From mboxrd@z Thu Jan 1 00:00:00 1970 From: bugzilla at busybox.net Date: Sun, 29 Nov 2015 20:23:58 +0000 (UTC) Subject: [Buildroot] [Bug 8491] New: libglib2 2.46.1 not Building for armv5 on 2015.11-rc3 Message-ID: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: buildroot@busybox.net https://bugs.busybox.net/show_bug.cgi?id=8491 Summary: libglib2 2.46.1 not Building for armv5 on 2015.11-rc3 Product: buildroot Version: unspecified Platform: PC OS/Version: Linux Status: NEW Severity: minor Priority: P2 Component: Other AssignedTo: unassigned at buildroot.uclibc.org ReportedBy: brandurs at yahoo.com CC: buildroot at uclibc.org Estimated Hours: 0.0 When configure runs.. configure: WARNING: unrecognized options: --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6 when building.. CC libglib_2_0_la-gthread.lo /tmp/.private/root/ccSdfBdl.s: Assembler messages: /tmp/.private/root/ccSdfBdl.s:1010: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r12,r12,ror#3' /tmp/.private/root/ccSdfBdl.s:1010: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r12,r12,ror#13' /tmp/.private/root/ccSdfBdl.s:1011: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r12,r12,ror#29' /tmp/.private/root/ccSdfBdl.s:1011: Error: shifts in CMP/MOV instructions are only supported in unified syntax -- `mov r12,r12,ror#19' /tmp/.private/root/ccSdfBdl.s:1012: Error: lo register required -- `orr r10,r10,r10' Makefile:2087: recipe for target 'libglib_2_0_la-gslice.lo' failed -- Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email ------- You are receiving this mail because: ------- You are on the CC list for the bug.