Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Brandon Maier via buildroot <buildroot@buildroot.org>
To: Neal Frager via buildroot <buildroot@buildroot.org>
Cc: ibai.erkiaga-elorza@amd.com, luca.ceresoli@bootlin.com,
	thomas.petazzoni@bootlin.com, Neal Frager <neal.frager@amd.com>,
	michal.simek@amd.com, yann.morin.1998@free.fr
Subject: Re: [Buildroot] [PATCH v12 3/3] configs/zynqmp*: build pmufw source
Date: Mon, 10 Jun 2024 14:44:16 +0000	[thread overview]
Message-ID: <ZmcRQPmxRccLFXnj@bspbox.kirk> (raw)
In-Reply-To: <20240607094705.1962913-3-neal.frager@amd.com>

Hi Neal,

On Fri, Jun 07, 2024 at 10:47:05AM +0100, Neal Frager via buildroot wrote:
> This patch migrates the zynqmp config files to use the new
> zynqmp-firmware package for building the zynqmp pmufw from source.
> 
> Signed-off-by: Neal Frager <neal.frager@amd.com>
> ---
> V4->V7:
>  - no changes
> V7->V8:
>  - bump to xilinx_v2023.2
> V8->V9:
>  - add the new zynqmp defconfigs
>  - add BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH definition
> V9->V10:
>  - no changes
> V10->V11:
>  - BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH is set by zynqmp-firmware
> V11->V12:
>  - BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH is set in each defconfig
> ---
>  configs/zynqmp_kria_kr260_defconfig | 6 +++++-
>  configs/zynqmp_kria_kv260_defconfig | 6 +++++-
>  configs/zynqmp_zcu102_defconfig     | 5 ++++-
>  configs/zynqmp_zcu104_defconfig     | 5 ++++-
>  configs/zynqmp_zcu106_defconfig     | 5 ++++-
>  5 files changed, 22 insertions(+), 5 deletions(-)
> 
> diff --git a/configs/zynqmp_kria_kr260_defconfig b/configs/zynqmp_kria_kr260_defconfig
> index 3bf269ab6b..3f475af882 100644
> --- a/configs/zynqmp_kria_kr260_defconfig
> +++ b/configs/zynqmp_kria_kr260_defconfig
> @@ -31,10 +31,14 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/kr260-kria/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kr260/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TARGET_ZYNQMP_FIRMWARE_CUSTOM_CFLAGS="-DK26_SOM"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_kria_kv260_defconfig b/configs/zynqmp_kria_kv260_defconfig
> index 7b402e032c..313b324a13 100644
> --- a/configs/zynqmp_kria_kv260_defconfig
> +++ b/configs/zynqmp_kria_kv260_defconfig
> @@ -31,10 +31,14 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/kv260-kria/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/kria/kv260/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TARGET_ZYNQMP_FIRMWARE_CUSTOM_CFLAGS="-DK26_SOM"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_zcu102_defconfig b/configs/zynqmp_zcu102_defconfig
> index f40002f6d9..302ad1394e 100644
> --- a/configs/zynqmp_zcu102_defconfig
> +++ b/configs/zynqmp_zcu102_defconfig
> @@ -30,10 +30,13 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/zcu102-zynqmp/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu102/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_zcu104_defconfig b/configs/zynqmp_zcu104_defconfig
> index ef9c9bad49..059858fff6 100644
> --- a/configs/zynqmp_zcu104_defconfig
> +++ b/configs/zynqmp_zcu104_defconfig
> @@ -30,10 +30,13 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/zcu104-zynqmp/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu104/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> diff --git a/configs/zynqmp_zcu106_defconfig b/configs/zynqmp_zcu106_defconfig
> index 07c595436f..39dd5c8ab3 100644
> --- a/configs/zynqmp_zcu106_defconfig
> +++ b/configs/zynqmp_zcu106_defconfig
> @@ -30,10 +30,13 @@ BR2_TARGET_UBOOT_NEEDS_GNUTLS=y
>  BR2_TARGET_UBOOT_SPL=y
>  BR2_TARGET_UBOOT_SPL_NAME="spl/boot.bin"
>  BR2_TARGET_UBOOT_ZYNQMP=y
> -BR2_TARGET_UBOOT_ZYNQMP_PMUFW="https://github.com/Xilinx/soc-prebuilt-firmware/raw/xilinx_v2024.1/zcu106-zynqmp/pmufw.elf"
>  BR2_TARGET_UBOOT_ZYNQMP_PM_CFG="board/zynqmp/zcu106/pm_cfg_obj.c"
>  BR2_TARGET_UBOOT_FORMAT_ITB=y
>  BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
> +BR2_TARGET_UBOOT_ZYNQMP_PMUFW_SOURCE=y
> +BR2_TARGET_ZYNQMP_FIRMWARE_VERSION="xilinx_v2024.1"
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT=y
> +BR2_TOOLCHAIN_BARE_METAL_BUILDROOT_ARCH="microblazeel-xilinx-elf"
>  BR2_PACKAGE_HOST_DOSFSTOOLS=y
>  BR2_PACKAGE_HOST_GENIMAGE=y
>  BR2_PACKAGE_HOST_MTOOLS=y
> -- 
> 2.25.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot
> 

Reviewed-by: Brandon Maier <brandon.maier@collins.com>

Thanks,
Brandon Maier
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2024-06-10 14:44 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-06-07  9:47 [Buildroot] [PATCH v12 1/3] boot/zynqmp-firmware: new boot firmware Neal Frager via buildroot
2024-06-07  9:47 ` [Buildroot] [PATCH v12 2/3] boot/uboot.mk: new zynqmp pmufw build option Neal Frager via buildroot
2024-06-10 14:42   ` Brandon Maier via buildroot
2024-06-07  9:47 ` [Buildroot] [PATCH v12 3/3] configs/zynqmp*: build pmufw source Neal Frager via buildroot
2024-06-10 14:44   ` Brandon Maier via buildroot [this message]
2024-06-07 10:04 ` [Buildroot] [PATCH v12 1/3] boot/zynqmp-firmware: new boot firmware Frager, Neal via buildroot
2024-06-07 11:22 ` Yann E. MORIN
2024-06-07 11:41   ` Frager, Neal via buildroot
2024-06-10 13:12 ` Brandon Maier via buildroot
2024-06-11  4:25   ` Frager, Neal via buildroot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ZmcRQPmxRccLFXnj@bspbox.kirk \
    --to=buildroot@buildroot.org \
    --cc=brandon.maier@collins.com \
    --cc=ibai.erkiaga-elorza@amd.com \
    --cc=luca.ceresoli@bootlin.com \
    --cc=michal.simek@amd.com \
    --cc=neal.frager@amd.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=yann.morin.1998@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox