From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla at busybox.net Date: Sun, 18 Dec 2011 05:28:37 +0000 (UTC) Subject: [Buildroot] [Bug 4634] New: Bigendian binary is output even if it is configured to output little endian Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net https://bugs.busybox.net/show_bug.cgi?id=4634 Summary: Bigendian binary is output even if it is configured to output little endian Product: buildroot Version: 2011.11 Platform: PC OS/Version: Linux Status: NEW Severity: major Priority: P5 Component: Other AssignedTo: unassigned at buildroot.uclibc.org ReportedBy: matusita at k-micro.com CC: buildroot at uclibc.org Estimated Hours: 0.0 I set build options as below in "make menuconfig" to build root filesystem: Target Architecture (mipsel) Target Architecture Variant (mips 32r2) Toolcain-Toolchain type (External toolchain) Toolcain-Toolchain (CodeSourcery MIPS 2011.03) I expected that little enfian binary will be output because "mipsel" is selected. But it was big endian. I confirmed it by objdump with "-f" option like below. % mips-linux-gnu-objdump -f busybox busybox: file format elf32-tradbigmips <-- Big endian !!! architecture: mips:isa32r2, flags 0x00000112: EXEC_P, HAS_SYMS, D_PAGED start address 0x00403f00 So, I saw following file: toolchain/toolchain-external/ext-tool.mk And I understand that this script get libraries' location by calling (prefix)-gcc with following options: -print-sysroot -print-file-name=libc.a But as for this toolchain(CodeSourcery MIPS 2011.03), it is need to set "-EL" option as well to get correct location of little endian libraries. -- Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.