From: Kris Bahnsen <kris@embeddedARM.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 1/3 v2] package/kmod: explicitly disable compression when not enabled
Date: Tue, 21 Jul 2020 14:45:34 -0700 [thread overview]
Message-ID: <e9725d8a-e123-3c31-470d-e95f24ed9ee1@embeddedarm.com> (raw)
In-Reply-To: <CANQCQpYwWseH-9LFoOceLqyAgVYF_Mm7EHs379q0VAB+Rdfisw@mail.gmail.com>
Yann,
> On Sun, May 3, 2020 at 8:12 AM Yann E. MORIN <yann.morin.1998@free.fr> wrote:
>> Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
>> Cc: Yegor Yefremov <yegorslists@googlemail.com>
Tested support for compressed kernel modules. Did not test signed modules.
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_ENABLE_NEON=y
BR2_ARM_ENABLE_VFP=y
BR2_ARM_FPU_VFPV3=y
BR2_CCACHE=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_KERNEL_HEADERS_4_14=y
BR2_GCC_VERSION_8_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_GCC_ENABLE_LTO=y
BR2_GCC_ENABLE_OPENMP=y
BR2_TARGET_GENERIC_HOSTNAME="tsa38x"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV=y
BR2_TARGET_TZ_INFO=y
BR2_ROOTFS_OVERLAY="$(BR2_EXTERNAL_TECHNOLOGIC_PATH)/board/tsa38x/rootfs_overlay"
BR2_ROOTFS_POST_BUILD_SCRIPT="$(BR2_EXTERNAL_TECHNOLOGIC_PATH)/board/tsa38x/post-build.sh"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call
github,embeddedarm,linux-a38x,9007c40f288d3eb01689c66ac0fad166d63c1958)/linux-9007c40f288d3eb01689c66ac0fad166d63c1958.tar.gz"
BR2_LINUX_KERNEL_DEFCONFIG="tsa38x"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="armada-385-ts7840"
BR2_LINUX_KERNEL_INSTALL_TARGET=y
BR2_PACKAGE_LINUX_TOOLS_GPIO=y
BR2_PACKAGE_LINUX_TOOLS_IIO=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_BUSYBOX_WATCHDOG=y
BR2_PACKAGE_BUSYBOX_WATCHDOG_PERIOD="30"
BR2_PACKAGE_BZIP2=y
BR2_PACKAGE_XZ=y
BR2_PACKAGE_LINUX_FIRMWARE=y
BR2_PACKAGE_LINUX_FIRMWARE_IMX_SDMA=y
BR2_PACKAGE_LIBZIP=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_LIBOPENSSL_BIN=y
BR2_PACKAGE_EXPAT=y
BR2_PACKAGE_LIBEVENT=y
BR2_PACKAGE_LIBGLIB2=y
# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
BR2_PACKAGE_KMOD=y
BR2_PACKAGE_KMOD_TOOLS=y
BR2_TARGET_ROOTFS_TAR_XZ=y
BR2_PACKAGE_HOST_KMOD_XZ=y
BR2_PACKAGE_HOST_UBOOT_TOOLS=y
BR2_PACKAGE_HOST_UTIL_LINUX=y
Relevant Linux Kernel options
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS=y
CONFIG_MODULE_COMPRESS_XZ=y
Tested-by: Kris Bahnsen <kris@embeddedarm.com>
--
Best Regards,
________________________________________________________________
Kris Bahnsen, Technologic Systems | voice: (480) 837-5200
16525 East Laser Drive | fax: (480) 837-5300
Fountain Hills, AZ 85268 | web: www.embeddedARM.com
next prev parent reply other threads:[~2020-07-21 21:45 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-03 13:09 [Buildroot] [PATCH 0/3 v2] package/kmod: add support for compressed modules (branch yem/host-kmod-z) Yann E. MORIN
2020-05-03 13:09 ` [Buildroot] [PATCH 1/3 v2] package/kmod: explicitly disable compression when not enabled Yann E. MORIN
2020-05-15 0:29 ` Matthew Weber
2020-07-07 15:51 ` Matthew Weber
2020-07-21 21:45 ` Kris Bahnsen [this message]
2020-05-03 13:10 ` [Buildroot] [PATCH 2/3 v2] package/kmod: add option for host variant Yann E. MORIN
2020-05-15 0:29 ` Matthew Weber
2020-05-03 13:10 ` [Buildroot] [PATCH 3/3 v2] package/lmod: add compression support for the " Yann E. MORIN
2020-05-15 0:30 ` Matthew Weber
2020-05-15 11:41 ` Matthew Weber
2020-10-06 19:49 ` [Buildroot] [PATCH 0/3 v2] package/kmod: add support for compressed modules (branch yem/host-kmod-z) Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e9725d8a-e123-3c31-470d-e95f24ed9ee1@embeddedarm.com \
--to=kris@embeddedarm.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox