Re: [Buildroot] [RESEND PATCH v3 1/1] configs: add raspberrypi 5 defconfig

From: "Yann E. MORIN" <yann.morin.1998@free.fr>
To: "Gaël PORTAY" <gael.portay@rtone.fr>
Cc: Adam Duskett <adam.duskett@amarulasolutions.com>,
	Martin Bark <martin@barkynet.com>,
	Julien Grossholtz <julien.grossholtz@openest.io>,
	buildroot@buildroot.org
Subject: Re: [Buildroot] [RESEND PATCH v3 1/1] configs: add raspberrypi 5 defconfig
Date: Thu, 6 Jun 2024 16:21:21 +0200	[thread overview]
Message-ID: <ZmHF4fZb6N9kZ8OR@landeda> (raw)
In-Reply-To: <20240427020431.415608-1-gael.portay@rtone.fr>

Gaël, All,

On 2024-04-27 04:04 +0200, Gaël PORTAY spake thusly:
> This configuration builds an image for the RaspberryPi 5.
> 
> Cc: Adam Duskett <adam.duskett@amarulasolutions.com>
> Cc: Yann E. MORIN <yann.morin.1998@free.fr>
> Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
> ---
[--SNIP--]
> diff --git a/configs/raspberrypi5_defconfig b/configs/raspberrypi5_defconfig
> new file mode 100644
> index 0000000000..d0760824bd
> --- /dev/null
> +++ b/configs/raspberrypi5_defconfig
> @@ -0,0 +1,47 @@
> +BR2_aarch64=y
> +BR2_cortex_a76_a55=y
> +BR2_ARM_FPU_VFPV4=y
> +
> +BR2_TOOLCHAIN_BUILDROOT_CXX=y
> +
> +BR2_SYSTEM_DHCP="eth0"
> +
> +# Linux headers same as kernel, a 6.1 series
> +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
> +
> +BR2_LINUX_KERNEL=y
> +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/raspberrypi/linux-4k-page-size.fragment"
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
> +BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
> +BR2_LINUX_KERNEL_DEFCONFIG="bcm2712"
> +
> +# Build the DTB from the kernel sources
> +BR2_LINUX_KERNEL_DTS_SUPPORT=y
> +BR2_LINUX_KERNEL_INTREE_DTS_NAME="broadcom/bcm2712-rpi-5-b"
> +
> +BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
> +
> +BR2_PACKAGE_RPI_FIRMWARE=y
> +BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi5/config_5.txt"
> +BR2_PACKAGE_RPI_FIRMWARE_CMDLINE_FILE="board/raspberrypi5/cmdline_5.txt"
> +# BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is not set
> +
> +# Required tools to create the SD image
> +BR2_PACKAGE_HOST_DOSFSTOOLS=y
> +BR2_PACKAGE_HOST_GENIMAGE=y
> +BR2_PACKAGE_HOST_MTOOLS=y
> +
> +# Filesystem / image
> +BR2_TARGET_ROOTFS_EXT2=y
> +BR2_TARGET_ROOTFS_EXT2_4=y
> +BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
> +# BR2_TARGET_ROOTFS_TAR is not set
> +BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi5/post-build.sh"
> +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi5/post-image.sh"
> +
> +# Enable compressed kernel module support
> +BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
> +BR2_PACKAGE_KMOD_TOOLS=y
> +BR2_PACKAGE_XZ=y
> +BR2_PACKAGE_KMOD=y
> +BR2_PACKAGE_HOST_KMOD_XZ=y

    $ ./utils/docker-run make check-package
    configs/raspberrypi5_defconfig:0: missing BR2_DOWNLOAD_FORCE_CHECK_HASHES

Since it uses the same versions as the other Raspberry Pi boards, I've
enabled checking hashes and used the existing hash files.

Applied to next, thanks.

Regards,
Yann E. MORIN.

-- 
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 561 099 427 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot