* [Buildroot] [Bug 3391] Add support for specifying an external kernel tree
From: bugzilla at busybox.net @ 2011-10-09 20:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <bug-3391-163@https.bugs.busybox.net/>
https://bugs.busybox.net/show_bug.cgi?id=3391
Peter Korsgaard <jacmet@uclibc.org> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
--- Comment #4 from Peter Korsgaard <jacmet@uclibc.org> ---
Fixed in git by Thomas/David (2690e76aa2)
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply
* [Buildroot] [Bug 3343] Add file:// download SITE_METHOD
From: bugzilla at busybox.net @ 2011-10-09 20:43 UTC (permalink / raw)
To: buildroot
In-Reply-To: <bug-3343-163@https.bugs.busybox.net/>
https://bugs.busybox.net/show_bug.cgi?id=3343
Peter Korsgaard <jacmet@uclibc.org> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
--- Comment #2 from Peter Korsgaard <jacmet@uclibc.org> ---
Fixed in git by Thomas/David (2690e76aa2adb4).
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply
* [Buildroot] [Bug 3331] xdata_xcursor-themes depends on xcursorgen
From: bugzilla at busybox.net @ 2011-10-09 20:33 UTC (permalink / raw)
To: buildroot
In-Reply-To: <bug-3331-163@https.bugs.busybox.net/>
https://bugs.busybox.net/show_bug.cgi?id=3331
Peter Korsgaard <jacmet@uclibc.org> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution| |FIXED
--- Comment #3 from Peter Korsgaard <jacmet@uclibc.org> ---
Fixed by Thomas in git (aeaa5e9422955c)
--
Configure bugmail: https://bugs.busybox.net/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are on the CC list for the bug.
^ permalink raw reply
* [Buildroot] [pull request] Pull request for branch for-2011.11/ext-toolchain-updates
From: Thomas Petazzoni @ 2011-10-09 20:05 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87y5wudkd4.fsf@macbook.be.48ers.dk>
Le Sun, 09 Oct 2011 21:40:23 +0200,
Peter Korsgaard <jacmet@uclibc.org> a ?crit :
> Thanks everyone, committed patches 1..7 (remaining 2 has open comments).
>
> Thomas, care to fixup and resend patch 8+9?
Yes, sure. I had rebased the whole series and fixed patches 8 and 9,
and was about to send them, but I have apparently some e-mails issues,
as I'm no longer receiving messages from the list. I'll try to fix
those problems tomorrow.
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [git commit] openocd: libusb patch: append rather than override LDFLAGS
From: Peter Korsgaard @ 2011-10-09 20:02 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=839ee761878b3e242f4fe4b4a95dfbf161b6b82a
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
...s-compilation-host-libsub-was-used-before.patch | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/openocd/openocd-0001-fix-cross-compilation-host-libsub-was-used-before.patch b/package/openocd/openocd-0001-fix-cross-compilation-host-libsub-was-used-before.patch
index 99ff04e..caf1a8b 100644
--- a/package/openocd/openocd-0001-fix-cross-compilation-host-libsub-was-used-before.patch
+++ b/package/openocd/openocd-0001-fix-cross-compilation-host-libsub-was-used-before.patch
@@ -23,7 +23,7 @@ index dfa1e8f..cfe2218 100644
+ dnl check for libusb
+ PKG_CHECK_MODULES(LIBUSB, libusb >= 0.1.11)
+ CFLAGS="$CFLAGS $LIBUSB_CFLAGS"
-+ LDFLAGS="$LFFLAGS $LIBUSB_LDFLAGS"
++ LDFLAGS="$LDFLAGS $LIBUSB_LDFLAGS"
+ LIBS="$LIBS $LIBUSB_LIBS"
build_usb=yes
fi
^ permalink raw reply related
* [Buildroot] [pull request] Pull request for branch for-2011.11/ext-toolchain-updates
From: Peter Korsgaard @ 2011-10-09 19:40 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1317583191.git.thomas.petazzoni@free-electrons.com>
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> The following changes since commit 8511728696a298ccdb8b902b60ab398d8f67e745:
Thomas> gnutls: bump to version 2.10.5 (2011-09-30 08:26:08 +0200)
Thanks everyone, committed patches 1..7 (remaining 2 has open comments).
Thomas, care to fixup and resend patch 8+9?
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery
From: Peter Korsgaard @ 2011-10-09 19:36 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=3a7149347c6290e1ab7045dd4f70e06d9426b716
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Now that CodeSourcery has been bought by Mentor Graphics, the
toolchains are named "Sourcery CodeBench". We rename the config short
description and adjust the help text, but we keep the option name in
order not to break existing configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/toolchain-external/Config.in | 130 ++++++++++++++++----------------
1 files changed, 65 insertions(+), 65 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 9fbc224..0a4b922 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -4,85 +4,85 @@ choice
prompt "Toolchain"
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103
- bool "CodeSourcery ARM 2011.03"
+ bool "Sourcery CodeBench ARM 2011.03"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20.51, glibc 2.13 and gdb 7.2.50,
- kernel headers 2.6.38. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51, glibc
+ 2.13 and gdb 7.2.50, kernel headers 2.6.38. It has support
+ for the following variants:
- ARMv5TE, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201009
- bool "CodeSourcery ARM 2010.09"
+ bool "Sourcery CodeBench ARM 2010.09"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.5.1, binutils 2.20, glibc 2.11 and gdb 7.2.50,
- kernel headers 2.6.35.2. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.5.1, binutils 2.20, glibc
+ 2.11 and gdb 7.2.50, kernel headers 2.6.35.2. It has support
+ for the following variants:
- ARMv5TE, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2010Q1
- bool "CodeSourcery ARM 2010q1"
+ bool "Sourcery CodeBench ARM 2010q1"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.4.1, binutils 2.19, glibc 2.11, gdb 7.0.50 and
- kernel headers 2.6.32. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc
+ 2.11, gdb 7.0.50 and kernel headers 2.6.32. It has support
+ for the following variants:
- ARMv5T, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3
- bool "CodeSourcery ARM 2009q3"
+ bool "Sourcery CodeBench ARM 2009q3"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.4.1, binutils 2.19, glibc 2.10 and gdb 6.8 and
- kernel headers 2.6.30. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc
+ 2.10 and gdb 6.8 and kernel headers 2.6.30. It has support
+ for the following variants:
- ARMv5T, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q1
- bool "CodeSourcery ARM 2009q1"
+ bool "Sourcery CodeBench ARM 2009q1"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.3.3, binutils 2.19, glibc 2.8 and gdb 6.8 and
- kernel headers 2.6.30. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.3.3, binutils 2.19, glibc 2.8
+ and gdb 6.8 and kernel headers 2.6.30. It has support for
+ the following variants:
- ARMv5T, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
- bool "CodeSourcery MIPS 2011.03"
+ bool "Sourcery CodeBench MIPS 2011.03"
depends on BR2_mips || BR2_mipsel
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the MIPS architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20.51, glibc 2.13, uClibc 0.9.30
- and gdb 7.2.50, kernel headers 2.6.38. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the MIPS architecture, from
+ Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51, glibc
+ 2.13, uClibc 0.9.30 and gdb 7.2.50, kernel headers
+ 2.6.38. It has support for the following variants:
- MIPS32 O32 big endian glibc
- MIPS32 O32 little endian glibc
- MIPS32 big endian soft float glibc
@@ -97,15 +97,15 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
- MIPS32 little endian soft float uclibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44
- bool "CodeSourcery MIPS 4.4"
+ bool "Sourcery CodeBench MIPS 4.4"
depends on BR2_mips || BR2_mipsel
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the MIPS architecture, from CodeSourcery. It
- uses gcc 4.4.1, binutils 2.19, glibc 2.11, uClibc 0.9.30 and
- gdb 7.0, kernel headers 2.6.32. It has support for the
- following variants:
+ Sourcery CodeBench toolchain for the MIPS architecture, from
+ Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc
+ 2.11, uClibc 0.9.30 and gdb 7.0, kernel headers 2.6.32. It
+ has support for the following variants:
- MIPS32 O32 big endian glibc
- MIPS32 O32 little endian glibc
- MIPS32 big endian soft float glibc
@@ -120,15 +120,15 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44
- MIPS32 little endian soft float uclibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
- bool "CodeSourcery PowerPC 2010.09"
+ bool "Sourcery CodeBench PowerPC 2010.09"
depends on BR2_powerpc
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the PowerPC architecture, from
- CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11,
- gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the PowerPC architecture,
+ from Sourcery CodeBench. It uses gcc 4.5.1, binutils 2.20,
+ glibc 2.11, gdb 7.2.50 and kernel headers 2.6.35.2. It has
+ support for the following variants:
- 603 glibc, 32 bits
- 603 soft float glibc, 32 bits
- e600 altivec glibc, 32 bits
@@ -138,37 +138,37 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
- 970 glibc hard-float, 64 bits
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
- bool "CodeSourcery SH 2011.03"
+ bool "Sourcery CodeBench SH 2011.03"
depends on BR2_sh4a || BR2_sh4aeb
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20, glibc 2.13, uClibc 0.9.30,
- gdb 7.2.50 and kernel headers 2.6.38. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
+ glibc 2.13, uClibc 0.9.30, gdb 7.2.50 and kernel headers
+ 2.6.38. It has support for the following variants:
- SH4A, glibc, little endian
- SH4A, glibc, big endian
- SH4A, uClibc, little endian
- SH4A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
- bool "CodeSourcery SH 2010.09"
+ bool "Sourcery CodeBench SH 2010.09"
depends on BR2_sh4a || BR2_sh4aeb
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.1, binutils 2.20, glibc 2.11, uClibc 0.9.30,
- gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
+ glibc 2.11, uClibc 0.9.30, gdb 7.2.50 and kernel headers
+ 2.6.35.2. It has support for the following variants:
- SH4A, glibc, little endian
- SH4A, glibc, big endian
- SH4A, uClibc, little endian
- SH4A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
- bool "CodeSourcery SH 2011.03"
+ bool "Sourcery CodeBench SH 2011.03"
depends on BR2_sh2a
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_LARGEFILE
@@ -177,14 +177,14 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and
- kernel headers 2.6.38. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
+ uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.38. It has
+ support for the following variants:
- SH2A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
- bool "CodeSourcery SH 2010.09"
+ bool "Sourcery CodeBench SH 2010.09"
depends on BR2_sh2a
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_LARGEFILE
@@ -193,22 +193,22 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.1, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and
- kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
+ uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.35.2. It
+ has support for the following variants:
- SH2A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009
- bool "CodeSourcery x86/x86_64 2010.09"
+ bool "Sourcery CodeBench x86/x86_64 2010.09"
depends on BR2_i386 || BR2_x86_64
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the x86/x86_64 architectures, from
- CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11,
- gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the x86/x86_64
+ architectures, from Mentor Graphics. It uses gcc 4.5.1,
+ binutils 2.20, glibc 2.11, gdb 7.2.50 and kernel headers
+ 2.6.35.2. It has support for the following variants:
- Intel Pentium 4, glibc, 32 bits
- Intel Atom, glibc, 32 bits
- Intel Xeon, glibc, 64 bits
^ permalink raw reply related
* [Buildroot] [git commit] ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09
From: Peter Korsgaard @ 2011-10-09 19:35 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=1459fc24c58edb589c4baf99c88b53af3b558f52
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/toolchain-external/Config.in | 16 ++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 3 +++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index c50acc8..9fbc224 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -199,6 +199,21 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
the following variants:
- SH2A, uClibc, big endian
+config BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009
+ bool "CodeSourcery x86/x86_64 2010.09"
+ depends on BR2_i386 || BR2_x86_64
+ select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+ select BR2_INSTALL_LIBSTDCPP
+ help
+ Toolchain for the x86/x86_64 architectures, from
+ CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11,
+ gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
+ the following variants:
+ - Intel Pentium 4, glibc, 32 bits
+ - Intel Atom, glibc, 32 bits
+ - Intel Xeon, glibc, 64 bits
+ - Intel Core 2, glibc, 64 bits
+
config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1
bool "Blackfin.uclinux.org 2010RC1"
depends on BR2_bfin
@@ -256,6 +271,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
+ default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && BR2_BFIN_FDPIC
default $(BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX) \
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 2662520..6e34e05 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -197,6 +197,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009),y)
+TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/ia32/portal/package7682/public/i686-pc-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE=ia32-2010.09-44-i686-pc-linux-gnu-i386-linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y)
TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/
TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2
^ permalink raw reply related
* [Buildroot] [git commit] ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03
From: Peter Korsgaard @ 2011-10-09 19:33 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=42c0fb4dc36ef2568fd89949c9699c4f3bf44048
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/toolchain-external/Config.in | 16 ++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 3 +++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index ac712ba..c50acc8 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -137,6 +137,21 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
- e500mc glibc, 32 bits
- 970 glibc hard-float, 64 bits
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
+ bool "CodeSourcery SH 2011.03"
+ depends on BR2_sh4a || BR2_sh4aeb
+ select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+ select BR2_INSTALL_LIBSTDCPP
+ help
+ Toolchain for the SuperH architecture, from CodeSourcery. It
+ uses gcc 4.5.2, binutils 2.20, glibc 2.13, uClibc 0.9.30,
+ gdb 7.2.50 and kernel headers 2.6.38. It has support for
+ the following variants:
+ - SH4A, glibc, little endian
+ - SH4A, glibc, big endian
+ - SH4A, uClibc, little endian
+ - SH4A, uClibc, big endian
+
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
bool "CodeSourcery SH 2010.09"
depends on BR2_sh4a || BR2_sh4aeb
@@ -238,6 +253,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
+ default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index c8a214d..2662520 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -188,6 +188,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-g
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7783/public/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
+TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/superh/portal/package8759/public/sh-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
^ permalink raw reply related
* [Buildroot] [git commit] ext-toolchain: Bump version of CodeSourcery MIPS 2011.03
From: Peter Korsgaard @ 2011-10-09 19:32 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=062288f17338251e28a84b7ae37bd8a31e8988d1
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/toolchain-external/ext-tool.mk | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 48c11eb..c8a214d 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -180,8 +180,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package7401/public/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103),y)
-TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package8715/public/mips-linux-gnu/
-TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-53-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
+TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package9055/public/mips-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-93-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/power/portal/package7703/public/powerpc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
^ permalink raw reply related
* [Buildroot] [git commit] ext-toolchain: Add CodeSourcery SH uClinux 2011.03
From: Peter Korsgaard @ 2011-10-09 19:32 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=ae2364676f6a0d5390142791b7cb4200dc55ad9e
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/toolchain-external/Config.in | 17 +++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 3 +++
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index b6fa9bd..ac712ba 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -152,6 +152,22 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
- SH4A, uClibc, little endian
- SH4A, uClibc, big endian
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
+ bool "CodeSourcery SH 2011.03"
+ depends on BR2_sh2a
+ select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
+ select BR2_LARGEFILE
+ select BR2_INET_RPC
+ select BR2_USE_WCHAR
+ select BR2_TOOLCHAIN_HAS_THREADS
+ select BR2_INSTALL_LIBSTDCPP
+ help
+ Toolchain for the SuperH architecture, from CodeSourcery. It
+ uses gcc 4.5.2, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and
+ kernel headers 2.6.38. It has support for
+ the following variants:
+ - SH2A, uClibc, big endian
+
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
bool "CodeSourcery SH 2010.09"
depends on BR2_sh2a
@@ -223,6 +239,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
+ default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && BR2_BFIN_FDPIC
default $(BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX) \
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index bac39cf..48c11eb 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -191,6 +191,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar.
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
+TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/
+TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y)
TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/
TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2
^ permalink raw reply related
* [Buildroot] [git commit] toolchain-external: allow specifying extra external libraries
From: Peter Korsgaard @ 2011-10-09 19:30 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=c72f54bba491a76e353c44c678258ac8029e2bdf
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Custom toolchains may provide extra libraries that need to be copied to the
target. This patch adds a configuration option for this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/toolchain-external/Config.in | 8 ++++++++
toolchain/toolchain-external/ext-tool.mk | 1 +
2 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index ff7e8db..b6fa9bd 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -322,6 +322,14 @@ config BR2_TOOLCHAIN_EXTERNAL_CXX
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
+config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
+ string "Extra toolchain libraries to be copied to target"
+ help
+ If your external toolchain provides extra libraries that
+ need to be copied to the target filesystem, enter them
+ here, separated by spaces. They will be copied to the
+ target's /lib directory.
+
endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM
endif # BR2_TOOLCHAIN_EXTERNAL
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index b9d932f..bac39cf 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -51,6 +51,7 @@
# of Buildroot is handled identical for the 2 toolchain types.
LIB_EXTERNAL_LIBS=ld*.so libc.so libcrypt.so libdl.so libgcc_s.so libm.so libnsl.so libresolv.so librt.so libutil.so
+LIB_EXTERNAL_LIBS+=$(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
LIB_EXTERNAL_LIBS+=libnss_files.so libnss_dns.so
endif
^ permalink raw reply related
* [Buildroot] [git commit] external toolchain: slightly optimize the copy of the toolchain sysroot
From: Peter Korsgaard @ 2011-10-09 19:24 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=2c23e937660f43131f68f6cbf2ff3fe3d0417032
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
The sysroot of an ARM CodeSourcery toolchain takes about 1.4 GB of
space, but 1.1+ GB of this space consists in locale-related
information which Buildroot doesn't use. By skipping the copy of those
unused files, we save quite a bit of time while importing the
toolchain sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
toolchain/helpers.mk | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk
index 4d90d15..7f3efaa 100644
--- a/toolchain/helpers.mk
+++ b/toolchain/helpers.mk
@@ -79,6 +79,9 @@ copy_toolchain_lib_root = \
# non-default architecture variant is used. Without this, the
# compiler fails to find libraries and headers.
#
+# Note that the 'locale' directories are not copied. They are huge
+# (400+MB) in CodeSourcery toolchains, and they are not really useful.
+#
# $1: main sysroot directory of the toolchain
# $2: arch specific sysroot directory of the toolchain
# $3: arch specific subdirectory in the sysroot
@@ -89,7 +92,7 @@ copy_toolchain_sysroot = \
ARCH_SUBDIR="$(strip $3)"; \
for i in etc lib sbin usr ; do \
if [ -d $${ARCH_SYSROOT_DIR}/$$i ] ; then \
- cp -a $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
+ rsync -au --exclude 'usr/lib/locale' $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
fi ; \
done ; \
if [ `readlink -f $${SYSROOT_DIR}` != `readlink -f $${ARCH_SYSROOT_DIR}` ] ; then \
^ permalink raw reply related
* [Buildroot] [PATCH 9/9] toolchain: speed up sysroot lib copying
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
From: Mike Frysinger <vapier@gentoo.org>
The copy_toolchain_lib_root helper searches the entire sysroot, but is
only interested in files in certain subdirs. So rather than waste time
in walking the entire tree, walk the few subdirs at the depth level we
are actually going to be poaching files from.
Some simplification suggested by Yann E. MORIN
<yann.morin.1998@anciens.enib.fr> and Arnout Vandecappelle
<arnout@mind.be>, added by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
---
toolchain/helpers.mk | 5 ++---
1 files changed, 2 insertions(+), 3 deletions(-)
diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk
index 7f3efaa..5585f45 100644
--- a/toolchain/helpers.mk
+++ b/toolchain/helpers.mk
@@ -22,9 +22,8 @@ copy_toolchain_lib_root = \
DESTDIR="$(strip $3)" ; \
\
LIBS=`(cd $${ARCH_SYSROOT_DIR}; \
- find -L . -path "./lib/$${LIB}.*" -o \
- -path "./usr/lib/$${LIB}.*" -o \
- -path "./usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/lib*/$${LIB}.*" \
+ find -L lib* usr/lib* usr/$(TOOLCHAIN_EXTERNAL_PREFIX)/lib* \
+ -maxdepth 1 -name "$${LIB}.*" 2>/dev/null \
)` ; \
for FILE in $${LIBS} ; do \
LIB=`basename $${FILE}`; \
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 8/9] external-toolchain: Slightly optimize toolchain extraction
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
Some CodeSourcery toolchains contain a huge number of locales that are
not useful, even though they account for 70-80% of the total toolchain
size. By skipping the extraction of those useless locales, we make the
toolchain extraction process slightly faster, and also make the output
directory size a lot smaller (host/opt/ is 213 MB instead of 1.5 GB
with a 2010.09 ARM CodeSourcery toolchain).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
toolchain/toolchain-external/ext-tool.mk | 3 ++-
1 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 6e34e05..8287916 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -250,7 +250,8 @@ $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE):
$(TOOLCHAIN_EXTERNAL_DIR)/.extracted: $(DL_DIR)/$(TOOLCHAIN_EXTERNAL_SOURCE)
mkdir -p $(@D)
- $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | $(TAR) $(TAR_STRIP_COMPONENTS)=1 -C $(@D) $(TAR_OPTIONS) -
+ $(INFLATE$(suffix $(TOOLCHAIN_EXTERNAL_SOURCE))) $^ | \
+ $(TAR) $(TAR_STRIP_COMPONENTS)=1 --exclude='usr/lib/locale/*' -C $(@D) $(TAR_OPTIONS) -
$(Q)touch $@
endif
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 7/9] ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
Now that CodeSourcery has been bought by Mentor Graphics, the
toolchains are named "Sourcery CodeBench". We rename the config short
description and adjust the help text, but we keep the option name in
order not to break existing configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/toolchain-external/Config.in | 130 ++++++++++++++++----------------
1 files changed, 65 insertions(+), 65 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index 9fbc224..0a4b922 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -4,85 +4,85 @@ choice
prompt "Toolchain"
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201103
- bool "CodeSourcery ARM 2011.03"
+ bool "Sourcery CodeBench ARM 2011.03"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20.51, glibc 2.13 and gdb 7.2.50,
- kernel headers 2.6.38. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51, glibc
+ 2.13 and gdb 7.2.50, kernel headers 2.6.38. It has support
+ for the following variants:
- ARMv5TE, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM201009
- bool "CodeSourcery ARM 2010.09"
+ bool "Sourcery CodeBench ARM 2010.09"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.5.1, binutils 2.20, glibc 2.11 and gdb 7.2.50,
- kernel headers 2.6.35.2. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.5.1, binutils 2.20, glibc
+ 2.11 and gdb 7.2.50, kernel headers 2.6.35.2. It has support
+ for the following variants:
- ARMv5TE, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2010Q1
- bool "CodeSourcery ARM 2010q1"
+ bool "Sourcery CodeBench ARM 2010q1"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.4.1, binutils 2.19, glibc 2.11, gdb 7.0.50 and
- kernel headers 2.6.32. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc
+ 2.11, gdb 7.0.50 and kernel headers 2.6.32. It has support
+ for the following variants:
- ARMv5T, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q3
- bool "CodeSourcery ARM 2009q3"
+ bool "Sourcery CodeBench ARM 2009q3"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.4.1, binutils 2.19, glibc 2.10 and gdb 6.8 and
- kernel headers 2.6.30. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc
+ 2.10 and gdb 6.8 and kernel headers 2.6.30. It has support
+ for the following variants:
- ARMv5T, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM2009Q1
- bool "CodeSourcery ARM 2009q1"
+ bool "Sourcery CodeBench ARM 2009q1"
depends on BR2_arm
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the ARM architecture, from CodeSourcery. It
- uses gcc 4.3.3, binutils 2.19, glibc 2.8 and gdb 6.8 and
- kernel headers 2.6.30. It has support for the following
- variants:
+ Sourcery CodeBench toolchain for the ARM architecture, from
+ Mentor Graphics. It uses gcc 4.3.3, binutils 2.19, glibc 2.8
+ and gdb 6.8 and kernel headers 2.6.30. It has support for
+ the following variants:
- ARMv5T, little endian, soft-float, glibc
- ARMv4T, little endian, soft-float, glibc
- ARMv7-A, Thumb 2, little endian, soft-float, glibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
- bool "CodeSourcery MIPS 2011.03"
+ bool "Sourcery CodeBench MIPS 2011.03"
depends on BR2_mips || BR2_mipsel
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the MIPS architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20.51, glibc 2.13, uClibc 0.9.30
- and gdb 7.2.50, kernel headers 2.6.38. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the MIPS architecture, from
+ Mentor Graphics. It uses gcc 4.5.2, binutils 2.20.51, glibc
+ 2.13, uClibc 0.9.30 and gdb 7.2.50, kernel headers
+ 2.6.38. It has support for the following variants:
- MIPS32 O32 big endian glibc
- MIPS32 O32 little endian glibc
- MIPS32 big endian soft float glibc
@@ -97,15 +97,15 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
- MIPS32 little endian soft float uclibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44
- bool "CodeSourcery MIPS 4.4"
+ bool "Sourcery CodeBench MIPS 4.4"
depends on BR2_mips || BR2_mipsel
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the MIPS architecture, from CodeSourcery. It
- uses gcc 4.4.1, binutils 2.19, glibc 2.11, uClibc 0.9.30 and
- gdb 7.0, kernel headers 2.6.32. It has support for the
- following variants:
+ Sourcery CodeBench toolchain for the MIPS architecture, from
+ Mentor Graphics. It uses gcc 4.4.1, binutils 2.19, glibc
+ 2.11, uClibc 0.9.30 and gdb 7.0, kernel headers 2.6.32. It
+ has support for the following variants:
- MIPS32 O32 big endian glibc
- MIPS32 O32 little endian glibc
- MIPS32 big endian soft float glibc
@@ -120,15 +120,15 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44
- MIPS32 little endian soft float uclibc
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
- bool "CodeSourcery PowerPC 2010.09"
+ bool "Sourcery CodeBench PowerPC 2010.09"
depends on BR2_powerpc
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the PowerPC architecture, from
- CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11,
- gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the PowerPC architecture,
+ from Sourcery CodeBench. It uses gcc 4.5.1, binutils 2.20,
+ glibc 2.11, gdb 7.2.50 and kernel headers 2.6.35.2. It has
+ support for the following variants:
- 603 glibc, 32 bits
- 603 soft float glibc, 32 bits
- e600 altivec glibc, 32 bits
@@ -138,37 +138,37 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
- 970 glibc hard-float, 64 bits
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
- bool "CodeSourcery SH 2011.03"
+ bool "Sourcery CodeBench SH 2011.03"
depends on BR2_sh4a || BR2_sh4aeb
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20, glibc 2.13, uClibc 0.9.30,
- gdb 7.2.50 and kernel headers 2.6.38. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
+ glibc 2.13, uClibc 0.9.30, gdb 7.2.50 and kernel headers
+ 2.6.38. It has support for the following variants:
- SH4A, glibc, little endian
- SH4A, glibc, big endian
- SH4A, uClibc, little endian
- SH4A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
- bool "CodeSourcery SH 2010.09"
+ bool "Sourcery CodeBench SH 2010.09"
depends on BR2_sh4a || BR2_sh4aeb
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.1, binutils 2.20, glibc 2.11, uClibc 0.9.30,
- gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
+ glibc 2.11, uClibc 0.9.30, gdb 7.2.50 and kernel headers
+ 2.6.35.2. It has support for the following variants:
- SH4A, glibc, little endian
- SH4A, glibc, big endian
- SH4A, uClibc, little endian
- SH4A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
- bool "CodeSourcery SH 2011.03"
+ bool "Sourcery CodeBench SH 2011.03"
depends on BR2_sh2a
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_LARGEFILE
@@ -177,14 +177,14 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.2, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and
- kernel headers 2.6.38. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
+ uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.38. It has
+ support for the following variants:
- SH2A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
- bool "CodeSourcery SH 2010.09"
+ bool "Sourcery CodeBench SH 2010.09"
depends on BR2_sh2a
select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
select BR2_LARGEFILE
@@ -193,22 +193,22 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
select BR2_TOOLCHAIN_HAS_THREADS
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the SuperH architecture, from CodeSourcery. It
- uses gcc 4.5.1, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and
- kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the SuperH architecture,
+ from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
+ uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.35.2. It
+ has support for the following variants:
- SH2A, uClibc, big endian
config BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009
- bool "CodeSourcery x86/x86_64 2010.09"
+ bool "Sourcery CodeBench x86/x86_64 2010.09"
depends on BR2_i386 || BR2_x86_64
select BR2_TOOLCHAIN_EXTERNAL_GLIBC
select BR2_INSTALL_LIBSTDCPP
help
- Toolchain for the x86/x86_64 architectures, from
- CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11,
- gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
- the following variants:
+ Sourcery CodeBench toolchain for the x86/x86_64
+ architectures, from Mentor Graphics. It uses gcc 4.5.1,
+ binutils 2.20, glibc 2.11, gdb 7.2.50 and kernel headers
+ 2.6.35.2. It has support for the following variants:
- Intel Pentium 4, glibc, 32 bits
- Intel Atom, glibc, 32 bits
- Intel Xeon, glibc, 64 bits
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 6/9] ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/toolchain-external/Config.in | 16 ++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 3 +++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index c50acc8..9fbc224 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -199,6 +199,21 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
the following variants:
- SH2A, uClibc, big endian
+config BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009
+ bool "CodeSourcery x86/x86_64 2010.09"
+ depends on BR2_i386 || BR2_x86_64
+ select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+ select BR2_INSTALL_LIBSTDCPP
+ help
+ Toolchain for the x86/x86_64 architectures, from
+ CodeSourcery. It uses gcc 4.5.1, binutils 2.20, glibc 2.11,
+ gdb 7.2.50 and kernel headers 2.6.35.2. It has support for
+ the following variants:
+ - Intel Pentium 4, glibc, 32 bits
+ - Intel Atom, glibc, 32 bits
+ - Intel Xeon, glibc, 64 bits
+ - Intel Core 2, glibc, 64 bits
+
config BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1
bool "Blackfin.uclinux.org 2010RC1"
depends on BR2_bfin
@@ -256,6 +271,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
+ default "i686-pc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && BR2_BFIN_FDPIC
default $(BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX) \
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 2662520..6e34e05 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -197,6 +197,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOUCERY_X86_201009),y)
+TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/ia32/portal/package7682/public/i686-pc-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE=ia32-2010.09-44-i686-pc-linux-gnu-i386-linux.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y)
TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/
TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 5/9] ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/toolchain-external/Config.in | 16 ++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 3 +++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index ac712ba..c50acc8 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -137,6 +137,21 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
- e500mc glibc, 32 bits
- 970 glibc hard-float, 64 bits
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
+ bool "CodeSourcery SH 2011.03"
+ depends on BR2_sh4a || BR2_sh4aeb
+ select BR2_TOOLCHAIN_EXTERNAL_GLIBC
+ select BR2_INSTALL_LIBSTDCPP
+ help
+ Toolchain for the SuperH architecture, from CodeSourcery. It
+ uses gcc 4.5.2, binutils 2.20, glibc 2.13, uClibc 0.9.30,
+ gdb 7.2.50 and kernel headers 2.6.38. It has support for
+ the following variants:
+ - SH4A, glibc, little endian
+ - SH4A, glibc, big endian
+ - SH4A, uClibc, little endian
+ - SH4A, uClibc, big endian
+
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
bool "CodeSourcery SH 2010.09"
depends on BR2_sh4a || BR2_sh4aeb
@@ -238,6 +253,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "mips-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
+ default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index c8a214d..2662520 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -188,6 +188,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-g
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7783/public/sh-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103),y)
+TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/sgpp/lite/superh/portal/package8759/public/sh-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-37-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 4/9] ext-toolchain: Bump version of CodeSourcery MIPS 2011.03
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/toolchain-external/ext-tool.mk | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index 48c11eb..c8a214d 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -180,8 +180,8 @@ else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS44),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package7401/public/mips-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=mips-4.4-303-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_MIPS201103),y)
-TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package8715/public/mips-linux-gnu/
-TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-53-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
+TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/mips/portal/package9055/public/mips-linux-gnu/
+TOOLCHAIN_EXTERNAL_SOURCE=mips-2011.03-93-mips-linux-gnu-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/power/portal/package7703/public/powerpc-linux-gnu/
TOOLCHAIN_EXTERNAL_SOURCE=freescale-2010.09-55-powerpc-linux-gnu-i686-pc-linux-gnu.tar.bz2
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 3/9] ext-toolchain: Add CodeSourcery SH uClinux 2011.03
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/toolchain-external/Config.in | 17 +++++++++++++++++
toolchain/toolchain-external/ext-tool.mk | 3 +++
2 files changed, 20 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index b6fa9bd..ac712ba 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -152,6 +152,22 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
- SH4A, uClibc, little endian
- SH4A, uClibc, big endian
+config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
+ bool "CodeSourcery SH 2011.03"
+ depends on BR2_sh2a
+ select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
+ select BR2_LARGEFILE
+ select BR2_INET_RPC
+ select BR2_USE_WCHAR
+ select BR2_TOOLCHAIN_HAS_THREADS
+ select BR2_INSTALL_LIBSTDCPP
+ help
+ Toolchain for the SuperH architecture, from CodeSourcery. It
+ uses gcc 4.5.2, binutils 2.20, uClibc 0.9.30, gdb 7.2.50 and
+ kernel headers 2.6.38. It has support for
+ the following variants:
+ - SH2A, uClibc, big endian
+
config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
bool "CodeSourcery SH 2010.09"
depends on BR2_sh2a
@@ -223,6 +239,7 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
default "powerpc-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_POWERPC201009
default "sh-linux-gnu" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201009
default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
+ default "sh-uclinux" if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
default "bfin-uclinux" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && !BR2_BFIN_FDPIC
default "bfin-linux-uclibc" if BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1 && BR2_BFIN_FDPIC
default $(BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX) \
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index bac39cf..48c11eb 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -191,6 +191,9 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-45-sh-linux-gnu-i686-pc-linux-gnu.tar.
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package7859/public/sh-uclinux/
TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
+TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/sgpp/lite/superh/portal/package8749/public/sh-uclinux/
+TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX_2010RC1),y)
TOOLCHAIN_EXTERNAL_SITE_1 = http://blackfin.uclinux.org/gf/download/frsrelease/501/8378/
TOOLCHAIN_EXTERNAL_SOURCE_1 = blackfin-toolchain-2010R1-RC4.i386.tar.bz2
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 2/9] toolchain-external: allow specifying extra external libraries
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
From: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Custom toolchains may provide extra libraries that need to be copied to the
target. This patch adds a configuration option for this.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/toolchain-external/Config.in | 8 ++++++++
toolchain/toolchain-external/ext-tool.mk | 1 +
2 files changed, 9 insertions(+), 0 deletions(-)
diff --git a/toolchain/toolchain-external/Config.in b/toolchain/toolchain-external/Config.in
index ff7e8db..b6fa9bd 100644
--- a/toolchain/toolchain-external/Config.in
+++ b/toolchain/toolchain-external/Config.in
@@ -322,6 +322,14 @@ config BR2_TOOLCHAIN_EXTERNAL_CXX
support. If you don't know, leave the default value,
Buildroot will tell you if it's correct or not.
+config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
+ string "Extra toolchain libraries to be copied to target"
+ help
+ If your external toolchain provides extra libraries that
+ need to be copied to the target filesystem, enter them
+ here, separated by spaces. They will be copied to the
+ target's /lib directory.
+
endif # BR2_TOOLCHAIN_EXTERNAL_CUSTOM
endif # BR2_TOOLCHAIN_EXTERNAL
diff --git a/toolchain/toolchain-external/ext-tool.mk b/toolchain/toolchain-external/ext-tool.mk
index b9d932f..bac39cf 100644
--- a/toolchain/toolchain-external/ext-tool.mk
+++ b/toolchain/toolchain-external/ext-tool.mk
@@ -51,6 +51,7 @@
# of Buildroot is handled identical for the 2 toolchain types.
LIB_EXTERNAL_LIBS=ld*.so libc.so libcrypt.so libdl.so libgcc_s.so libm.so libnsl.so libresolv.so librt.so libutil.so
+LIB_EXTERNAL_LIBS+=$(call qstrip,$(BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS))
ifeq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC),y)
LIB_EXTERNAL_LIBS+=libnss_files.so libnss_dns.so
endif
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 1/9] external toolchain: slightly optimize the copy of the toolchain sysroot
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318182187.git.thomas.petazzoni@free-electrons.com>
The sysroot of an ARM CodeSourcery toolchain takes about 1.4 GB of
space, but 1.1+ GB of this space consists in locale-related
information which Buildroot doesn't use. By skipping the copy of those
unused files, we save quite a bit of time while importing the
toolchain sysroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
---
toolchain/helpers.mk | 5 ++++-
1 files changed, 4 insertions(+), 1 deletions(-)
diff --git a/toolchain/helpers.mk b/toolchain/helpers.mk
index 4d90d15..7f3efaa 100644
--- a/toolchain/helpers.mk
+++ b/toolchain/helpers.mk
@@ -79,6 +79,9 @@ copy_toolchain_lib_root = \
# non-default architecture variant is used. Without this, the
# compiler fails to find libraries and headers.
#
+# Note that the 'locale' directories are not copied. They are huge
+# (400+MB) in CodeSourcery toolchains, and they are not really useful.
+#
# $1: main sysroot directory of the toolchain
# $2: arch specific sysroot directory of the toolchain
# $3: arch specific subdirectory in the sysroot
@@ -89,7 +92,7 @@ copy_toolchain_sysroot = \
ARCH_SUBDIR="$(strip $3)"; \
for i in etc lib sbin usr ; do \
if [ -d $${ARCH_SYSROOT_DIR}/$$i ] ; then \
- cp -a $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
+ rsync -au --exclude 'usr/lib/locale' $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
fi ; \
done ; \
if [ `readlink -f $${SYSROOT_DIR}` != `readlink -f $${ARCH_SYSROOT_DIR}` ] ; then \
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [pull request v2] Pull request for branch for-2011.11/ext-toolchain-updates
From: Thomas Petazzoni @ 2011-10-09 17:44 UTC (permalink / raw)
To: buildroot
Hello,
Changes since the last posting:
* Add Acked-by and Reviewed-by tags as given by Yann E. Morin (thanks!)
* Include comments made by Yann and Arnout on patches 8/9 and 9/9.
Thomas
The following changes since commit ddb8c639c312fd9f65dbb123837c100281495d50:
libplayer: mark python bindings as broken (2011-10-08 22:39:29 +0200)
are available in the git repository at:
http://free-electrons.com/~thomas/buildroot.git for-2011.11/ext-toolchain-updates
Mike Frysinger (1):
toolchain: speed up sysroot lib copying
Thomas De Schampheleire (1):
toolchain-external: allow specifying extra external libraries
Thomas Petazzoni (7):
external toolchain: slightly optimize the copy of the toolchain sysroot
ext-toolchain: Add CodeSourcery SH uClinux 2011.03
ext-toolchain: Bump version of CodeSourcery MIPS 2011.03
ext-toolchain: Add CodeSourcery SH GNU/Linux 2011.03
ext-toolchain: Add CodeSoucery x86 GNU/Linux 2010.09
ext-toolchain: Take into account Mentor Graphics acquisition of CodeSoucery
external-toolchain: Slightly optimize toolchain extraction
toolchain/helpers.mk | 10 +-
toolchain/toolchain-external/Config.in | 157 ++++++++++++++++++++----------
toolchain/toolchain-external/ext-tool.mk | 17 +++-
3 files changed, 127 insertions(+), 57 deletions(-)
Thanks,
--
Thomas Petazzoni
^ permalink raw reply
* [Buildroot] [PATCH 2/2] graph-build-time: generate graphs based on timing data
From: Thomas Petazzoni @ 2011-10-09 16:17 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318176666.git.thomas.petazzoni@free-electrons.com>
This script generates graphs of packages build time, from the timing
data generated by Buildroot in the $(O)/build-time.data file.
Example usage:
cat $(O)/build-time.data | \
./support/scripts/graph-build-time \
--type=histogram --output=foobar.pdf
Three graph types are available :
* histogram, which creates an histogram of the build time for each
package, decomposed by each step (extract, patch, configure,
etc.). The order in which the packages are shown is
configurable: by build order, or by duration order. See the
--order option.
* pie-packages, which creates a pie chart of the build time of
each package (without decomposition in steps). Packages that
contributed to less than 1% of the overall build time are all
grouped together in an "Other" entry.
* pie-steps, which creates a pie chart of the time spent globally
on each step (extract, patch, configure, etc...)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
support/scripts/graph-build-time | 252 ++++++++++++++++++++++++++++++++++++++
1 files changed, 252 insertions(+), 0 deletions(-)
create mode 100755 support/scripts/graph-build-time
diff --git a/support/scripts/graph-build-time b/support/scripts/graph-build-time
new file mode 100755
index 0000000..7fde852
--- /dev/null
+++ b/support/scripts/graph-build-time
@@ -0,0 +1,252 @@
+#!/usr/bin/env python
+
+# Copyright (C) 2011 by Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+# This script generates graphs of packages build time, from the timing
+# data generated by Buildroot in the $(O)/build-time.data file.
+#
+# Example usage:
+#
+# cat $(O)/build-time.data | ./support/scripts/graph-build-time --type=histogram --output=foobar.pdf
+#
+# Three graph types are available :
+#
+# * histogram, which creates an histogram of the build time for each
+# package, decomposed by each step (extract, patch, configure,
+# etc.). The order in which the packages are shown is
+# configurable: by build order, or by duration order. See the
+# --order option.
+#
+# * pie-packages, which creates a pie chart of the build time of
+# each package (without decomposition in steps). Packages that
+# contributed to less than 1% of the overall build time are all
+# grouped together in an "Other" entry.
+#
+# * pie-steps, which creates a pie chart of the time spent globally
+# on each step (extract, patch, configure, etc...)
+#
+# Requirements:
+#
+# * matplotlib (python-matplotlib on Debian/Ubuntu systems)
+# * numpy (python-numpy on Debian/Ubuntu systems)
+# * argparse (by default in Python 2.7, requires python-argparse if
+# Python 2.6 is used)
+
+import matplotlib
+import numpy
+matplotlib.use('PDF')
+
+import matplotlib.pyplot as plt
+import matplotlib.font_manager as fm
+import csv
+import argparse
+import sys
+
+steps = [ 'extract', 'patch', 'configure', 'build',
+ 'install-target', 'install-host', 'install-images',
+ 'install-staging' ]
+
+histogram_colors = ['#e60004', '#009836', '#2e1d86', '#ffed00',
+ '#0068b5', '#f28e00', '#940084', '#97c000',
+ '#00469b', '#f9c000' ]
+
+class Package:
+ def __init__(self, name):
+ self.name = name
+ self.steps_duration = {}
+ self.duration = 0
+
+ def add_step(self, step, duration):
+ self.steps_duration[step] = duration
+ self.duration += duration
+
+ def get_duration(self, step):
+ if self.steps_duration.has_key(step):
+ return self.steps_duration[step]
+ else:
+ return 0
+
+# Generate an histogram of the time spent in each step of each
+# package.
+def pkg_histogram(data, output, order="build"):
+ n_pkgs = len(data)
+ ind = numpy.arange(n_pkgs)
+
+ if order == "duration":
+ data = sorted(data, key=lambda p: p.duration, reverse=True)
+
+ # Prepare the vals array, containing one entry for each step
+ vals = []
+ for step in steps:
+ val = []
+ for p in data:
+ val.append(p.get_duration(step))
+ vals.append(val)
+
+ bottom = [0] * n_pkgs
+ legenditems = []
+
+ plt.figure()
+
+ # Draw the bars, step by step
+ for i in range(0, len(vals)):
+ b = plt.bar(ind, vals[i], 1, color=histogram_colors[i], bottom=bottom, linewidth=0)
+ legenditems.append(b[0])
+ bottom = [ bottom[j] + vals[i][j] for j in range(0, len(vals[i])) ]
+
+ # Draw the package names
+ plt.xticks(ind + .5, [ p.name for p in data ], rotation=90, fontsize=4)
+
+ # Adjust size of graph (double the width)
+ sz = plt.gcf().get_size_inches()
+ plt.gcf().set_size_inches(sz[0] * 2, sz[1])
+
+ # Add more space for the package names at the bottom
+ plt.gcf().subplots_adjust(bottom=0.2)
+
+ # Remove ticks in the graph for each package
+ axes = plt.gcf().gca()
+ for line in axes.get_xticklines():
+ line.set_markersize(0)
+
+ axes.set_ylabel('Time (seconds)')
+
+ # Reduce size of legend text
+ leg_prop = fm.FontProperties(size=6)
+
+ # Draw legend
+ plt.legend(legenditems, steps, prop=leg_prop)
+
+ if order == "build":
+ plt.title('Build time of packages, by build order')
+ elif order == "duration":
+ plt.title('Build time of packages, by duration order')
+
+ # Save graph
+ plt.savefig(output)
+
+# Generate a pie chart with the time spent building each package.
+def pkg_pie_time_per_package(data, output):
+ # Compute total build duration
+ total = 0
+ for p in data:
+ total += p.duration
+
+ # Build the list of labels and values, and filter the packages
+ # that account for less than 1% of the build time.
+ labels = []
+ values = []
+ other_value = 0
+ for p in data:
+ if p.duration < (total * 0.01):
+ other_value += p.duration
+ else:
+ labels.append(p.name)
+ values.append(p.duration)
+
+ labels.append('Other')
+ values.append(other_value)
+
+ plt.figure()
+
+ # Draw pie graph
+ patches, texts, autotexts = plt.pie(values, labels=labels, autopct='%1.1f%%', shadow=True)
+
+ # Reduce text size
+ proptease = fm.FontProperties()
+ proptease.set_size('xx-small')
+ plt.setp(autotexts, fontproperties=proptease)
+ plt.setp(texts, fontproperties=proptease)
+
+ plt.title('Build time per package')
+ plt.savefig(output)
+
+# Generate a pie chart with a portion for the overall time spent in
+# each step for all packages.
+def pkg_pie_time_per_step(data, output):
+ steps_values = []
+ for step in steps:
+ val = 0
+ for p in data:
+ val += p.get_duration(step)
+ steps_values.append(val)
+
+ plt.figure()
+
+ # Draw pie graph
+ patches, texts, autotexts = plt.pie(steps_values, labels=steps,
+ autopct='%1.1f%%', shadow=True)
+
+ # Reduce text size
+ proptease = fm.FontProperties()
+ proptease.set_size('xx-small')
+ plt.setp(autotexts, fontproperties=proptease)
+ plt.setp(texts, fontproperties=proptease)
+
+ plt.title('Build time per step')
+ plt.savefig(output)
+
+# Parses the csv file passed on standard input and returns a list of
+# Package objects, filed with the duration of each step and the total
+# duration of the package.
+def read_data():
+ reader = csv.reader(sys.stdin, delimiter=',')
+ pkgs = []
+
+ # Auxilliary function to find a package by name in the list.
+ def getpkg(name):
+ for p in pkgs:
+ if p.name == name:
+ return p
+ return None
+
+ for row in reader:
+ pkg = row[0]
+ step = row[1]
+ duration = float(row[2]) / 1000.
+
+ p = getpkg(pkg)
+ if p is None:
+ p = Package(pkg)
+ pkgs.append(p)
+
+ p.add_step(step, duration)
+
+ return pkgs
+
+parser = argparse.ArgumentParser(description='Draw build time graphs')
+parser.add_argument("--type", metavar="GRAPH_TYPE", required=True,
+ help="Type of graph (histogram, pie-packages, pie-steps)")
+parser.add_argument("--order", metavar="GRAPH_ORDER",
+ help="Ordering of packages: build or duration (for histogram only)")
+parser.add_argument("--output", metavar="OUTPUT", required=True,
+ help="Output file (PDF extension)")
+args = parser.parse_args()
+
+d = read_data()
+
+if args.type == "histogram":
+ if args.order == "build" or args.order == "duration":
+ pkg_histogram(d, args.output, args.order)
+ else:
+ print "Unknown graph order"
+ sys.exit(1)
+elif args.type == "pie-packages":
+ pkg_pie_time_per_package(d, args.output)
+elif args.type == "pie-steps":
+ pkg_pie_time_per_step(d, args.output)
+
--
1.7.4.1
^ permalink raw reply related
* [Buildroot] [PATCH 1/2] package: instrument to gather timing data
From: Thomas Petazzoni @ 2011-10-09 16:17 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1318176666.git.thomas.petazzoni@free-electrons.com>
Instrument the package infrastructure to generate a
$(O)/build-time.data file which contains one line for each step of
each package and the corresponding duration in milliseconds.
The instrumentation is not perfect yet, as it doesn't account for
packages with overriden source directory and the build-time.data is
never removed, so results will accumulate if several partial builds
are done.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
package/Makefile.package.in | 28 ++++++++++++++++++++++++++++
1 files changed, 28 insertions(+), 0 deletions(-)
diff --git a/package/Makefile.package.in b/package/Makefile.package.in
index b5ef57b..605b518 100644
--- a/package/Makefile.package.in
+++ b/package/Makefile.package.in
@@ -254,6 +254,18 @@ define sep
endef
+define savetime
+ echo $$(($$(date +%s%N)/1000000)) > $(O)/.br.time
+endef
+
+define outputtime
+ newtime=`echo $$(($$(date +%s%N)/1000000))` ; \
+ oldtime=`cat $(O)/.br.time` ; \
+ rm -f .br.time ; \
+ timediff=$$(($$newtime-$$oldtime)) ; \
+ echo "$(1),$(2),$$timediff" >> $(O)/build-time.data
+endef
+
################################################################################
# Implicit targets -- produce a stamp file for each step of a package build
################################################################################
@@ -278,10 +290,12 @@ endif
$(BUILD_DIR)/%/.stamp_extracted:
@$(call MESSAGE,"Extracting")
$(Q)mkdir -p $(@D)
+ $(call savetime)
$($(PKG)_EXTRACT_CMDS)
# some packages have messed up permissions inside
$(Q)chmod -R +rw $(@D)
$(foreach hook,$($(PKG)_POST_EXTRACT_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),extract)
$(Q)touch $@
# Rsync the source directory if the <pkg>_OVERRIDE_SRCDIR feature is
@@ -311,6 +325,7 @@ endif
$(BUILD_DIR)/%/.stamp_patched: NAMEVER = $(RAWNAME)-$($(PKG)_VERSION)
$(BUILD_DIR)/%/.stamp_patched:
@$(call MESSAGE,"Patching $($(PKG)_DIR_PREFIX)/$(RAWNAME)")
+ $(call savetime)
$(foreach hook,$($(PKG)_PRE_PATCH_HOOKS),$(call $(hook))$(sep))
$(if $($(PKG)_PATCH),support/scripts/apply-patches.sh $(@D) $(DL_DIR) $($(PKG)_PATCH))
$(Q)( \
@@ -326,49 +341,62 @@ $(BUILD_DIR)/%/.stamp_patched:
fi; \
)
$(foreach hook,$($(PKG)_POST_PATCH_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),patch)
$(Q)touch $@
# Configure
$(BUILD_DIR)/%/.stamp_configured:
+ $(call savetime)
$(foreach hook,$($(PKG)_PRE_CONFIGURE_HOOKS),$(call $(hook))$(sep))
@$(call MESSAGE,"Configuring")
$($(PKG)_CONFIGURE_CMDS)
$(foreach hook,$($(PKG)_POST_CONFIGURE_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),configure)
$(Q)touch $@
# Build
$(BUILD_DIR)/%/.stamp_built::
@$(call MESSAGE,"Building")
+ $(call savetime)
$($(PKG)_BUILD_CMDS)
$(foreach hook,$($(PKG)_POST_BUILD_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),build)
$(Q)touch $@
# Install to host dir
$(BUILD_DIR)/%/.stamp_host_installed:
@$(call MESSAGE,"Installing to host directory")
+ $(call savetime)
$($(PKG)_INSTALL_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),install-host)
$(Q)touch $@
# Install to staging dir
$(BUILD_DIR)/%/.stamp_staging_installed:
@$(call MESSAGE,"Installing to staging directory")
+ $(call savetime)
$($(PKG)_INSTALL_STAGING_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_STAGING_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),install-staging)
$(Q)touch $@
# Install to images dir
$(BUILD_DIR)/%/.stamp_images_installed:
@$(call MESSAGE,"Installing to images directory")
+ $(call savetime)
$($(PKG)_INSTALL_IMAGES_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_IMAGES_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),install-images)
$(Q)touch $@
# Install to target dir
$(BUILD_DIR)/%/.stamp_target_installed:
@$(call MESSAGE,"Installing to target")
+ $(call savetime)
$($(PKG)_INSTALL_TARGET_CMDS)
$(foreach hook,$($(PKG)_POST_INSTALL_TARGET_HOOKS),$(call $(hook))$(sep))
+ $(call outputtime,$($(PKG)_NAME),install-target)
$(Q)touch $@
# Clean package
--
1.7.4.1
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox