Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Brandon Maier via buildroot <buildroot@buildroot.org>
To: "Neal Frager" <neal.frager@amd.com>, <buildroot@buildroot.org>
Cc: michal.simek@amd.com, romain.naour@smile.fr,
	luca.ceresoli@bootlin.com, yann.morin.1998@free.fr,
	thomas.petazzoni@bootlin.com
Subject: Re: [Buildroot] [PATCH v2 1/1] board/xilinx: bump to linux 6.6.40
Date: Thu, 08 Aug 2024 19:44:27 +0000	[thread overview]
Message-ID: <D3ASDF13YKH7.1L058LU6Z9LD5@collins.com> (raw)
In-Reply-To: <20240808132318.2473585-1-neal.frager@amd.com>

Hi Neal,

On Thu Aug 8, 2024 at 1:23 PM UTC, Neal Frager via buildroot wrote:
> This patch bumps all Xilinx board defconfigs to Linux 6.6.40.
>
> Xilinx Evaluation Boards:
> configs/versal_vck190_defconfig
> configs/versal_vpk180_defconfig
> configs/zynq_microzed_defconfig
> configs/zynq_zc702_defconfig
> configs/zynq_zc706_defconfig
> configs/zynq_zed_defconfig
> configs/zynqmp_kria_kd240_defconfig
> configs/zynqmp_kria_kr260_defconfig
> configs/zynqmp_kria_kv260_defconfig
> configs/zynqmp_zcu102_defconfig
> configs/zynqmp_zcu104_defconfig
> configs/zynqmp_zcu106_defconfig

I attempted to boot this patch on a zcu106, but I get no output over the
uart port from anything, U-Boot SPL, ATF, etc. So this board may be
broken on master.

Can you verify if it works on your end?

Thanks,
Brandon Maier

>
> Signed-off-by: Neal Frager <neal.frager@amd.com>
> ---
> V1->V2:
> - Squashed bump of all Xilinx board defconfigs to single patch
> - Removed linux patch which is no longer necessary
> ---
>  board/xilinx/patches/linux/linux.hash | 1 +
>  configs/versal_vck190_defconfig       | 2 +-
>  configs/versal_vpk180_defconfig       | 2 +-
>  configs/zynq_microzed_defconfig       | 2 +-
>  configs/zynq_zc702_defconfig          | 2 +-
>  configs/zynq_zc706_defconfig          | 2 +-
>  configs/zynq_zed_defconfig            | 2 +-
>  configs/zynqmp_kria_kd240_defconfig   | 2 +-
>  configs/zynqmp_kria_kr260_defconfig   | 2 +-
>  configs/zynqmp_kria_kv260_defconfig   | 2 +-
>  configs/zynqmp_zcu102_defconfig       | 2 +-
>  configs/zynqmp_zcu104_defconfig       | 2 +-
>  configs/zynqmp_zcu106_defconfig       | 2 +-
>  13 files changed, 13 insertions(+), 12 deletions(-)
>
> diff --git a/board/xilinx/patches/linux/linux.hash b/board/xilinx/patches/linux/linux.hash
> index d85f773478..11f4dca651 100644
> --- a/board/xilinx/patches/linux/linux.hash
> +++ b/board/xilinx/patches/linux/linux.hash
> @@ -1,2 +1,3 @@
>  # Locally calculated
>  sha256  ea85988e66b9a2e19ccd76d0f5f5e657988a873fed292160917712f45605a805  xlnx_rebase_v6.6_LTS_2024.1.tar.gz
> +sha256  6415cfcfd74e943d6ae44f6c1edcae09bf6cd89410b03c4290bf1464a8368f84  xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz
> diff --git a/configs/versal_vck190_defconfig b/configs/versal_vck190_defconfig
> index 21dfe2577a..58479c9f2d 100644
> --- a/configs/versal_vck190_defconfig
> +++ b/configs/versal_vck190_defconfig
> @@ -6,7 +6,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vck190-rev1.1"
> diff --git a/configs/versal_vpk180_defconfig b/configs/versal_vpk180_defconfig
> index 253a6d2cff..4d3afc0e98 100644
> --- a/configs/versal_vpk180_defconfig
> +++ b/configs/versal_vpk180_defconfig
> @@ -6,7 +6,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/versal/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyAMA0,115200 mmcblk0p2"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/versal-vpk180-revA"
> diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig
> index f955a0c4ad..71a5d880b3 100644
> --- a/configs/zynq_microzed_defconfig
> +++ b/configs/zynq_microzed_defconfig
> @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh"
>  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
>  BR2_LINUX_KERNEL_UIMAGE=y
>  BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
> diff --git a/configs/zynq_zc702_defconfig b/configs/zynq_zc702_defconfig
> index 75ebc2a3ba..f3fc32145b 100644
> --- a/configs/zynq_zc702_defconfig
> +++ b/configs/zynq_zc702_defconfig
> @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh"
>  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
>  BR2_LINUX_KERNEL_UIMAGE=y
>  BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
> diff --git a/configs/zynq_zc706_defconfig b/configs/zynq_zc706_defconfig
> index ce539eefaf..f1c9bd6622 100644
> --- a/configs/zynq_zc706_defconfig
> +++ b/configs/zynq_zc706_defconfig
> @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh"
>  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
>  BR2_LINUX_KERNEL_UIMAGE=y
>  BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
> diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig
> index 925faeac8e..cada3bbd47 100644
> --- a/configs/zynq_zed_defconfig
> +++ b/configs/zynq_zed_defconfig
> @@ -9,7 +9,7 @@ BR2_ROOTFS_POST_BUILD_SCRIPT="board/zynq/post-build.sh"
>  BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynq/post-image.sh"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx_zynq"
>  BR2_LINUX_KERNEL_UIMAGE=y
>  BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
> diff --git a/configs/zynqmp_kria_kd240_defconfig b/configs/zynqmp_kria_kd240_defconfig
> index dff49b9837..262e80a145 100644
> --- a/configs/zynqmp_kria_kd240_defconfig
> +++ b/configs/zynqmp_kria_kd240_defconfig
> @@ -5,7 +5,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 sda2 ${UBOOT_DIR}"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k24-revA-sck-kd-g-revA"
> diff --git a/configs/zynqmp_kria_kr260_defconfig b/configs/zynqmp_kria_kr260_defconfig
> index 24fdea9c30..65bba693a0 100644
> --- a/configs/zynqmp_kria_kr260_defconfig
> +++ b/configs/zynqmp_kria_kr260_defconfig
> @@ -5,7 +5,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 sda2 ${UBOOT_DIR}"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k26-revA-sck-kr-g-revB"
> diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig
> index a16da66e38..22df2a4112 100644
> --- a/configs/zynqmp_kria_kv260_defconfig
> +++ b/configs/zynqmp_kria_kv260_defconfig
> @@ -5,7 +5,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS1,115200 mmcblk1p2 ${UBOOT_DIR}"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-smk-k26-revA-sck-kv-g-revB"
> diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig
> index 3f1726a13f..c2feb393de 100644
> --- a/configs/zynqmp_zcu102_defconfig
> +++ b/configs/zynqmp_zcu102_defconfig
> @@ -5,7 +5,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu102-rev1.0"
> diff --git a/configs/zynqmp_zcu104_defconfig b/configs/zynqmp_zcu104_defconfig
> index b6d943333f..c26210b49c 100644
> --- a/configs/zynqmp_zcu104_defconfig
> +++ b/configs/zynqmp_zcu104_defconfig
> @@ -5,7 +5,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu104-revC"
> diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig
> index c10ec70ed8..737a8454bb 100644
> --- a/configs/zynqmp_zcu106_defconfig
> +++ b/configs/zynqmp_zcu106_defconfig
> @@ -5,7 +5,7 @@ BR2_ROOTFS_POST_IMAGE_SCRIPT="board/zynqmp/post-image.sh"
>  BR2_ROOTFS_POST_SCRIPT_ARGS="ttyPS0,115200 mmcblk0p2"
>  BR2_LINUX_KERNEL=y
>  BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> -BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_2024.1)/xlnx_rebase_v6.6_LTS_2024.1.tar.gz"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,Xilinx,linux-xlnx,xlnx_rebase_v6.6_LTS_merge_6.6.40)/xlnx_rebase_v6.6_LTS_merge_6.6.40.tar.gz"
>  BR2_LINUX_KERNEL_DEFCONFIG="xilinx"
>  BR2_LINUX_KERNEL_DTS_SUPPORT=y
>  BR2_LINUX_KERNEL_INTREE_DTS_NAME="xilinx/zynqmp-zcu106-revA"
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2024-08-08 19:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-08 13:23 [Buildroot] [PATCH v2 1/1] board/xilinx: bump to linux 6.6.40 Neal Frager via buildroot
2024-08-08 19:44 ` Brandon Maier via buildroot [this message]
2024-08-09  3:52   ` Frager, Neal via buildroot
2024-08-09  6:30     ` Thomas Petazzoni via buildroot
2024-08-09  6:39       ` Frager, Neal via buildroot
     [not found]         ` <3036afae-2027-4993-bb1f-acd3b312759e@amd.com>
2024-08-09  8:22           ` Frager, Neal via buildroot
2024-08-09 15:02     ` Brandon Maier via buildroot
2024-08-09 15:19       ` Frager, Neal via buildroot
2024-08-19 10:01         ` Luca Ceresoli via buildroot
2024-08-09 15:51 ` Brandon Maier via buildroot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=D3ASDF13YKH7.1L058LU6Z9LD5@collins.com \
    --to=buildroot@buildroot.org \
    --cc=brandon.maier@collins.com \
    --cc=luca.ceresoli@bootlin.com \
    --cc=michal.simek@amd.com \
    --cc=neal.frager@amd.com \
    --cc=romain.naour@smile.fr \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=yann.morin.1998@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox