Buildroot Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Petazzoni via buildroot <buildroot@buildroot.org>
To: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: buildroot@buildroot.org,
	 "Arnout Vandecappelle (Essensium/Mind)" <arnout@mind.be>,
	David Laight <David.Laight@aculab.com>
Subject: Re: [Buildroot] [PATCH v2] support/scripts/check-host-libs: add new check on host binaries/libs
Date: Tue, 25 Aug 2026 10:19:44 +0200	[thread overview]
Message-ID: <ao1Pks3_H87lajHF@windsurf> (raw)
In-Reply-To: <ao1E7m-2c4BbHUt9@landeda>

Hello,

On Tue, Aug 25, 2026 at 09:31:58AM +0200, Yann E. MORIN wrote:

> I was wondering why you would not extend check-host-rpath, see my
> tentative, totally untested patch at the end...
> 
> Also, check-host-rpath is run after each package install, so it will
> catch executables installed without their dependent libraries, should
> they later be installed.

Ah, good idea. Then maybe check-host-rpath should be renamed into
check-host-bins or something like that, because it would no longer
check just RPATH, but other aspects of host-installed bins and libs?

> > +HOST_DIR=$1
> 
> Double-quote variable expansion (shellcheck should have reported that
> one, I think).

I just passed "./utils/docker-run shellcheck" on it, maybe there's
some additional shellcheck options to pass to have stricter checks.

> There is a construct that I tend to use nowadas, which is to use
> true/false, rather than 0/1 or yes/no, because that can be reused
> without a test;
> 
>     success=true
>     for loop; do
>         if [ conditiion ]; then
>             success=false
>         fi
>     done
>     ${success}

OK, nice.

> And here's a tentative, totally untested patch to introduce that in
> check-host-rpath (indented so that patchwork does not see it):
> 
>     diff --git a/support/scripts/check-host-rpath b/support/scripts/check-host-rpath
>     index 41aa0aa1ed..e1fdf16829 100755
>     --- a/support/scripts/check-host-rpath
>     +++ b/support/scripts/check-host-rpath
>     @@ -21,6 +21,14 @@ main() {
>          while read file; do
>              is_elf "${file}" || continue
>              elf_needs_rpath "${file}" "${hostdir}" || continue
>     +        missing_libs="$(get_missing_libs "${file}" "${hostdir}")"
>     +        if [ "${missing_libs}" ]; then
>     +            ret=1
>     +            printf "***\n"
>     +            printf "*** ERROR: package %s uses libs not in HOST_DIR:\n" "${pkg}"
>     +            # shellcheck disable=SC2086 # we need the word splitting
>     +            printf '  - %s\n' ${missing_libs}
>     +        fi
>              check_elf_has_rpath "${file}" "${hostdir}" "${perpackagedir}" && continue
>              if [ ${ret} -eq 0 ]; then
>                  ret=1
>     @@ -57,16 +65,44 @@ is_elf() {
>      elf_needs_rpath() {
>          local file="${1}"
>          local hostdir="${2}"
>     +
>     +    [ -n "$(get_libs "${file}" "${hostdir}")" ]
>     +}
>     +
>     +# This function returns all non-toolchain libs tha tare not in HOST_DIR
>     +get_missing_libs() {
>     +    local file="${1}"
>     +    local hostdir="${2}"
>     +    local lib
>     +
>     +    get_libs "${file}" "${hostdir}" \
>     +    | while read lib; do
>     +        if [ -not -e "${hostdir}/lib/${lib}" ]; then
>     +            printf '%s\n' "${lib}"
>     +        fi
>     +    done
>     +}
>     +
>     +# This function returns the list of non-toolchain libraries that an ELF
>     +# file has as DT_NEEDED
>     +get_libs() {
>     +    local file="${1}"
>     +    local hostdir="${2}"
>          local lib
> 
>          while read lib; do
>     -        [ -e "${hostdir}/lib/${lib}" ] && return 0
>     +        case "${lib}" in
>     +            libc.so*|libm.so*|libstdc++.so*|libpthread.so*|libgcc_s.so*|libdl.so*|ld-*|libgomp.so*|libcrypt.so*|libcrypto.so*|libatomic.so*|librt.so*|libutil.so*|libresolv.so*)
>     +                continue
>     +                ;;
>     +            *)
>     +                printf '%s\n' "${lib}"
>     +                ;;
>     +        esac
>          done < <( readelf -d "${file}" 2>/dev/null                             \
>                    |sed -r -e '/^.* \(NEEDED\) .*Shared library: \[(.+)\]$/!d;' \
>                           -e 's//\1/;'                                          \
>                  )
>     -
>     -    return 1
>      }

OK, I'll review this and try to get back with a v3... hopefully
earlier than in 4 years!

Thanks for the prompt review and feedback!

Thomas
-- 
Thomas Petazzoni, co-owner and CEO, Bootlin
Embedded Linux and Kernel engineering and training
https://bootlin.com
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

      reply	other threads:[~2026-08-25  8:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-08-24 21:34 [Buildroot] [PATCH v2] support/scripts/check-host-libs: add new check on host binaries/libs Thomas Petazzoni via buildroot
2026-08-25  7:22 ` Alexis Lothoré via buildroot
2026-08-25  7:31 ` Yann E. MORIN via buildroot
2026-08-25  8:19   ` Thomas Petazzoni via buildroot [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=ao1Pks3_H87lajHF@windsurf \
    --to=buildroot@buildroot.org \
    --cc=David.Laight@aculab.com \
    --cc=arnout@mind.be \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=yann.morin.1998@free.fr \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox