[Buildroot] [PATCH 1/1] configs/freescale_imx8mpevk: new defconfig

[Gary Bisson <gary.bisson@boundarydevices.com>]

Hi Stephane,

Thanks for this, I've been looking forward 8MP support in Buildroot!

On Thu, Mar 18, 2021 at 02:01:41PM +0000, Stephane Viau (OSS) wrote:
> >This patch adds support for the NXP i.MX 8MPlus EVK board [1].                  
> >                                                                                
> >The final boot image is created from uboot and firmware binaries in post        
> >image script board/freescale/common/imx/imx8-bootloader-prepare.sh              
> >                                                                                
> >This first support is based on NXP's 5.4.70_2.3.0 BSP.                          
> >                                                                                
> >[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-plus-applications-processor:8MPLUSLPD4-EVK
> >                                                                                
> >Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>                        
> >---                                                                             
> 
>     [Stephane: tested on i.MX8MP EVK]
>     Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>

However, can you split your patch? It changes many files/packages which
aren't related to the NXP EVK but the i.MX 8M Plus support in general.

You can have a look at my Nano series [1] for comparison.

Regards,
Gary

[1] http://patchwork.ozlabs.org/project/buildroot/list/?series=170477&archive=both&state=*