIBMPEG2_DEPENDENCIES += sdl
+else
+LIBMPEG2_CONF_OPT += --disable-sdl
+endif
+
+ifneq ($(BR2_PACKAGE_LIBMPEG2_BINS),y)
+define LIBMPEG2_REMOVE_BINS
+ rm -f $(addprefix $(TARGET_DIR)/usr/bin/,\
+ mpeg2dec corrupt_mpeg2 extract_mpeg2)
+endef
+
+LIBMPEG2_POST_INSTALL_TARGET_HOOKS += LIBMPEG2_REMOVE_BINS
+endif
+
+$(eval $(call AUTOTARGETS,package/multimedia,libmpeg2))
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] gst-plugins-ugle: add option for mpeg2dec support
From: Peter Korsgaard @ 2010-10-06 9:48 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=3506706dad5234a33d862bdc7baac6a732d1b466
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
CHANGES | 32 ++++++++++----------
package/multimedia/gst-plugins-ugly/Config.in | 4 ++
.../gst-plugins-ugly/gst-plugins-ugly.mk | 7 ++++
3 files changed, 27 insertions(+), 16 deletions(-)
diff --git a/CHANGES b/CHANGES
index a8bd699..1f80097 100644
--- a/CHANGES
+++ b/CHANGES
@@ -28,22 +28,22 @@
bootutils, bridge-utils, bsdiff, busybox, cvs, dbus, dmraid,
docker, dosfstools, dropbear, e2fsprogs, expat, ezxml, fbset,
fconfig, ffmpeg, freetype, gadgetfs-test, gamin, gawk, gperf,
- gtk2-themes, gtkperf, gvfs, haserl, hdparm, hostapd, hwdata,
- ifplugd, imagemagick, iperf, ipsec-tools, iproute2, iptables,
- iw, jpeg, kexec, kismet, less, libcgi, libcurl, libdaemon,
- libdnet, liberation, libevent, libeXosip2, libglade, libgtk2,
- libiconv, libidn, libintl, libmms, libnl, liboil, libosip2,
- libpcap, libpng, libtool, libungif, libxml2, libxslt,
- lighttpd, lite, lm-sensors, lockfile-progs, logrotate, m4,
- mdadm, mesa3d, metacity, mtd-utils, mysql_client, nano, nbd,
- ncftp, neon, netperf, netsnmp, ng-spice-rework, ntfsprogs,
- ntp, openntpd, openssh, openvpn, oprofile, pango, patch, pcre,
- php, pkg-config, prboom, radvd, rdesktop, ruby, qt, quagga,
- samba, sawman, sdl_mixer, sdl_sound, setserial,
- shared-mime-info, speex, sqlite, squashfs, strace, sylpheed,
- taglib, tcpdump, thttpd, tiff, tn5250, udev, udpcast,
- usbmount, usbutils, vsftpd, vtun, which, wpa_supplicant,
- xapp_twm, xapp_xbacklight,
+ gst-plugins-ugly, gtk2-themes, gtkperf, gvfs, haserl, hdparm,
+ hostapd, hwdata, ifplugd, imagemagick, iperf, ipsec-tools,
+ iproute2, iptables, iw, jpeg, kexec, kismet, less, libcgi,
+ libcurl, libdaemon, libdnet, liberation, libevent, libeXosip2,
+ libglade, libgtk2, libiconv, libidn, libintl, libmms, libnl,
+ liboil, libosip2, libpcap, libpng, libtool, libungif, libxml2,
+ libxslt, lighttpd, lite, lm-sensors, lockfile-progs,
+ logrotate, m4, mdadm, mesa3d, metacity, mtd-utils,
+ mysql_client, nano, nbd, ncftp, neon, netperf, netsnmp,
+ ng-spice-rework, ntfsprogs, ntp, openntpd, openssh, openvpn,
+ oprofile, pango, patch, pcre, php, pkg-config, prboom, radvd,
+ rdesktop, ruby, qt, quagga, samba, sawman, sdl_mixer,
+ sdl_sound, setserial, shared-mime-info, speex, sqlite,
+ squashfs, strace, sylpheed, taglib, tcpdump, thttpd, tiff,
+ tn5250, udev, udpcast, usbmount, usbutils, vsftpd, vtun,
+ which, wpa_supplicant, xapp_twm, xapp_xbacklight,
xdriver_xf86-input-{acecad,aiptek,evdev,joystick,keyboard},
xdriver-xf86-input-{mouse,synaptics,vmmouse,void},
xdriver-xf86-video-{apm,ark,ast,ati,chips,cirrus,dummy,fbdev},
diff --git a/package/multimedia/gst-plugins-ugly/Config.in b/package/multimedia/gst-plugins-ugly/Config.in
index 190c4d8..9f738cf 100644
--- a/package/multimedia/gst-plugins-ugly/Config.in
+++ b/package/multimedia/gst-plugins-ugly/Config.in
@@ -47,4 +47,8 @@ config BR2_PACKAGE_GST_PLUGINS_UGLY_PLUGIN_MAD
select BR2_PACKAGE_GST_PLUGINS_UGLY_PLUGIN_ID3TAG
select BR2_PACKAGE_LIBMAD
+config BR2_PACKAGE_GST_PLUGINS_UGLY_PLUGIN_MPEG2DEC
+ bool "mpeg2dec"
+ select BR2_PACKAGE_LIBMPEG2
+
endif
diff --git a/package/multimedia/gst-plugins-ugly/gst-plugins-ugly.mk b/package/multimedia/gst-plugins-ugly/gst-plugins-ugly.mk
index c87451f..fc2fcff 100644
--- a/package/multimedia/gst-plugins-ugly/gst-plugins-ugly.mk
+++ b/package/multimedia/gst-plugins-ugly/gst-plugins-ugly.mk
@@ -75,4 +75,11 @@ else
GST_PLUGINS_UGLY_CONF_OPT += --disable-mad
endif
+ifeq ($(BR2_PACKAGE_GST_PLUGINS_UGLY_PLUGIN_MPEG2DEC),y)
+GST_PLUGINS_UGLY_CONF_OPT += --enable-mpeg2dec
+GST_PLUGINS_UGLY_DEPENDENCIES += libmpeg2
+else
+GST_PLUGINS_UGLY_CONF_OPT += --disable-mpeg2dec
+endif
+
$(eval $(call AUTOTARGETS,package/multimedia,gst-plugins-ugly))
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] imagemagick: fix s/IMAGEMAGISK/IMAGEMAGICK/ typo
From: Peter Korsgaard @ 2010-10-06 9:48 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=259a129e81184b9d5f0fd998a940c7b4943fde81
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/imagemagick/imagemagick.mk | 14 +++++++-------
1 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/package/imagemagick/imagemagick.mk b/package/imagemagick/imagemagick.mk
index f14adb9..30158e0 100644
--- a/package/imagemagick/imagemagick.mk
+++ b/package/imagemagick/imagemagick.mk
@@ -33,49 +33,49 @@ ifeq ($(BR2_PACKAGE_FONTCONFIG),y)
IMAGEMAGICK_CONF_OPT += --with-fontconfig
IMAGEMAGICK_DEPENDENCIES += fontconfig
else
-IMAGEMAGISK_CONF_OPT += --without-fontconfig
+IMAGEMAGICK_CONF_OPT += --without-fontconfig
endif
ifeq ($(BR2_PACKAGE_FREETYPE),y)
IMAGEMAGICK_CONF_OPT += --with-freetype
IMAGEMAGICK_DEPENDENCIES += freetype
else
-IMAGEMAGISK_CONF_OPT += --without-freetype
+IMAGEMAGICK_CONF_OPT += --without-freetype
endif
ifeq ($(BR2_PACKAGE_JPEG),y)
IMAGEMAGICK_CONF_OPT += --with-jpeg
IMAGEMAGICK_DEPENDENCIES += jpeg
else
-IMAGEMAGISK_CONF_OPT += --without-jpeg
+IMAGEMAGICK_CONF_OPT += --without-jpeg
endif
ifeq ($(BR2_PACKAGE_LIBPNG),y)
IMAGEMAGICK_CONF_OPT += --with-png
IMAGEMAGICK_DEPENDENCIES += libpng
else
-IMAGEMAGISK_CONF_OPT += --without-png
+IMAGEMAGICK_CONF_OPT += --without-png
endif
ifeq ($(BR2_PACKAGE_LIBRSVG),y)
IMAGEMAGICK_CONF_OPT += --with-rsvg
IMAGEMAGICK_DEPENDENCIES += librsvg
else
-IMAGEMAGISK_CONF_OPT += --without-rsvg
+IMAGEMAGICK_CONF_OPT += --without-rsvg
endif
ifeq ($(BR2_PACKAGE_LIBXML2),y)
IMAGEMAGICK_CONF_OPT += --with-xml
IMAGEMAGICK_DEPENDENCIES += libxml2
else
-IMAGEMAGISK_CONF_OPT += --without-xml
+IMAGEMAGICK_CONF_OPT += --without-xml
endif
ifeq ($(BR2_PACKAGE_TIFF),y)
IMAGEMAGICK_CONF_OPT += --with-tiff
IMAGEMAGICK_DEPENDENCIES += tiff
else
-IMAGEMAGISK_CONF_OPT += --without-tiff
+IMAGEMAGICK_CONF_OPT += --without-tiff
endif
$(eval $(call AUTOTARGETS,package,imagemagick))
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] xapp_xbacklight: needs libXrandr/Xrender
From: Peter Korsgaard @ 2010-10-06 8:18 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=73a1f4ba5f53f69173c7e63ae07bb3d5984c68d9
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
CHANGES | 2 +-
package/x11r7/xapp_xbacklight/Config.in | 2 ++
package/x11r7/xapp_xbacklight/xapp_xbacklight.mk | 2 +-
3 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/CHANGES b/CHANGES
index 2fc43b0..c979607 100644
--- a/CHANGES
+++ b/CHANGES
@@ -43,7 +43,7 @@
shared-mime-info, speex, sqlite, squashfs, strace, sylpheed,
taglib, tcpdump, thttpd, tiff, tn5250, udev, udpcast,
usbmount, usbutils, vsftpd, vtun, which, wpa_supplicant,
- xapp_twm,
+ xapp_twm, xapp_xbacklight,
xdriver_xf86-input-{acecad,aiptek,evdev,joystick,keyboard},
xdriver-xf86-input-{mouse,synaptics,vmmouse,void},
xdriver-xf86-video-{apm,ark,ast,ati,chips,cirrus,dummy,fbdev},
diff --git a/package/x11r7/xapp_xbacklight/Config.in b/package/x11r7/xapp_xbacklight/Config.in
index 3d727e2..9756235 100644
--- a/package/x11r7/xapp_xbacklight/Config.in
+++ b/package/x11r7/xapp_xbacklight/Config.in
@@ -1,5 +1,7 @@
config BR2_PACKAGE_XAPP_XBACKLIGHT
bool "xbacklight"
select BR2_PACKAGE_XLIB_LIBX11
+ select BR2_PACKAGE_XLIB_LIBXRANDR
+ select BR2_PACKAGE_XLIB_LIBXRENDER
help
xbacklight
diff --git a/package/x11r7/xapp_xbacklight/xapp_xbacklight.mk b/package/x11r7/xapp_xbacklight/xapp_xbacklight.mk
index 03f62b1..9da0c65 100644
--- a/package/x11r7/xapp_xbacklight/xapp_xbacklight.mk
+++ b/package/x11r7/xapp_xbacklight/xapp_xbacklight.mk
@@ -8,6 +8,6 @@ XAPP_XBACKLIGHT_VERSION = 1.1.1
XAPP_XBACKLIGHT_SOURCE = xbacklight-$(XAPP_XBACKLIGHT_VERSION).tar.bz2
XAPP_XBACKLIGHT_SITE = http://xorg.freedesktop.org/releases/individual/app
XAPP_XBACKLIGHT_AUTORECONF = NO
-XAPP_XBACKLIGHT_DEPENDENCIES = xlib_libX11
+XAPP_XBACKLIGHT_DEPENDENCIES = xlib_libX11 xlib_libXrandr xlib_libXrender
$(eval $(call AUTOTARGETS,package/x11r7,xapp_xbacklight))
--
1.7.1
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] xapp_twm: needs libX11/Xext/Xt/Xmu
From: Peter Korsgaard @ 2010-10-06 8:04 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=a82675239c4125340938299aa729d4d83558ad72
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
CHANGES | 1 +
package/x11r7/xapp_twm/Config.in | 4 ++++
package/x11r7/xapp_twm/xapp_twm.mk | 1 +
3 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/CHANGES b/CHANGES
index d93e9e1..2fc43b0 100644
--- a/CHANGES
+++ b/CHANGES
@@ -43,6 +43,7 @@
shared-mime-info, speex, sqlite, squashfs, strace, sylpheed,
taglib, tcpdump, thttpd, tiff, tn5250, udev, udpcast,
usbmount, usbutils, vsftpd, vtun, which, wpa_supplicant,
+ xapp_twm,
xdriver_xf86-input-{acecad,aiptek,evdev,joystick,keyboard},
xdriver-xf86-input-{mouse,synaptics,vmmouse,void},
xdriver-xf86-video-{apm,ark,ast,ati,chips,cirrus,dummy,fbdev},
diff --git a/package/x11r7/xapp_twm/Config.in b/package/x11r7/xapp_twm/Config.in
index 77f8554..25bf800 100644
--- a/package/x11r7/xapp_twm/Config.in
+++ b/package/x11r7/xapp_twm/Config.in
@@ -1,4 +1,8 @@
config BR2_PACKAGE_XAPP_TWM
bool "twm"
+ select BR2_PACKAGE_XLIB_LIBX11
+ select BR2_PACKAGE_XLIB_LIBXEXT
+ select BR2_PACKAGE_XLIB_LIBXT
+ select BR2_PACKAGE_XLIB_LIBXMU
help
No description available
diff --git a/package/x11r7/xapp_twm/xapp_twm.mk b/package/x11r7/xapp_twm/xapp_twm.mk
index 28fc225..bc35293 100644
--- a/package/x11r7/xapp_twm/xapp_twm.mk
+++ b/package/x11r7/xapp_twm/xapp_twm.mk
@@ -8,5 +8,6 @@ XAPP_TWM_VERSION = 1.0.3
XAPP_TWM_SOURCE = twm-$(XAPP_TWM_VERSION).tar.bz2
XAPP_TWM_SITE = http://xorg.freedesktop.org/releases/individual/app
XAPP_TWM_AUTORECONF = NO
+XAPP_TWM_DEPENDENCIES = xlib_libX11 xlib_libXext xlib_libXt xlib_libXmu
$(eval $(call AUTOTARGETS,package/x11r7,xapp_twm))
--
1.7.1
^ permalink raw reply related
* [Buildroot] [PATCH] pcmciautils: added package
From: Patrik Dahlström @ 2010-10-06 7:45 UTC (permalink / raw)
To: buildroot
Subject: [PATCH] pcmciautils: added package
Date: Wednesday 06 October 2010, 09:41:18
From: "Patrik Dahlstr?m" <risca88@gmail.com>
To: buildroot at busybox.net
CC: Patrik Dahlstr?m <patrikd@telia.com>
---
package/Config.in | 1 +
package/pcmciautils/Config.in | 24 +++++++++++++++++++++
package/pcmciautils/pcmciautils.mk | 41
++++++++++++++++++++++++++++++++++++
3 files changed, 66 insertions(+), 0 deletions(-)
create mode 100644 package/pcmciautils/Config.in
create mode 100644 package/pcmciautils/pcmciautils.mk
diff --git a/package/Config.in b/package/Config.in
index 5e08d59..c75932b 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -177,6 +177,7 @@ source "package/mtd/Config.in"
source "package/ntfs-3g/Config.in"
source "package/ntfsprogs/Config.in"
source "package/pciutils/Config.in"
+source "package/pcmciautils/Config.in"
source "package/setserial/Config.in"
if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS
# busybox has fdisk
diff --git a/package/pcmciautils/Config.in b/package/pcmciautils/Config.in
new file mode 100644
index 0000000..022558a
--- /dev/null
+++ b/package/pcmciautils/Config.in
@@ -0,0 +1,24 @@
+config BR2_PACKAGE_PCMCIAUTILS
+ bool "pcmciautils"
+ select BR2_PACKAGE_LIBSYSFS
+ depends on BR2_PACKAGE_UDEV
+ help
+ Set of tools needed to use PC-card slots usually found in laptops
+
+comment "pcmciautils requires udev"
+ depends on !BR2_PACKAGE_UDEV
+
+if BR2_PACKAGE_PCMCIAUTILS
+
+config BR2_PACKAGE_PCMCIAUTILS_STARTUP
+ bool "Build socket-startup script"
+ default y
+ help
+ Enable this if you need the socket-startup script
+
+ You don't need it if the socket driver does not select
+ PCCARD_NONSTATIC -- that is the case for many embedded systems --
+ and for yenta_socket if the cardbus bridge is either below a
+ PCI-PCI bridge, or where the PCI bus is not equivalent to the host
+ bus (e.g. on PPC)
+endif
diff --git a/package/pcmciautils/pcmciautils.mk
b/package/pcmciautils/pcmciautils.mk
new file mode 100644
index 0000000..532b5ea
--- /dev/null
+++ b/package/pcmciautils/pcmciautils.mk
@@ -0,0 +1,41 @@
+#############################################################
+#
+# pcmciautils
+#
+#############################################################
+PCMCIAUTILS_VERSION:=017
+PCMCIAUTILS_SOURCE:=pcmciautils-$(PCMCIAUTILS_VERSION).tar.gz
+PCMCIAUTILS_SITE:=http://www.kernel.org/pub/linux/utils/kernel/pcmcia/
+PCMCIAUTILS_DEPENDENCIES = libsysfs
+
+ifeq ($(BR2_PACKAGE_PCMCIAUTILS_STARTUP),y)
+ BR2_PACKAGE_PCMCIAUTILS_BUILD_STARTUP=true
+else
+ BR2_PACKAGE_PCMCIAUTILS_BUILD_STARTUP=false
+endif
+
+ifeq ($(BR2_PREFER_STATIC),y)
+ BR2_PACKAGE_PCMCIAUTILS_BUILD_STATIC=true
+else
+ BR2_PACKAGE_PCMCIAUTILS_BUILD_STATIC=false
+endif
+
+define PCMCIAUTILS_BUILD_CMDS
+ $(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_CC)" -C "$(@D)" \
+ STARTUP=$(BR2_PACKAGE_PCMCIAUTILS_BUILD_STARTUP) \
+ UDEV="true" \
+ STATIC=$(BR2_PACKAGE_PCMCIAUTILS_BUILD_STATIC) \
+ DESTDIR="$(TARGET_DIR)" \
+ HOSTCC="$(HOSTCC)" \
+ V="true"
+endef
+
+define PCMCIAUTILS_INSTALL_TARGET_CMDS
+ $(MAKE) CC="$(TARGET_CC)" LD="$(TARGET_CC)" -C "$(@D)" \
+ DESTDIR="$(TARGET_DIR)" \
+ INSTALL="$(INSTALL)" \
+ INSTALL_PROGRAM="$(INSTALL)" \
+ install
+endef
+
+$(eval $(call GENTARGETS,package,pcmciautils))
--
1.7.3.1
Hi!
my current mail-provided doesn't play nice with git send-email so I had to
send using a different mail and then forward with the mail registered to
buildroot mailing list. Sorry for the delay, this patch have been done for a
week now.
MvH
Patrik Dahlstr?m
Ordf?rande - http://www.studentfiket.com/
Penga-Mas (Kass?r) - Dalarnas Nation
"Alla djur, utom m?nniskan, vet att livets huvudsakliga mening ?r att njuta av
det! --Samuel Butler
^ permalink raw reply related
* [Buildroot] [git commit master 1/1] dropbear: really fix xauth tweak since dbcec2b2
From: Peter Korsgaard @ 2010-10-06 7:45 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=36a5ccd0235c22491158634cef40cbdac278c53c
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Commit d5576fd2 tried to fix this, but introduced a new typo.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/dropbear/dropbear.mk | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/dropbear/dropbear.mk b/package/dropbear/dropbear.mk
index 0457935..b07cb63 100644
--- a/package/dropbear/dropbear.mk
+++ b/package/dropbear/dropbear.mk
@@ -21,7 +21,7 @@ define DROPBEAR_FIX_XAUTH
$(SED) 's,^#define XAUTH_COMMAND.*/xauth,#define XAUTH_COMMAND "/usr/bin/xauth,g' $(@D)/options.h
endef
-DROPBEAR_POST_EXTRACT_HOOKS += DROPBEAR_FIX_AUTH
+DROPBEAR_POST_EXTRACT_HOOKS += DROPBEAR_FIX_XAUTH
define DROPBEAR_DISABLE_REVERSE_DNS
$(SED) 's,^#define DO_HOST_LOOKUP.*,/* #define DO_HOST_LOOKUP */,' $(@D)/options.h
--
1.7.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox