From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla at busybox.net Date: Thu, 29 Jan 2015 00:04:18 +0000 (UTC) Subject: [Buildroot] [Bug 7844] New: Lua with hard-float on MIPS by buildroot doesn't work Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net https://bugs.busybox.net/show_bug.cgi?id=7844 Summary: Lua with hard-float on MIPS by buildroot doesn't work Product: buildroot Version: 2014.11 Platform: PC OS/Version: Linux Status: NEW Severity: critical Priority: P5 Component: Other AssignedTo: unassigned at buildroot.uclibc.org ReportedBy: brotherjinho at gmail.com CC: buildroot at uclibc.org Estimated Hours: 0.0 I found something strange. I wrote simple script that print the variable in Lua. It worked on x86 on linux. I tried to run it on my target device that is MIPS little endian. I prepared the lua by buildroot. I used 'hard-float' option for performance issue. But this simple script doesn't work. I used Sourcery CodeBench. I tested it with 'soft-float' option. Then lua worked correctly. Have you the experience like that? The lua code is like below. ================= local var = 131523; print(var); ================= It must print 131523. But my target printed 0 . What's wrong? -- Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.