From mboxrd@z Thu Jan  1 00:00:00 1970
From: Grant Edwards <grant.b.edwards@gmail.com>
Date: Wed, 27 Jan 2010 16:10:35 +0000 (UTC)
Subject: [Buildroot] Buildroot How-To for QEMU/ARM
References: <413172.3712.qm@web44802.mail.sp1.yahoo.com>
Message-ID: <hjpohq$hh6$1@ger.gmane.org>
List-Id: <buildroot.busybox.net>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: buildroot@busybox.net

On 2010-01-27, Jim Thomas <jimthomasembedded@yahoo.com> wrote:
> Hello,
>
> I can build qemu-0.12.2 under Ubuntu 9.10 and boot Linux in
> QEMU using the pre-built kernel and RFS in arm-test-0.2, also
> from the QEMU project.
>
> Now I want to use QEMU to boot a Linux kernel and RFS that I
> built myself for ARM using buildroot-2009.11.
>
> I have not had much luck. Based on web searching, I have tried
> twisting knobs in 'make menuconfig' and rebuilt perhaps a
> couple of dozen times.
>
> Rather than do a core dump here of the details, I thought I
> would ask:
>
> Has anyone used buildroot-2009.11 to build a kernel and RFS
> for ARM that boot successfully under qemu-0.12.2?

I built for arm-integrator using HEAD back in
November/December, and it ran fine on qemu-0.9.1.  I didn't do
much with it other than boot it up, log in, and test the
virtual serial ports.

> Do step-by-step notes exist for how to do this for ARM that
> were written for these latest versions of Buildroot and QEMU,
> or that have been verified as still complete and correct?

Not that I've found.  There were some articles written a couple
years ago that have step-by-step instructions, but they're
missing a step or two and are also now out of date in a few
spots.

Here's the .config file I last used -- AFAIR it was working at
that point:

# Automatically generated make config: don't edit
# Wed Dec 16 09:10:07 2009
#
BR2_HAVE_DOT_CONFIG=y
BR2_VERSION="2009.11-git"
# BR2_alpha is not set
BR2_arm=y
# BR2_armeb is not set
# BR2_avr32 is not set
# BR2_cris is not set
# BR2_ia64 is not set
# BR2_i386 is not set
# BR2_m68k is not set
# BR2_mips is not set
# BR2_mipsel is not set
# BR2_nios2 is not set
# BR2_powerpc is not set
# BR2_sh is not set
# BR2_sh64 is not set
# BR2_sparc is not set
# BR2_sparc64 is not set
# BR2_x86_64 is not set
# BR2_xtensa is not set
# BR2_generic_arm is not set
# BR2_arm7tdmi is not set
# BR2_arm610 is not set
# BR2_arm710 is not set
# BR2_arm720t is not set
# BR2_arm920t is not set
# BR2_arm922t is not set
BR2_arm926t=y
# BR2_arm10t is not set
# BR2_arm1136jf_s is not set
# BR2_arm1176jz_s is not set
# BR2_arm1176jzf_s is not set

#
# cortex-A8 needs gcc >= 4.4.x
#
# BR2_cortex_a8 is not set
# BR2_sa110 is not set
# BR2_sa1100 is not set
# BR2_xscale is not set
# BR2_iwmmxt is not set
BR2_ARM_TYPE="ARM926T"
BR2_ARM_EABI=y
# BR2_ARM_OABI is not set
BR2_ARCH="arm"
BR2_ENDIAN="LITTLE"
BR2_GCC_TARGET_TUNE="arm9tdmi"
BR2_GCC_TARGET_ARCH="armv5te"
BR2_GCC_TARGET_ABI="aapcs-linux"

#
# Target options
#

#
# Preset Devices
#
BR2_TARGET_ARMLTD=y

#
# ARM Ltd. based Device Support
#
BR2_TARGET_ARM_INTEGRATOR_926=y
# BR2_TARGET_ARM_INTEGRATOR_926_HUGE is not set
BR2_BOARD_NAME="integrator926"
BR2_BOARD_PATH="target/device/ARMLTD/$(BR2_BOARD_NAME)"
# BR2_TARGET_ATMEL is not set
# BR2_TARGET_KWIKBYTE is not set

#
# Generic System Support
#
# BR2_TARGET_GENERIC_ACCESS_POINT is not set
# BR2_TARGET_GENERIC_FIREWALL is not set

#
# Generic development system requires a toolchain with WCHAR and PROGRAM_INVOCATION support
#
BR2_TARGET_GENERIC_HOSTNAME="buildroot"
BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot"
# BR2_TARGET_GENERIC_GETTY is not set

#
# Build options
#
BR2_WGET="wget --passive-ftp -nd"
BR2_SVN_CO="svn co"
BR2_SVN_UP="svn up"
BR2_BZR_CO="bzr co"
BR2_BZR_UP="bzr up"
BR2_GIT="git clone"
BR2_ZCAT="gzip -d -c"
BR2_BZCAT="bzcat"
BR2_TAR_OPTIONS=""
BR2_DL_DIR="$(TOPDIR)/dl"
BR2_COPYTO=""

#
# Mirrors and Download locations
#
BR2_PRIMARY_SITE=""
BR2_BACKUP_SITE="http://buildroot.net/downloads/sources/"
BR2_SOURCEFORGE_MIRROR="switch"
BR2_KERNEL_MIRROR="http://www.kernel.org/pub/"
BR2_GNU_MIRROR="http://ftp.gnu.org/pub/gnu"
BR2_DEBIAN_MIRROR="http://ftp.debian.org"
BR2_STAGING_DIR="$(BUILD_DIR)/staging_dir"
BR2_GNU_BUILD_SUFFIX="pc-linux-gnu"
BR2_GNU_TARGET_SUFFIX="linux-uclibcgnueabi"
BR2_JLEVEL=1
# BR2_PREFER_IMA is not set
# BR2_DEPRECATED is not set
BR2_RECENT=y
# BR2_CONFIG_CACHE is not set
# BR2_ENABLE_DEBUG is not set
BR2_STRIP_strip=y
# BR2_STRIP_sstrip is not set
# BR2_STRIP_none is not set
# BR2_OPTIMIZE_0 is not set
# BR2_OPTIMIZE_1 is not set
# BR2_OPTIMIZE_2 is not set
# BR2_OPTIMIZE_3 is not set
BR2_OPTIMIZE_S=y
# BR2_PREFER_STATIC_LIB is not set
# BR2_HAVE_MANPAGES is not set
# BR2_HAVE_INFOPAGES is not set
# BR2_HAVE_DOCUMENTATION is not set
# BR2_HAVE_DEVFILES is not set
BR2_UPDATE_CONFIG=y

#
# Toolchain
#
BR2_TOOLCHAIN_BUILDROOT=y
# BR2_TOOLCHAIN_EXTERNAL is not set
# BR2_TOOLCHAIN_EXTERNAL_SOURCE is not set
BR2_TOOLCHAIN_SOURCE=y
BR2_EXT_GCC_VERSION_4_1_2=y
BR2_EXT_GCC_VERSION_4_2_1=y
BR2_EXT_GCC_VERSION_4_2_2=y
BR2_EXT_GCC_VERSION_4_2_3=y
BR2_EXT_BINUTILS_VERSION_2_17=y
BR2_EXT_BINUTILS_VERSION_2_18=y
BR2_EXT_UCLIBC_VERSION_0_9_28_3=y
BR2_EXT_UCLIBC_VERSION_0_9_29=y
BR2_EXT_UCLIBC_VERSION_0_9_30=y
BR2_EXT_UCLIBC_VERSION_0_9_30_1=y

#
# Kernel Header Options
#
# BR2_KERNEL_HEADERS_2_6_26 is not set
# BR2_KERNEL_HEADERS_2_6_27 is not set
# BR2_KERNEL_HEADERS_2_6_28 is not set
# BR2_KERNEL_HEADERS_2_6_29 is not set
# BR2_KERNEL_HEADERS_2_6_30 is not set
BR2_KERNEL_HEADERS_2_6_31=y
# BR2_KERNEL_HEADERS_VERSION is not set
# BR2_KERNEL_HEADERS_SNAP is not set
BR2_DEFAULT_KERNEL_HEADERS="2.6.31.6"

#
# uClibc Options
#
# BR2_UCLIBC_VERSION_0_9_28_3 is not set
# BR2_UCLIBC_VERSION_0_9_29 is not set
BR2_UCLIBC_VERSION_0_9_30=y
# BR2_UCLIBC_VERSION_0_9_30_1 is not set
# BR2_UCLIBC_VERSION_SNAPSHOT is not set
BR2_UCLIBC_VERSION_STRING="0.9.30"
BR2_UCLIBC_CONFIG="target/device/ARMLTD/uClibc.integrator926.config"
# BR2_PTHREAD_DEBUG is not set
# BR2_UCLIBC_INSTALL_TEST_SUITE is not set

#
# Binutils Options
#
# BR2_BINUTILS_VERSION_2_17 is not set
# BR2_BINUTILS_VERSION_2_17_50_0_17 is not set
# BR2_BINUTILS_VERSION_2_18 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_1 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_3 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_6 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_8 is not set
# BR2_BINUTILS_VERSION_2_18_50_0_9 is not set
BR2_BINUTILS_VERSION_2_19=y
# BR2_BINUTILS_VERSION_2_19_1 is not set
BR2_BINUTILS_VERSION="2.19"
BR2_EXTRA_BINUTILS_CONFIG_OPTIONS=""

#
# GCC Options
#
# BR2_GCC_VERSION_4_1_2 is not set
# BR2_GCC_VERSION_4_2_1 is not set
# BR2_GCC_VERSION_4_2_2 is not set
# BR2_GCC_VERSION_4_2_3 is not set
# BR2_GCC_VERSION_4_2_4 is not set
# BR2_GCC_VERSION_4_3_2 is not set
# BR2_GCC_VERSION_4_3_3 is not set
BR2_GCC_VERSION_4_3_4=y
# BR2_GCC_VERSION_4_4_X is not set
BR2_GCC_SUPPORTS_SYSROOT=y
BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE=y
BR2_GCC_VERSION="4.3.4"
BR2_TOOLCHAIN_SYSROOT=y
# BR2_GCC_USE_SJLJ_EXCEPTIONS is not set
BR2_EXTRA_GCC_CONFIG_OPTIONS=""
# BR2_GCC_CROSS_FORTRAN is not set
# BR2_INSTALL_OBJC is not set
# BR2_INSTALL_FORTRAN is not set
BR2_GCC_SHARED_LIBGCC=y
BR2_GCC_ENABLE_TLS=y

#
# Ccache Options
#
# BR2_CCACHE is not set

#
# Gdb Options
#
# BR2_PACKAGE_GDB is not set
# BR2_PACKAGE_GDB_SERVER is not set
# BR2_PACKAGE_GDB_HOST is not set

#
# Common Toolchain Options
#
# BR2_LARGEFILE is not set
# BR2_INET_IPV6 is not set
# BR2_INET_RPC is not set
# BR2_ENABLE_LOCALE is not set
# BR2_ENABLE_LOCALE_PURGE is not set
# BR2_USE_WCHAR is not set
BR2_PREFER_SOFT_FLOAT=y
BR2_SOFT_FLOAT=y
# BR2_USE_SSP is not set
# BR2_PTHREADS_NONE is not set
# BR2_PTHREADS is not set
BR2_PTHREADS_OLD=y
# BR2_PTHREADS_NATIVE is not set
# BR2_PROGRAM_INVOCATION is not set
# BR2_INSTALL_LIBSTDCPP is not set
BR2_TARGET_OPTIMIZATION="-Os -pipe -fwrapv"
# BR2_ELF2FLT is not set
# BR2_MKLIBS is not set
# BR2_PACKAGE_SSTRIP_TARGET is not set
# BR2_PACKAGE_SSTRIP_HOST is not set
# BR2_ENABLE_MULTILIB is not set
BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y

#
# Package Selection for the target
#
BR2_PACKAGE_BUSYBOX=y
# BR2_BUSYBOX_VERSION_1_12_X is not set
BR2_BUSYBOX_VERSION_1_13_X=y
# BR2_BUSYBOX_VERSION_1_14_X is not set
# BR2_BUSYBOX_VERSION_1_15_X is not set
# BR2_PACKAGE_BUSYBOX_SNAPSHOT is not set
BR2_BUSYBOX_VERSION="1.13.4"
BR2_PACKAGE_BUSYBOX_FULLINSTALL=y
BR2_PACKAGE_BUSYBOX_CONFIG="package/busybox/busybox-1.13.x.config"
# BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is not set
BR2_PACKAGE_BUSYBOX_SKELETON=y

#
# The minimum needed to build a uClibc development system
#
# BR2_PACKAGE_FLEX is not set
# BR2_PACKAGE_GCC_TARGET is not set
# BR2_PACKAGE_MAKE is not set

#
# Other development stuff
#
# BR2_PACKAGE_AUTOCONF is not set
# BR2_PACKAGE_AUTOMAKE is not set
# BR2_PACKAGE_BISON is not set
# BR2_PACKAGE_CCACHE_TARGET is not set
# BR2_PACKAGE_DISTCC is not set
# BR2_PACKAGE_DMALLOC is not set
# BR2_PACKAGE_FAKEROOT is not set
BR2_HOST_FAKEROOT=y
# BR2_PACKAGE_GETTEXT is not set
# BR2_PACKAGE_LIBINTL is not set
# BR2_PACKAGE_LIBGMP is not set
# BR2_PACKAGE_GPERF is not set
# BR2_PACKAGE_LIBMPFR is not set
# BR2_PACKAGE_LIBTOOL is not set
# BR2_PACKAGE_M4 is not set

#
# oprofile requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_PKG_CONFIG is not set
# BR2_PACKAGE_READLINE is not set
# BR2_PACKAGE_PCRE is not set

#
# Other stuff
#
# BR2_PACKAGE_AT is not set
# BR2_PACKAGE_BEECRYPT is not set
# BR2_PACKAGE_BERKELEYDB is not set
# BR2_PACKAGE_BSDIFF is not set
# BR2_PACKAGE_CUPS is not set
# BR2_PACKAGE_CUSTOMIZE is not set
# BR2_PACKAGE_FILE is not set
# BR2_PACKAGE_GAMIN is not set

#
# icu requires a toolchain with C++ support and WCHAR enabled
#
# BR2_PACKAGE_KEXEC is not set
# BR2_PACKAGE_LIBCONFIG is not set
# BR2_PACKAGE_LIBCONFUSE is not set
# BR2_PACKAGE_LIBDAEMON is not set
# BR2_PACKAGE_LIBELF is not set
# BR2_PACKAGE_LIBEVENT is not set
# BR2_PACKAGE_LIBGCRYPT is not set
# BR2_PACKAGE_LIBGPG_ERROR is not set
# BR2_PACKAGE_LIBICONV is not set
# BR2_PACKAGE_LIBIDN is not set
# BR2_PACKAGE_LIBLOCKFILE is not set
# BR2_PACKAGE_LIBOIL is not set
# BR2_PACKAGE_LIBSYSFS is not set
# BR2_PACKAGE_LOCKFILE_PROGS is not set

#
# logrotate     - disabled (requires wchar support)
#
# BR2_PACKAGE_LSOF is not set
# BR2_PACKAGE_LTP-TESTSUITE is not set
# BR2_PACKAGE_LTRACE is not set
# BR2_PACKAGE_MEMSTAT is not set
# BR2_PACKAGE_NG_SPICE_REWORK is not set
# BR2_PACKAGE_POPT is not set
# BR2_PACKAGE_SCREEN is not set
# BR2_PACKAGE_SHARED_MIME_INFO is not set
# BR2_PACKAGE_STARTUP_NOTIFICATION is not set
# BR2_PACKAGE_STRACE is not set
# BR2_PACKAGE_SUDO is not set

#
# Database
#

#
# Mysql client requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_SQLITE is not set

#
# Text editors
#
# BR2_PACKAGE_ED is not set
# BR2_PACKAGE_NANO is not set
# BR2_PACKAGE_UEMACS is not set

#
# Networking
#

#
# Networking applications
#
# BR2_PACKAGE_ARGUS is not set
# BR2_PACKAGE_AVAHI is not set
# BR2_PACKAGE_AXEL is not set

#
# bind requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_BMON is not set
# BR2_PACKAGE_BRIDGE is not set

#
# ctorrent requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_DNSMASQ is not set
# BR2_PACKAGE_DROPBEAR is not set
# BR2_PACKAGE_ETHTOOL is not set
# BR2_PACKAGE_HASERL is not set
# BR2_PACKAGE_IFPLUGD is not set

#
# iperf requires a toolchain with C++ support enabled
#

#
# iproute2 requires a toolchain with IPv6 support
#
# BR2_PACKAGE_IPSEC_TOOLS is not set

#
# iptables requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_IW is not set

#
# Kismet requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_L2TP is not set
# BR2_PACKAGE_LIBCGI is not set

#
# libcgicc requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_LIBCURL is not set
# BR2_PACKAGE_LIBDNET is not set
# BR2_PACKAGE_LIBEXOSIP2 is not set
# BR2_PACKAGE_LIBMICROHTTPD is not set
# BR2_PACKAGE_LIBNL is not set
# BR2_PACKAGE_LIBOSIP2 is not set
BR2_PACKAGE_LIBPCAP=y
# BR2_PACKAGE_LIBSOUP is not set

#
# libupnp requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_LINKS is not set
# BR2_PACKAGE_LRZSZ is not set
# BR2_PACKAGE_MIIDIAG is not set
# BR2_PACKAGE_MROUTED is not set
# BR2_PACKAGE_MUTT is not set
# BR2_PACKAGE_NBD is not set

#
# ncftp requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_NEON is not set
# BR2_PACKAGE_NETPLUG is not set
# BR2_PACKAGE_NETSNMP is not set
# BR2_PACKAGE_NETSTAT_NAT is not set

#
# nfs-utils requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_NTP is not set
# BR2_PACKAGE_OLSR is not set
# BR2_PACKAGE_OPENNTPD is not set
BR2_PACKAGE_OPENSSH=y
BR2_PACKAGE_OPENSSL=y
# BR2_PACKAGE_OPENSSL_BIN is not set
# BR2_PACKAGE_OPENSSL_ENGINES is not set
# BR2_PACKAGE_OPENVPN is not set

#
# portmap requires a toolchain with 'Enable RPC' selected
#
# BR2_PACKAGE_PPPD is not set
# BR2_PACKAGE_RP_PPPOE is not set
# BR2_PACKAGE_PPTP_LINUX is not set
# BR2_PACKAGE_PROFTPD is not set
# BR2_PACKAGE_QUAGGA is not set
# BR2_PACKAGE_RSYNC is not set
# BR2_PACKAGE_SAMBA is not set
# BR2_PACKAGE_SOCAT is not set
# BR2_PACKAGE_SPAWN_FCGI is not set
# BR2_PACKAGE_STUNNEL is not set
BR2_PACKAGE_TCPDUMP=y
# BR2_PACKAGE_TCPDUMP_SMB is not set
# BR2_PACKAGE_DHCPDUMP is not set
# BR2_PACKAGE_TN5250 is not set
# BR2_PACKAGE_TTCP is not set
# BR2_PACKAGE_UDPCAST is not set
# BR2_PACKAGE_VPNC is not set
# BR2_PACKAGE_VSFTPD is not set
# BR2_PACKAGE_VTUN is not set
# BR2_PACKAGE_WEBIF is not set
# BR2_PACKAGE_WIRELESS_TOOLS is not set
# BR2_PACKAGE_WPA_SUPPLICANT is not set

#
# Hardware handling / blockdevices and filesystem maintenance
#

#
# dbus not available (need expat or libxml2)
#

#
# dmraid requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_DOSFSTOOLS is not set

#
# e2fsprogs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_EEPROG is not set
# BR2_PACKAGE_FCONFIG is not set
# BR2_PACKAGE_FIS is not set

#
# libfuse requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_GADGETFS_TEST is not set

#
# gvfs requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_HAL is not set
# BR2_PACKAGE_HWDATA is not set
# BR2_PACKAGE_I2C_TOOLS is not set
# BR2_PACKAGE_INPUT_TOOLS is not set
# BR2_PACKAGE_IOSTAT is not set
# BR2_PACKAGE_LIBAIO is not set
# BR2_PACKAGE_LIBRAW1394 is not set
# BR2_PACKAGE_LIBUSB is not set
# BR2_PACKAGE_LM_SENSORS is not set

#
# lvm2 requires a toolchain with LARGEFILE support
#
# BR2_PACKAGE_MDADM is not set
# BR2_PACKAGE_MEMTESTER is not set
# BR2_PACKAGE_MTD is not set

#
# ntfs-3g requires a toolchain with LARGEFILE and WCHAR support
#

#
# ntfsprogs requires a toolchain with WCHAR support
#
BR2_PACKAGE_PCIUTILS=y
# BR2_PACKAGE_PCMCIA is not set
# BR2_PACKAGE_SETSERIAL is not set
# BR2_PACKAGE_SMARTMONTOOLS is not set
# BR2_PACKAGE_SYSSTAT is not set
# BR2_PACKAGE_USB_MODESWITCH is not set
# BR2_PACKAGE_USBMOUNT is not set
# BR2_PACKAGE_USBUTILS is not set
# BR2_PACKAGE_WIPE is not set
# BR2_PACKAGE_XFSPROGS is not set

#
# Audio and video libraries and applications
#
# BR2_PACKAGE_ALSA_LIB is not set

#
# alsa-utils requires a toolchain with LARGEFILE support
#

#
# asterisk	- disabled (required openssl and mpg123)
#
# BR2_PACKAGE_AUMIX is not set
# BR2_PACKAGE_FLAC is not set
# BR2_PACKAGE_GSTREAMER is not set
# BR2_PACKAGE_LIBID3TAG is not set
# BR2_PACKAGE_LIBMAD is not set
# BR2_PACKAGE_LIBMMS is not set
# BR2_PACKAGE_LIBMPD is not set
# BR2_PACKAGE_LIBOGG is not set
# BR2_PACKAGE_LIBSNDFILE is not set
# BR2_PACKAGE_LIBTHEORA is not set
# BR2_PACKAGE_LIBVORBIS is not set
# BR2_PACKAGE_MADPLAY is not set
# BR2_PACKAGE_MPG123 is not set
# BR2_PACKAGE_MPLAYER is not set
# BR2_PACKAGE_SPEEX is not set
# BR2_PACKAGE_SWFDEC is not set

#
# festival requires a toolchain with C++ support enabled
#

#
# taglib requires a toolchain with C++ support enabled
#
# BR2_PACKAGE_VLC is not set

#
# Graphic libraries and applications (graphic/text)
#

#
# text rendering libraries
#
# BR2_PACKAGE_NCURSES is not set
# BR2_PACKAGE_NEWT is not set
# BR2_PACKAGE_SLANG is not set

#
# text rendering applications
#
# BR2_PACKAGE_DIALOG is not set

#
# graphic libraries
#
# BR2_PACKAGE_DIRECTFB is not set
# BR2_PACKAGE_FBDUMP is not set
# BR2_PACKAGE_IMAGEMAGICK is not set
# BR2_PACKAGE_JPEG is not set
# BR2_PACKAGE_LIBART is not set
# BR2_PACKAGE_LIBPNG is not set
# BR2_PACKAGE_LIBUNGIF is not set
# BR2_PACKAGE_LINUX_FUSION is not set
# BR2_PACKAGE_PIXMAN is not set
# BR2_PACKAGE_SDL is not set
# BR2_PACKAGE_TIFF is not set

#
# busybox graphic applications
#

#
# --> May be broken in busybox
#
# BR2_PACKAGE_FBV is not set
# BR2_PACKAGE_FBSET is not set

#
# other GUIs
#

#
# qt requires a toolchain with C++ support enabled
#

#
# X.org requires a toolchain with WCHAR support
#

#
# X libraries and helper libraries
#
# BR2_PACKAGE_ATK is not set
# BR2_PACKAGE_CAIRO is not set
# BR2_PACKAGE_PANGO is not set
# BR2_PACKAGE_LIBDRM is not set
# BR2_PACKAGE_LIBERATION is not set
# BR2_PACKAGE_LIBGLIB12 is not set
# BR2_PACKAGE_LIBGLIB2 is not set
# BR2_PACKAGE_OPENMOTIF is not set
# BR2_PACKAGE_FONTCONFIG is not set
# BR2_PACKAGE_FREETYPE is not set
# BR2_PACKAGE_TSLIB is not set

#
# webkit requires a toolchain with C++ support and WCHAR enabled
#

#
# X Window managers
#
# BR2_PACKAGE_MATCHBOX is not set

#
# X applications
#
# BR2_PACKAGE_ALSAMIXERGUI is not set
# BR2_PACKAGE_GQVIEW is not set
# BR2_PACKAGE_GOB2 is not set
# BR2_PACKAGE_LEAFPAD is not set
# BR2_PACKAGE_PCMANFM is not set
# BR2_PACKAGE_SYLPHEED is not set
# BR2_PACKAGE_TORSMO is not set
# BR2_PACKAGE_X11VNC is not set
# BR2_PACKAGE_XPDF is not set
# BR2_PACKAGE_XSTROKE is not set

#
# Compressors / decompressors
#

#
# libarchive requires a toolchain with WCHAR support
#
# BR2_PACKAGE_LZO is not set
# BR2_PACKAGE_LZOP is not set

#
# lzma requires a toolchain with C++ support
#
BR2_PACKAGE_ZLIB=y

#
# Package managers
#
# BR2_PACKAGE_IPKG is not set
# BR2_PACKAGE_PORTAGE is not set

#
# Interpreter languages / Scripting
#
# BR2_PACKAGE_LUA is not set
# BR2_PACKAGE_MICROPERL is not set
# BR2_PACKAGE_PYTHON is not set

#
# ruby requires a toolchain with WCHAR support
#
# BR2_PACKAGE_TCL is not set
# BR2_PACKAGE_PHP is not set

#
# XML handling
#
# BR2_PACKAGE_EXPAT is not set
# BR2_PACKAGE_EZXML is not set
# BR2_PACKAGE_LIBXML2 is not set
# BR2_PACKAGE_LIBXSLT is not set

#
# xerces-c++ requires a toolchain with C++ support enabled
#

#
# Java
#
# BR2_PACKAGE_CLASSPATH is not set

#
# Games
#
# BR2_PACKAGE_GNUCHESS is not set
# BR2_PACKAGE_MAGICCUBE4D is not set
# BR2_PACKAGE_PRBOOM is not set
# BR2_PACKAGE_RUBIX is not set
# BR2_PACKAGE_VICE is not set
# BR2_PACKAGE_XBOARD is not set

#
# Target filesystem options
#
BR2_ROOTFS_PREFIX="rootfs"
BR2_ROOTFS_SUFFIX=""
BR2_ROOTFS_POST_BUILD_SCRIPT=""

#
# filesystem for target device
#
# BR2_TARGET_ROOTFS_CRAMFS is not set
# BR2_TARGET_ROOTFS_CLOOP is not set
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_BLOCKS=0
BR2_TARGET_ROOTFS_EXT2_INODES=0
BR2_TARGET_ROOTFS_EXT2_RESBLKS=0
BR2_TARGET_ROOTFS_EXT2_SQUASH=y
BR2_TARGET_ROOTFS_EXT2_OUTPUT="$(IMAGE).ext2"
BR2_TARGET_ROOTFS_EXT2_NONE=y
# BR2_TARGET_ROOTFS_EXT2_GZIP is not set
# BR2_TARGET_ROOTFS_EXT2_BZIP2 is not set
# BR2_TARGET_ROOTFS_EXT2_LZMA is not set
BR2_TARGET_ROOTFS_EXT2_COPYTO=""
# BR2_TARGET_ROOTFS_JFFS2 is not set
# BR2_TARGET_ROOTFS_SQUASHFS is not set
BR2_TARGET_ROOTFS_TAR=y
BR2_TARGET_ROOTFS_TAR_NONE=y
# BR2_TARGET_ROOTFS_TAR_GZIP is not set
# BR2_TARGET_ROOTFS_TAR_BZIP2 is not set
# BR2_TARGET_ROOTFS_TAR_LZMA is not set
BR2_TARGET_ROOTFS_TAR_OPTIONS=""
BR2_TARGET_ROOTFS_TAR_COPYTO=""
# BR2_TARGET_ROOTFS_CPIO is not set
# BR2_TARGET_ROOTFS_INITRAMFS is not set
# BR2_TARGET_ROOTFS_ROMFS is not set

#
# bootloader for target device
#
BR2_TARGET_UBOOT=y
BR2_TARGET_UBOOT_BOARDNAME="$(BOARD_NAME)"
BR2_TARGET_UBOOT_2009_08=y
# BR2_TARGET_UBOOT_2009_06 is not set
# BR2_TARGET_UBOOT_2009_03 is not set
# BR2_TARGET_UBOOT_2009_01 is not set
# BR2_TARGET_UBOOT_2008_10 is not set
# BR2_TARGET_UBOOT_1_2_0_ATMEL is not set
BR2_UBOOT_VERSION="2009.08"
BR2_U_BOOT_SITE="ftp://ftp.denx.de/pub/u-boot"
# BR2_TARGET_U_BOOT_ARCH_PATCH is not set
BR2_TARGET_UBOOT_CUSTOM_PATCH=""
# BR2_TARGET_UBOOT_SILENT is not set
# BR2_TARGET_UBOOT_TOOL_MKIMAGE is not set
# BR2_TARGET_UBOOT_TOOL_ENV is not set
# BR2_TARGET_UBOOT_DEFAULT_ENV is not set

#
# Kernel
#
# BR2_KERNEL_none is not set
BR2_KERNEL_LINUX_ADVANCED=y
# BR2_KERNEL_LINUX is not set
BR2_PACKAGE_LINUX=y
BR2_PACKAGE_LINUX_KCONFIG="target/device/ARMLTD/$(BR2_BOARD_NAME)/$(BR2_BOARD_NAME)-linux26-$(BR2_LINUX26_VERSION).config"
BR2_PACKAGE_LINUX_FORMAT="uImage"
BR2_KERNEL_CURRENT_VERSION="2.6.30.2"
BR2_KERNEL_LATEST_2_6_30="2"
BR2_KERNEL_LATEST_2_6_29="6"
BR2_KERNEL_LATEST_2_6_28="10"
BR2_KERNEL_LATEST_2_6_27="27"
BR2_KERNEL_LATEST_2_6_26="8"
BR2_KERNEL_LATEST_2_6_25="19"
BR2_KERNEL_LATEST_2_6_24="7"
BR2_KERNEL_SITE="http://ftp.kernel.org/pub/linux/kernel/v2.6"
BR2_MM_PATCH_SITE="http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6"
BR2_RC_MM_PATCH_DIR="$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)/2.6.$(BR2_KERNEL_NEXT_VERSION)-rc$(BR2_KERNEL_RC_LEVEL)-mm$(BR2_KERNEL_MM_LEVEL)"
BR2_LINUX_2_6_STABLE=y
# BR2_LINUX_2_6_30 is not set
# BR2_LINUX_2_6_29 is not set
# BR2_LINUX_2_6_28 is not set
# BR2_LINUX_2_6_27 is not set
# BR2_LINUX_2_6_26 is not set
# BR2_LINUX_2_6_25 is not set
# BR2_LINUX_2_6_24 is not set
# BR2_LINUX_2_6_31 is not set
# BR2_LINUX26_CUSTOM is not set

#
# Patches
#
# BR2_KERNEL_ARCH_PATCH_ENABLED is not set
BR2_LINUX_BSP_PATCH=""
BR2_DOWNLOAD_LINUX26_VERSION="$(BR2_KERNEL_CURRENT_VERSION)"
BR2_LINUX26_VERSION="$(BR2_KERNEL_CURRENT_VERSION)"

#
# Linux Kernel Configuration
#
BR2_PACKAGE_LINUX_USE_KCONFIG=y
# BR2_PACKAGE_LINUX_USE_DEFCONFIG is not set
# BR2_PACKAGE_LINUX_USE_XCONFIG is not set
# BR2_LINUX_BIN_BZIMAGE is not set
BR2_LINUX_BIN_UIMAGE=y
# BR2_LINUX_BIN_VMLINUX is not set
# BR2_LINUX_BIN_ZIMAGE is not set
# BR2_LINUX_BIN_CUSTOM is not set

#
# Destinations for linux kernel binaries
#
# BR2_LINUX_COPYTO_ROOTFS is not set
# BR2_LINUX_COPYTO_TFTPBOOT is not set
BR2_LINUX_COPYTO=""
# BR2_LINUX_COPY_CONFIGURATION is not set


-- 
Grant Edwards                   grante             Yow! I'm having fun
                                  at               HITCHHIKING to CINCINNATI
                               visi.com            or FAR ROCKAWAY!!