Re: [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board

From: "Sébastien Szymanski" <sebastien.szymanski@armadeus.com>
To: Laurentiu Mihalcea <laurentiumihalcea111@gmail.com>,
	buildroot@buildroot.org
Cc: Gary Bisson <bisson.gary@gmail.com>,
	Refik Tuzakli <tuzakli.refik@gmail.com>,
	Erik Larsson <karl.erik.larsson@gmail.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	Fabio Estevam <festevam@gmail.com>
Subject: Re: [Buildroot] [PATCH 00/10] Add support for IMX95-15x15-FRDM board
Date: Thu, 5 Feb 2026 14:28:10 +0100	[thread overview]
Message-ID: <e2a9dfc8-3b0b-4397-b453-76c88ca2a781@armadeus.com> (raw)
In-Reply-To: <fa075240-a629-4f07-87d5-717c8dcca539@gmail.com>

Hello Laurentiu, all,

On 2/3/26 5:40 PM, Laurentiu Mihalcea wrote:
> 
> On 2/3/2026 5:52 PM, Sébastien Szymanski wrote:
>> Hello Laurentiu, all,
>>
>> On 2/3/26 4:36 PM, Laurentiu Mihalcea wrote:
>>> From: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
>>>
>>> Hi folks,
>>>
>>> This series introduces support for NXP's IMX95-15x15-FRDM board.
>>
>> Nice! I was working on adding i.MX95 too and just saw your patches! I will try you patches then!
> 
> 
> Thanks, let me know if you have any feedback :)

I was hoping to be able to test your patches on my MX95LP4XEVK-15 but it 
has an iMX95 A1 :/ It looks like the latest release (LF6.12.49-2.2.0) 
only supports B0, right ?

Regards,

> 
> 
>>
>>>
>>> So, a little bit about the board: as of today, the board hasn't been
>>> officially launched, but, as far as I was told, this should happen in this
>>> quarter. Because of this, we still have some gaps to fill in the
>>> documentation (see missing links from the board's readme.txt).
>>>
>>> Some hardware-related information for the board (not exhaustive):
>>>
>>>     1) Based on MX95 15x15 B0 silicon.
>>>     2) 8GB LPDDR4X DRAM
>>>     3) 32GB eMMC
>>>     4) 2 x ENET 1GBs
>>>
>>> Some comments regarding the changes introduced by this series:
>>>
>>>     1) imx-mkimage version bump was done because the board didn't seem
>>>     to be able to boot using the previous version.
>>>
>>>     2) firmware-ele-imx version bump was done because previous version
>>>     didn't include the firmware for B0 revision (it only seemed to include
>>>     the one for A0).
>>
>> I have sent patches to bump several i.MX packages:
>>
>> https://lore.kernel.org/buildroot/20260203-bump-imx-packages-lf-6-12-49-2-2-0-v1-1-548f3fc77a59@armadeus.com/
>>
>> Regards,
> 
> 
> Ah, very sorry for the duplication. Your patches should be all the bumps we need.
> 
> Will drop the updates from this series once yours lands.
> 
> 
> Thanks,
> 
> Laurentiu
> 

-- 
Sébastien Szymanski, Armadeus Systems
Software engineer
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot