From mboxrd@z Thu Jan  1 00:00:00 1970
From: bugzilla at busybox.net <bugzilla@busybox.net>
Date: Mon, 15 Aug 2016 17:31:51 +0000
Subject: [Buildroot] [Bug 9176] New: minnowboard : USB not detected
Message-ID: <bug-9176-163@https.bugs.busybox.net/>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

https://bugs.busybox.net/show_bug.cgi?id=9176

            Bug ID: 9176
           Summary: minnowboard : USB not detected
           Product: buildroot
           Version: 2015.11
          Hardware: PC
                OS: Linux
            Status: NEW
          Severity: critical
          Priority: P5
         Component: Other
          Assignee: unassigned at buildroot.uclibc.org
          Reporter: christophebricout at yahoo.fr
                CC: buildroot at uclibc.org
  Target Milestone: ---

Created attachment 6606
  --> https://bugs.busybox.net/attachment.cgi?id=6606&action=edit
.config file

Dear All,

I have generated an image using buildroot, targeting minnowboard and the
.config file. This image works fine and boot correctly on SD Card.

The problems seems to come when I am plugging an USB pendrive.

The device is "detected" but it is not mounted automatically.
The message displayed after inserting the USB pendrive is: "usb 1-1: new
high-speed USB device number 2 using xhci_hcd".

I have tried to change the "dev managment" using the 3 buildroot options but
the problem still occured.

To complete my point, the same USB pendrive is detected in a linux machine
(CENTOS7).  By this way, we can reasonably say that the problem refers to the
image generated by buildroot.

I am not able to figure out this issue.
Anyway, I can make some additional experiments.
Thanks in advance for your support.
Best Regards
Christophe

-- 
You are receiving this mail because:
You are on the CC list for the bug.