From: bugzilla at busybox.net <bugzilla@busybox.net>
To: buildroot@busybox.net
Subject: [Buildroot] [Bug 13146] New: raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created
Date: Mon, 10 Aug 2020 19:08:47 +0000 [thread overview]
Message-ID: <bug-13146-163@https.bugs.busybox.net/> (raw)
https://bugs.busybox.net/show_bug.cgi?id=13146
Bug ID: 13146
Summary: raspberrypi3_defconfig: "Inappropriate ioctl for
device" almost at end when sdcard.img is created
Product: buildroot
Version: unspecified
Hardware: PC
OS: Linux
Status: NEW
Severity: normal
Priority: P5
Component: Other
Assignee: unassigned at buildroot.uclibc.org
Reporter: marie.maurer at mmeacs.de
CC: buildroot at uclibc.org
Target Milestone: ---
Buildroot 2020-08-rc1 (make raspberrypi3_defconfig)
All default settings, on Ubuntu 20.04 LTS
?
Creating regular file
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext2
64-bit filesystem support is not enabled. The larger fields afforded by this
feature enable full-strength checksumming. Pass -O 64bit to rectify.
Creating filesystem with 122880 1k blocks and 30720 inodes
Filesystem UUID: c2097238-7b0a-451c-b38f-efe1a3cb7ebc
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729
Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Copying files into the device: done
Writing superblocks and filesystem accounting information: done
ln -sf rootfs.ext2
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rootfs.ext4
>>> Executing post-image script board/raspberrypi3/post-image.sh
board/raspberrypi3/genimage-raspberrypi3.cfg:34: no sub-section title/index for
'config'
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "rm -rf
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp"/*"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp""
(stderr):
INFO: cmd: "cp -a "/tmp/tmp.gaxNr8y31f"
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root""
(stderr):
INFO: cmd: "find
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root'
-depth -type d -printf '%P\0' | xargs -0 -I {} touch -r
'/tmp/tmp.gaxNr8y31f/{}'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/build/genimage.tmp/root/{}'"
(stderr):
INFO: cmd: "mkdir -p
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images""
(stderr):
INFO: vfat(boot.vfat): cmd: "dd if=/dev/zero
of="/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat"
seek=33554432 count=0 bs=1 2>/dev/null" (stderr):
INFO: vfat(boot.vfat): cmd: "mkdosfs
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'"
(stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b.dtb' as
'bcm2710-rpi-3-b.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-3-b-plus.dtb' as
'bcm2710-rpi-3-b-plus.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-3-b-plus.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'bcm2710-rpi-cm3.dtb' as
'bcm2710-rpi-cm3.dtb' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/bcm2710-rpi-cm3.dtb'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/bootcode.bin' as
'rpi-firmware/bootcode.bin' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/bootcode.bin'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/cmdline.txt' as
'rpi-firmware/cmdline.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/cmdline.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/config.txt' as
'rpi-firmware/config.txt' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/config.txt'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/fixup.dat' as
'rpi-firmware/fixup.dat' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/fixup.dat'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/start.elf' as
'rpi-firmware/start.elf' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/start.elf'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'rpi-firmware/overlays' as
'rpi-firmware/overlays' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/rpi-firmware/overlays'
'::'" (stderr):
INFO: vfat(boot.vfat): adding file 'zImage' as 'zImage' ...
INFO: vfat(boot.vfat): cmd: "MTOOLS_SKIP_CHECK=1 mcopy -bsp -i
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat'
'/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/zImage'
'::'" (stderr):
INFO: hdimage(sdcard.img): adding partition 'boot' (in MBR) from 'boot.vfat'
...
ERROR: hdimage(sdcard.img): fiemap
/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/boot.vfat:
25 Inappropriate ioctl for device
ERROR: hdimage(sdcard.img): failed to write image partition 'boot'
INFO: hdimage(sdcard.img): cmd: "rm -f
"/home/marie/buildroot-2020.08-rc1/buildroot-2020.08-rc1/output/images/sdcard.img""
(stderr):
ERROR: hdimage(sdcard.img): failed to generate sdcard.img
make: *** [Makefile:835: target-post-image] Error 1
--
You are receiving this mail because:
You are on the CC list for the bug.
next reply other threads:[~2020-08-10 19:08 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-10 19:08 bugzilla at busybox.net [this message]
2020-08-10 21:24 ` [Buildroot] [Bug 13146] raspberrypi3_defconfig: "Inappropriate ioctl for device" almost at end when sdcard.img is created bugzilla at busybox.net
2020-08-11 6:59 ` bugzilla at busybox.net
2020-08-11 7:24 ` bugzilla at busybox.net
2020-08-11 7:26 ` bugzilla at busybox.net
2020-08-11 7:38 ` bugzilla at busybox.net
2020-08-11 15:47 ` bugzilla at busybox.net
2020-08-11 16:58 ` bugzilla at busybox.net
2020-08-11 17:00 ` bugzilla at busybox.net
2020-08-11 19:27 ` bugzilla at busybox.net
2020-08-11 19:31 ` bugzilla at busybox.net
2020-08-11 19:33 ` bugzilla at busybox.net
2020-08-11 20:10 ` bugzilla at busybox.net
2020-08-11 20:14 ` bugzilla at busybox.net
2020-08-12 15:38 ` bugzilla at busybox.net
2020-08-12 19:23 ` bugzilla at busybox.net
2020-08-12 19:40 ` bugzilla at busybox.net
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-13146-163@https.bugs.busybox.net/ \
--to=bugzilla@busybox.net \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox