* [Buildroot] [autobuild.buildroot.net] Build results for 2012-11-21
From: Thomas Petazzoni @ 2012-11-22 7:34 UTC (permalink / raw)
To: buildroot
Hello,
On 2012-11-21, 138 random build tests have been done and
submitted on autobuild.buildroot.net.
94 builds have been successful
44 builds have failed
Below the results of the failed builds. Successful builds are omitted.
Build 8fe6ad8f1d9d8d0e9c11d585f3d002404a6ba3f9
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : xtensa
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 00:55:56
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/8fe6ad8f1d9d8d0e9c11d585f3d002404a6ba3f9/build-end.log
Complete log : http://autobuild.buildroot.net/results/8fe6ad8f1d9d8d0e9c11d585f3d002404a6ba3f9/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8fe6ad8f1d9d8d0e9c11d585f3d002404a6ba3f9/config
Defconfig : http://autobuild.buildroot.net/results/8fe6ad8f1d9d8d0e9c11d585f3d002404a6ba3f9/defconfig
Build 311ccf2ecfbe4f48e45fa69a3da8c0f5c7ff2c15
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 00:59:05
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/311ccf2ecfbe4f48e45fa69a3da8c0f5c7ff2c15/build-end.log
Complete log : http://autobuild.buildroot.net/results/311ccf2ecfbe4f48e45fa69a3da8c0f5c7ff2c15/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/311ccf2ecfbe4f48e45fa69a3da8c0f5c7ff2c15/config
Defconfig : http://autobuild.buildroot.net/results/311ccf2ecfbe4f48e45fa69a3da8c0f5c7ff2c15/defconfig
Build 18750621e6fc22172638e5484663bfad694e0292
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : xtensa
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 01:03:56
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/18750621e6fc22172638e5484663bfad694e0292/build-end.log
Complete log : http://autobuild.buildroot.net/results/18750621e6fc22172638e5484663bfad694e0292/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/18750621e6fc22172638e5484663bfad694e0292/config
Defconfig : http://autobuild.buildroot.net/results/18750621e6fc22172638e5484663bfad694e0292/defconfig
Build 082915aa939844979e6fc7c61180d478fcf486d5
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 01:37:03
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/082915aa939844979e6fc7c61180d478fcf486d5/build-end.log
Complete log : http://autobuild.buildroot.net/results/082915aa939844979e6fc7c61180d478fcf486d5/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/082915aa939844979e6fc7c61180d478fcf486d5/config
Defconfig : http://autobuild.buildroot.net/results/082915aa939844979e6fc7c61180d478fcf486d5/defconfig
Build c89d294046eb52e7b345679e5d6162ee6b59113d
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 01:55:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/c89d294046eb52e7b345679e5d6162ee6b59113d/build-end.log
Complete log : http://autobuild.buildroot.net/results/c89d294046eb52e7b345679e5d6162ee6b59113d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/c89d294046eb52e7b345679e5d6162ee6b59113d/config
Defconfig : http://autobuild.buildroot.net/results/c89d294046eb52e7b345679e5d6162ee6b59113d/defconfig
Build d4a05c7a200b757d6f04e213be5d80a37339eaae
==============================================
Status : NOK
Failure reason : lcdproc-0.5.6
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 02:08:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/d4a05c7a200b757d6f04e213be5d80a37339eaae/build-end.log
Complete log : http://autobuild.buildroot.net/results/d4a05c7a200b757d6f04e213be5d80a37339eaae/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/d4a05c7a200b757d6f04e213be5d80a37339eaae/config
Defconfig : http://autobuild.buildroot.net/results/d4a05c7a200b757d6f04e213be5d80a37339eaae/defconfig
Build 6475e03666187c20b874194ec4e9f7b25d04d0d3
==============================================
Status : NOK
Failure reason : libnss-3.12.9
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 02:18:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/6475e03666187c20b874194ec4e9f7b25d04d0d3/build-end.log
Complete log : http://autobuild.buildroot.net/results/6475e03666187c20b874194ec4e9f7b25d04d0d3/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6475e03666187c20b874194ec4e9f7b25d04d0d3/config
Defconfig : http://autobuild.buildroot.net/results/6475e03666187c20b874194ec4e9f7b25d04d0d3/defconfig
Build 50f7c6fcdadbc2c80ae4e0346a4eaeb05652bfd2
==============================================
Status : NOK
Failure reason : sconeserver-180
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 03:14:24
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/50f7c6fcdadbc2c80ae4e0346a4eaeb05652bfd2/build-end.log
Complete log : http://autobuild.buildroot.net/results/50f7c6fcdadbc2c80ae4e0346a4eaeb05652bfd2/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/50f7c6fcdadbc2c80ae4e0346a4eaeb05652bfd2/config
Defconfig : http://autobuild.buildroot.net/results/50f7c6fcdadbc2c80ae4e0346a4eaeb05652bfd2/defconfig
Build a7b55a7382e6b37c89e4393bd17b4047ed5cce15
==============================================
Status : NOK
Failure reason : ltp-testsuite-20101031
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 06:03:00
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/a7b55a7382e6b37c89e4393bd17b4047ed5cce15/build-end.log
Complete log : http://autobuild.buildroot.net/results/a7b55a7382e6b37c89e4393bd17b4047ed5cce15/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a7b55a7382e6b37c89e4393bd17b4047ed5cce15/config
Defconfig : http://autobuild.buildroot.net/results/a7b55a7382e6b37c89e4393bd17b4047ed5cce15/defconfig
Build 0ac4860319240fbb8bcfd6489ef952897852d85f
==============================================
Status : NOK
Failure reason : gpsd-3.7
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 06:11:40
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/0ac4860319240fbb8bcfd6489ef952897852d85f/build-end.log
Complete log : http://autobuild.buildroot.net/results/0ac4860319240fbb8bcfd6489ef952897852d85f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/0ac4860319240fbb8bcfd6489ef952897852d85f/config
Defconfig : http://autobuild.buildroot.net/results/0ac4860319240fbb8bcfd6489ef952897852d85f/defconfig
Build 2bea89d91ca187e71b364d60000b7adb3914d24a
==============================================
Status : NOK
Failure reason : util-linux-2.20.1
Architecture : aarch64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 06:30:56
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/2bea89d91ca187e71b364d60000b7adb3914d24a/build-end.log
Complete log : http://autobuild.buildroot.net/results/2bea89d91ca187e71b364d60000b7adb3914d24a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2bea89d91ca187e71b364d60000b7adb3914d24a/config
Defconfig : http://autobuild.buildroot.net/results/2bea89d91ca187e71b364d60000b7adb3914d24a/defconfig
Build 04aee56a0ccd2596473726b6ac4665c0c80b3232
==============================================
Status : NOK
Failure reason : boost-1.49.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 06:35:46
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/04aee56a0ccd2596473726b6ac4665c0c80b3232/build-end.log
Complete log : http://autobuild.buildroot.net/results/04aee56a0ccd2596473726b6ac4665c0c80b3232/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/04aee56a0ccd2596473726b6ac4665c0c80b3232/config
Defconfig : http://autobuild.buildroot.net/results/04aee56a0ccd2596473726b6ac4665c0c80b3232/defconfig
Build 4799f4d72b82efa8097fd405aa82ef1e578630b9
==============================================
Status : NOK
Failure reason : boost-1.49.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 07:35:10
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/4799f4d72b82efa8097fd405aa82ef1e578630b9/build-end.log
Complete log : http://autobuild.buildroot.net/results/4799f4d72b82efa8097fd405aa82ef1e578630b9/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/4799f4d72b82efa8097fd405aa82ef1e578630b9/config
Defconfig : http://autobuild.buildroot.net/results/4799f4d72b82efa8097fd405aa82ef1e578630b9/defconfig
Build c60fdef027db548a6cd3e87456d844af358411ef
==============================================
Status : NOK
Failure reason : netatalk-3.0
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 08:24:40
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/c60fdef027db548a6cd3e87456d844af358411ef/build-end.log
Complete log : http://autobuild.buildroot.net/results/c60fdef027db548a6cd3e87456d844af358411ef/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/c60fdef027db548a6cd3e87456d844af358411ef/config
Defconfig : http://autobuild.buildroot.net/results/c60fdef027db548a6cd3e87456d844af358411ef/defconfig
Build 351990b26346cf00b759061e76ac27325d742444
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 09:00:49
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/351990b26346cf00b759061e76ac27325d742444/build-end.log
Complete log : http://autobuild.buildroot.net/results/351990b26346cf00b759061e76ac27325d742444/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/351990b26346cf00b759061e76ac27325d742444/config
Defconfig : http://autobuild.buildroot.net/results/351990b26346cf00b759061e76ac27325d742444/defconfig
Build 1542f5f8ff6bc8737b3d7dd96e9bfe6f1865bc00
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 09:13:19
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/1542f5f8ff6bc8737b3d7dd96e9bfe6f1865bc00/build-end.log
Complete log : http://autobuild.buildroot.net/results/1542f5f8ff6bc8737b3d7dd96e9bfe6f1865bc00/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/1542f5f8ff6bc8737b3d7dd96e9bfe6f1865bc00/config
Defconfig : http://autobuild.buildroot.net/results/1542f5f8ff6bc8737b3d7dd96e9bfe6f1865bc00/defconfig
Build fe18dd4a0b0d17404560abf3e4a332b58751f5cb
==============================================
Status : NOK
Failure reason : arptables-0.0.3
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 10:33:59
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=b40ec0b651c36610a74c57bf5237c892c1647ea1
End of log : http://autobuild.buildroot.net/results/fe18dd4a0b0d17404560abf3e4a332b58751f5cb/build-end.log
Complete log : http://autobuild.buildroot.net/results/fe18dd4a0b0d17404560abf3e4a332b58751f5cb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fe18dd4a0b0d17404560abf3e4a332b58751f5cb/config
Defconfig : http://autobuild.buildroot.net/results/fe18dd4a0b0d17404560abf3e4a332b58751f5cb/defconfig
Build 6d8a3908098ed6c742143b3c4876ea2fa4709dc3
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 11:58:23
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/6d8a3908098ed6c742143b3c4876ea2fa4709dc3/build-end.log
Complete log : http://autobuild.buildroot.net/results/6d8a3908098ed6c742143b3c4876ea2fa4709dc3/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6d8a3908098ed6c742143b3c4876ea2fa4709dc3/config
Defconfig : http://autobuild.buildroot.net/results/6d8a3908098ed6c742143b3c4876ea2fa4709dc3/defconfig
Build 6fc8804fbc8a2607cf5f74706204529b56533e1c
==============================================
Status : NOK
Failure reason : icu-4.8.1.1
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 12:03:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/6fc8804fbc8a2607cf5f74706204529b56533e1c/build-end.log
Complete log : http://autobuild.buildroot.net/results/6fc8804fbc8a2607cf5f74706204529b56533e1c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6fc8804fbc8a2607cf5f74706204529b56533e1c/config
Defconfig : http://autobuild.buildroot.net/results/6fc8804fbc8a2607cf5f74706204529b56533e1c/defconfig
Build cc6c740319517d552a3dc5e8d23b1539dbebeb85
==============================================
Status : NOK
Failure reason : libnfc-fda8d60ce062
Architecture : avr32
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 12:26:09
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/cc6c740319517d552a3dc5e8d23b1539dbebeb85/build-end.log
Complete log : http://autobuild.buildroot.net/results/cc6c740319517d552a3dc5e8d23b1539dbebeb85/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/cc6c740319517d552a3dc5e8d23b1539dbebeb85/config
Defconfig : http://autobuild.buildroot.net/results/cc6c740319517d552a3dc5e8d23b1539dbebeb85/defconfig
Build 453695eacc8afae63b2f79d57bdd31428453f2ad
==============================================
Status : NOK
Failure reason : pcsc-lite-1.8.6
Architecture : avr32
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 12:49:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/453695eacc8afae63b2f79d57bdd31428453f2ad/build-end.log
Complete log : http://autobuild.buildroot.net/results/453695eacc8afae63b2f79d57bdd31428453f2ad/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/453695eacc8afae63b2f79d57bdd31428453f2ad/config
Defconfig : http://autobuild.buildroot.net/results/453695eacc8afae63b2f79d57bdd31428453f2ad/defconfig
Build fb06c5396abca231d741835dc45568fc98ce0012
==============================================
Status : NOK
Failure reason : bluez_utils-4.101
Architecture : avr32
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 12:57:23
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/fb06c5396abca231d741835dc45568fc98ce0012/build-end.log
Complete log : http://autobuild.buildroot.net/results/fb06c5396abca231d741835dc45568fc98ce0012/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fb06c5396abca231d741835dc45568fc98ce0012/config
Defconfig : http://autobuild.buildroot.net/results/fb06c5396abca231d741835dc45568fc98ce0012/defconfig
Build 6d5a0897883b9277eebd2988b9204142fb526c24
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 13:52:03
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/6d5a0897883b9277eebd2988b9204142fb526c24/build-end.log
Complete log : http://autobuild.buildroot.net/results/6d5a0897883b9277eebd2988b9204142fb526c24/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6d5a0897883b9277eebd2988b9204142fb526c24/config
Defconfig : http://autobuild.buildroot.net/results/6d5a0897883b9277eebd2988b9204142fb526c24/defconfig
Build 3f7dcdd2a447707dfb6c89ecc1b5c72cda7b2b5b
==============================================
Status : NOK
Failure reason : host-python-2.7.2
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-11-21 14:27:28
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/3f7dcdd2a447707dfb6c89ecc1b5c72cda7b2b5b/build-end.log
Complete log : http://autobuild.buildroot.net/results/3f7dcdd2a447707dfb6c89ecc1b5c72cda7b2b5b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3f7dcdd2a447707dfb6c89ecc1b5c72cda7b2b5b/config
Defconfig : http://autobuild.buildroot.net/results/3f7dcdd2a447707dfb6c89ecc1b5c72cda7b2b5b/defconfig
Build 2743bbe0a2932fa4c9f0d009a4ef87bdf8d90718
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 14:50:30
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/2743bbe0a2932fa4c9f0d009a4ef87bdf8d90718/build-end.log
Complete log : http://autobuild.buildroot.net/results/2743bbe0a2932fa4c9f0d009a4ef87bdf8d90718/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2743bbe0a2932fa4c9f0d009a4ef87bdf8d90718/config
Defconfig : http://autobuild.buildroot.net/results/2743bbe0a2932fa4c9f0d009a4ef87bdf8d90718/defconfig
Build fb6bd8691f50a7b6e8153f774400e4384e5dce93
==============================================
Status : NOK
Failure reason : lcdproc-0.5.6
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-11-21 15:14:45
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/fb6bd8691f50a7b6e8153f774400e4384e5dce93/build-end.log
Complete log : http://autobuild.buildroot.net/results/fb6bd8691f50a7b6e8153f774400e4384e5dce93/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fb6bd8691f50a7b6e8153f774400e4384e5dce93/config
Defconfig : http://autobuild.buildroot.net/results/fb6bd8691f50a7b6e8153f774400e4384e5dce93/defconfig
Build 72e474df180bca01b712b0e875350fc31a493d4b
==============================================
Status : NOK
Failure reason : qtuio-abe4973ff6
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 15:52:38
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/72e474df180bca01b712b0e875350fc31a493d4b/build-end.log
Complete log : http://autobuild.buildroot.net/results/72e474df180bca01b712b0e875350fc31a493d4b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/72e474df180bca01b712b0e875350fc31a493d4b/config
Defconfig : http://autobuild.buildroot.net/results/72e474df180bca01b712b0e875350fc31a493d4b/defconfig
Build 4d11853b82ff25307b9f2aaca0b081a6e1fc0b09
==============================================
Status : NOK
Failure reason : qt-4.8.3
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 17:03:16
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/4d11853b82ff25307b9f2aaca0b081a6e1fc0b09/build-end.log
Complete log : http://autobuild.buildroot.net/results/4d11853b82ff25307b9f2aaca0b081a6e1fc0b09/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/4d11853b82ff25307b9f2aaca0b081a6e1fc0b09/config
Defconfig : http://autobuild.buildroot.net/results/4d11853b82ff25307b9f2aaca0b081a6e1fc0b09/defconfig
Build c3455544970d05368b918da3260ff57a72003325
==============================================
Status : NOK
Failure reason : host-python-2.7.2
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-11-21 17:11:02
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/c3455544970d05368b918da3260ff57a72003325/build-end.log
Complete log : http://autobuild.buildroot.net/results/c3455544970d05368b918da3260ff57a72003325/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/c3455544970d05368b918da3260ff57a72003325/config
Defconfig : http://autobuild.buildroot.net/results/c3455544970d05368b918da3260ff57a72003325/defconfig
Build 828a7de5b8550c29189a9aae2c877c8ead3e849a
==============================================
Status : NOK
Failure reason : qt-4.8.3
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 17:45:46
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/828a7de5b8550c29189a9aae2c877c8ead3e849a/build-end.log
Complete log : http://autobuild.buildroot.net/results/828a7de5b8550c29189a9aae2c877c8ead3e849a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/828a7de5b8550c29189a9aae2c877c8ead3e849a/config
Defconfig : http://autobuild.buildroot.net/results/828a7de5b8550c29189a9aae2c877c8ead3e849a/defconfig
Build 116f3ba76c889967f344e3c2f42291e0b02b1864
==============================================
Status : NOK
Failure reason : lcdproc-0.5.6
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 17:46:55
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/116f3ba76c889967f344e3c2f42291e0b02b1864/build-end.log
Complete log : http://autobuild.buildroot.net/results/116f3ba76c889967f344e3c2f42291e0b02b1864/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/116f3ba76c889967f344e3c2f42291e0b02b1864/config
Defconfig : http://autobuild.buildroot.net/results/116f3ba76c889967f344e3c2f42291e0b02b1864/defconfig
Build 784f67337e801ad77b20028cc8d4c9a9b1dba9fc
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 18:30:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/784f67337e801ad77b20028cc8d4c9a9b1dba9fc/build-end.log
Complete log : http://autobuild.buildroot.net/results/784f67337e801ad77b20028cc8d4c9a9b1dba9fc/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/784f67337e801ad77b20028cc8d4c9a9b1dba9fc/config
Defconfig : http://autobuild.buildroot.net/results/784f67337e801ad77b20028cc8d4c9a9b1dba9fc/defconfig
Build 105231c00736990238eef6882dfaeb1c83594e6a
==============================================
Status : NOK
Failure reason : sconeserver-180
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 18:55:12
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/105231c00736990238eef6882dfaeb1c83594e6a/build-end.log
Complete log : http://autobuild.buildroot.net/results/105231c00736990238eef6882dfaeb1c83594e6a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/105231c00736990238eef6882dfaeb1c83594e6a/config
Defconfig : http://autobuild.buildroot.net/results/105231c00736990238eef6882dfaeb1c83594e6a/defconfig
Build f1249d6d39f7935a5227ec76bba7e17dc0c4fb63
==============================================
Status : NOK
Failure reason : host-python-2.7.2
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 19:03:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/f1249d6d39f7935a5227ec76bba7e17dc0c4fb63/build-end.log
Complete log : http://autobuild.buildroot.net/results/f1249d6d39f7935a5227ec76bba7e17dc0c4fb63/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f1249d6d39f7935a5227ec76bba7e17dc0c4fb63/config
Defconfig : http://autobuild.buildroot.net/results/f1249d6d39f7935a5227ec76bba7e17dc0c4fb63/defconfig
Build a102474ec04d778dc37c8d754e86866e81112bbc
==============================================
Status : NOK
Failure reason : kexec-2.0.3
Architecture : mips64el
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 19:47:32
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/a102474ec04d778dc37c8d754e86866e81112bbc/build-end.log
Complete log : http://autobuild.buildroot.net/results/a102474ec04d778dc37c8d754e86866e81112bbc/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a102474ec04d778dc37c8d754e86866e81112bbc/config
Defconfig : http://autobuild.buildroot.net/results/a102474ec04d778dc37c8d754e86866e81112bbc/defconfig
Build 86ae39be3569608f739f7e1052d8f0fc7a8c726c
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 20:04:44
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/86ae39be3569608f739f7e1052d8f0fc7a8c726c/build-end.log
Complete log : http://autobuild.buildroot.net/results/86ae39be3569608f739f7e1052d8f0fc7a8c726c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/86ae39be3569608f739f7e1052d8f0fc7a8c726c/config
Defconfig : http://autobuild.buildroot.net/results/86ae39be3569608f739f7e1052d8f0fc7a8c726c/defconfig
Build 7edbadfa7e6dbaf9272d9fde1ef720aa9d192acf
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-11-21 20:14:55
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/7edbadfa7e6dbaf9272d9fde1ef720aa9d192acf/build-end.log
Complete log : http://autobuild.buildroot.net/results/7edbadfa7e6dbaf9272d9fde1ef720aa9d192acf/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/7edbadfa7e6dbaf9272d9fde1ef720aa9d192acf/config
Defconfig : http://autobuild.buildroot.net/results/7edbadfa7e6dbaf9272d9fde1ef720aa9d192acf/defconfig
Build 747fb6239b37cc958a5b35e5d6f843b016fab344
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 21:08:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/747fb6239b37cc958a5b35e5d6f843b016fab344/build-end.log
Complete log : http://autobuild.buildroot.net/results/747fb6239b37cc958a5b35e5d6f843b016fab344/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/747fb6239b37cc958a5b35e5d6f843b016fab344/config
Defconfig : http://autobuild.buildroot.net/results/747fb6239b37cc958a5b35e5d6f843b016fab344/defconfig
Build 643ca5f7ef67fe5677c9cbc0753209133a81aa7a
==============================================
Status : NOK
Failure reason : mplayer-1.1
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 22:31:06
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/643ca5f7ef67fe5677c9cbc0753209133a81aa7a/build-end.log
Complete log : http://autobuild.buildroot.net/results/643ca5f7ef67fe5677c9cbc0753209133a81aa7a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/643ca5f7ef67fe5677c9cbc0753209133a81aa7a/config
Defconfig : http://autobuild.buildroot.net/results/643ca5f7ef67fe5677c9cbc0753209133a81aa7a/defconfig
Build df3a3bbd9b9f3174ad7746d9e1a23aa7b840e3da
==============================================
Status : NOK
Failure reason : libnss-3.12.9
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 23:16:24
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/df3a3bbd9b9f3174ad7746d9e1a23aa7b840e3da/build-end.log
Complete log : http://autobuild.buildroot.net/results/df3a3bbd9b9f3174ad7746d9e1a23aa7b840e3da/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/df3a3bbd9b9f3174ad7746d9e1a23aa7b840e3da/config
Defconfig : http://autobuild.buildroot.net/results/df3a3bbd9b9f3174ad7746d9e1a23aa7b840e3da/defconfig
Build 4fd58808981c082ebb7564a17f1ba0c590c7e3dd
==============================================
Status : NOK
Failure reason : valgrind-3.7.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 23:17:19
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/4fd58808981c082ebb7564a17f1ba0c590c7e3dd/build-end.log
Complete log : http://autobuild.buildroot.net/results/4fd58808981c082ebb7564a17f1ba0c590c7e3dd/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/4fd58808981c082ebb7564a17f1ba0c590c7e3dd/config
Defconfig : http://autobuild.buildroot.net/results/4fd58808981c082ebb7564a17f1ba0c590c7e3dd/defconfig
Build 9a3e60653a7041a102cfb55742d48d7b94014a89
==============================================
Status : NOK
Failure reason : gpsd-3.7
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 23:30:54
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/9a3e60653a7041a102cfb55742d48d7b94014a89/build-end.log
Complete log : http://autobuild.buildroot.net/results/9a3e60653a7041a102cfb55742d48d7b94014a89/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/9a3e60653a7041a102cfb55742d48d7b94014a89/config
Defconfig : http://autobuild.buildroot.net/results/9a3e60653a7041a102cfb55742d48d7b94014a89/defconfig
Build 86c03bc01c15b8c43cd329fee32a62a31b9b3b39
==============================================
Status : NOK
Failure reason : mplayer-1.1
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 23:42:21
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/86c03bc01c15b8c43cd329fee32a62a31b9b3b39/build-end.log
Complete log : http://autobuild.buildroot.net/results/86c03bc01c15b8c43cd329fee32a62a31b9b3b39/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/86c03bc01c15b8c43cd329fee32a62a31b9b3b39/config
Defconfig : http://autobuild.buildroot.net/results/86c03bc01c15b8c43cd329fee32a62a31b9b3b39/defconfig
Build 5b7268300c17ccb7ef1e3bff9068115ca5aef0a9
==============================================
Status : NOK
Failure reason : libhid-0.2.16
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-11-21 23:54:20
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=e1ebae700ace80ded99e1a977e28375dc4f7255d
End of log : http://autobuild.buildroot.net/results/5b7268300c17ccb7ef1e3bff9068115ca5aef0a9/build-end.log
Complete log : http://autobuild.buildroot.net/results/5b7268300c17ccb7ef1e3bff9068115ca5aef0a9/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5b7268300c17ccb7ef1e3bff9068115ca5aef0a9/config
Defconfig : http://autobuild.buildroot.net/results/5b7268300c17ccb7ef1e3bff9068115ca5aef0a9/defconfig
--
http://autobuild.buildroot.net
^ permalink raw reply
* [Buildroot] Solving the mesa3d build issue
From: Thomas Petazzoni @ 2012-11-22 7:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <50AD1EC3.4090401@mind.be>
Arnout,
On Wed, 21 Nov 2012 19:34:43 +0100, Arnout Vandecappelle wrote:
> A fourth solution would be to create a new host-only package libxml2-python
> that builds libxml2 with python bindings. It would just reuse the libxml2
> package with a slightly different CONF_OPT.
>
> The differences with the currently committed solution (1) are:
>
> - No need for a HOST-config symbol.
>
> - host-libxml2 will be built twice, once without and once with python bindings.
>
> There may even be a workaround for the second step, but at the moment I assume
> it will be built twice.
>
> What do you think?
This is indeed another solution. But just like the kconfig knob for a
host package creates a precedent, having two separate binary packages
for one single source package is also creating another precedent. I'm
not sure which is not is better, really.
Or maybe it's time for Buildroot to make the distinction between source
packages and binary packages? But this is going to be a very large
change.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH 1/2] kernel-headers: bump 3.{0, 2, 4, 6}.x stable versions
From: Peter Korsgaard @ 2012-11-22 7:56 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1353494120-19414-1-git-send-email-gustavo@zacarias.com.ar>
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
Gustavo> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Committed both, thanks,
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] crosstools build fails when hard fpu is selected
From: Thierry Bultel @ 2012-11-22 8:46 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121121132549.7c180f2f@skate>
Thanks Thomas,
thanks to Yann's advice,
I have been able to generate an ARM gcc with Neon support,
and performed some performance testing on my target.
( the root filesystem is for now the one with soft float).
But this is an external crosstool-ng (1.17.0) build.
Thus I have attempted to configure Buildroot to use this
external toolchain.
The build fails at ncurses (see below)
I thought that is was due to the fact that the "Use soft float by
default" option was not available when using an external toolchain (why
?) but I have the same issue when crosstol-ng is built within buildroot
(and the option deselected of course)
I am still investigating, but if you have a clue I would appreciate
Thanks
Thierry
>>> ncurses 5.9 Building
/usr/bin/make -j1 -C
/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9
DESTDIR=/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot
make[1]: entrant dans le r?pertoire ?
/bigdisk/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9 ?
cd man && /usr/bin/make -w --
DESTDIR=/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot
DESTDIR="/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot"
all
make[2]: entrant dans le r?pertoire ?
/bigdisk/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9/man ?
make[2]: Rien ? faire pour ? all ?.
make[2]: quittant le r?pertoire ?
/bigdisk/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9/man ?
cd include && /usr/bin/make -w --
DESTDIR=/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot
DESTDIR="/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot"
all
make[2]: entrant dans le r?pertoire ?
/bigdisk/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9/include ?
make[2]: Rien ? faire pour ? all ?.
make[2]: quittant le r?pertoire ?
/bigdisk/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9/include ?
cd ncurses && /usr/bin/make -w --
DESTDIR=/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot
DESTDIR="/shared/Buildroot/output.imx6hardfpu/host/usr/arm-unknown-linux-gnueabi/sysroot"
all
make[2]: entrant dans le r?pertoire ?
/bigdisk/shared/Buildroot/output.imx6hardfpu/build/ncurses-5.9/ncurses ?
linking ../lib/libncurses.so.5.9
/shared/Buildroot/output.imx6hardfpu/host/usr/bin/ccache
/shared/Buildroot/output.imx6hardfpu/host/usr/bin/arm-unknown-linux-gnueabi-gcc
-pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE
-D_FILE_OFFSET_BITS=64 --param max-inline-insns-single=1200 -shared
-Wl,-soname,`basename ../lib/libncurses.so.5.9 .5.9`.5,-stats,-lc -o
../lib/libncurses.so.5.9 ../obj_s/hardscroll.o ../obj_s/hashmap.o
../obj_s/lib_addch.o ../obj_s/lib_addstr.o ../obj_s/lib_beep.o
../obj_s/lib_bkgd.o ../obj_s/lib_box.o ../obj_s/lib_chgat.o
../obj_s/lib_clear.o ../obj_s/lib_clearok.o ../obj_s/lib_clrbot.o
../obj_s/lib_clreol.o ../obj_s/lib_color.o ../obj_s/lib_colorset.o
../obj_s/lib_delch.o ../obj_s/lib_delwin.o ../obj_s/lib_echo.o
../obj_s/lib_endwin.o ../obj_s/lib_erase.o ../obj_s/lib_flash.o
../obj_s/lib_gen.o ../obj_s/lib_getch.o ../obj_s/lib_getstr.o
../obj_s/lib_hline.o ../obj_s/lib_immedok.o ../obj_s/lib_inchstr.o
../obj_s/lib_initscr.o ../obj_s/lib_insch.o ../obj_s/lib_insdel.o
../obj_s/lib_insnstr.o ../obj_s/lib_instr.o ../obj_s/lib_isendwin.o
../obj_s/lib_leaveok.o ../obj_s/lib_mouse.o ../obj_s/lib_move.o
../obj_s/lib_mvcur.o ../obj_s/lib_mvwin.o ../obj_s/lib_newterm.o
../obj_s/lib_newwin.o ../obj_s/lib_nl.o ../obj_s/lib_overlay.o
../obj_s/lib_pad.o ../obj_s/lib_printw.o ../obj_s/lib_redrawln.o
../obj_s/lib_refresh.o ../obj_s/lib_restart.o ../obj_s/lib_scanw.o
../obj_s/lib_screen.o ../obj_s/lib_scroll.o ../obj_s/lib_scrollok.o
../obj_s/lib_scrreg.o ../obj_s/lib_set_term.o ../obj_s/lib_slk.o
../obj_s/lib_slkatr_set.o ../obj_s/lib_slkatrof.o
../obj_s/lib_slkatron.o ../obj_s/lib_slkatrset.o ../obj_s/lib_slkattr.o
../obj_s/lib_slkclear.o ../obj_s/lib_slkcolor.o ../obj_s/lib_slkinit.o
../obj_s/lib_slklab.o ../obj_s/lib_slkrefr.o ../obj_s/lib_slkset.o
../obj_s/lib_slktouch.o ../obj_s/lib_touch.o ../obj_s/lib_tstp.o
../obj_s/lib_ungetch.o ../obj_s/lib_vidattr.o ../obj_s/lib_vline.o
../obj_s/lib_wattroff.o ../obj_s/lib_wattron.o ../obj_s/lib_winch.o
../obj_s/lib_window.o ../obj_s/nc_panel.o ../obj_s/safe_sprintf.o
../obj_s/tty_update.o ../obj_s/varargs.o ../obj_s/memmove.o
../obj_s/vsscanf.o ../obj_s/lib_freeall.o ../obj_s/expanded.o
../obj_s/legacy_coding.o ../obj_s/lib_dft_fgbg.o ../obj_s/lib_print.o
../obj_s/resizeterm.o ../obj_s/use_screen.o ../obj_s/use_window.o
../obj_s/wresize.o ../obj_s/access.o ../obj_s/add_tries.o
../obj_s/alloc_ttype.o ../obj_s/codes.o ../obj_s/comp_captab.o
../obj_s/comp_error.o ../obj_s/comp_hash.o ../obj_s/db_iterator.o
../obj_s/doalloc.o ../obj_s/entries.o ../obj_s/fallback.o
../obj_s/free_ttype.o ../obj_s/getenv_num.o ../obj_s/home_terminfo.o
../obj_s/init_keytry.o ../obj_s/lib_acs.o ../obj_s/lib_baudrate.o
../obj_s/lib_cur_term.o ../obj_s/lib_data.o ../obj_s/lib_has_cap.o
../obj_s/lib_kernel.o ../obj_s/lib_keyname.o ../obj_s/lib_longname.o
../obj_s/lib_napms.o ../obj_s/lib_options.o ../obj_s/lib_raw.o
../obj_s/lib_setup.o ../obj_s/lib_termcap.o ../obj_s/lib_termname.o
../obj_s/lib_tgoto.o ../obj_s/lib_ti.o ../obj_s/lib_tparm.o
../obj_s/lib_tputs.o ../obj_s/lib_trace.o ../obj_s/lib_ttyflags.o
../obj_s/lib_twait.o ../obj_s/name_match.o ../obj_s/names.o
../obj_s/read_entry.o ../obj_s/read_termcap.o ../obj_s/setbuf.o
../obj_s/strings.o ../obj_s/tries.o ../obj_s/trim_sgr0.o
../obj_s/unctrl.o ../obj_s/visbuf.o ../obj_s/define_key.o
../obj_s/hashed_db.o ../obj_s/key_defined.o ../obj_s/keybound.o
../obj_s/keyok.o ../obj_s/version.o -L../lib
/home/tbultel/x-tools/arm-unknown-linux-gnueabi/lib/gcc/arm-unknown-linux-gnueabi/4.6.3/../../../../arm-unknown-linux-gnueabi/bin/ld:
error: ../lib/libncurses.so.5.9 uses VFP register arguments,
../obj_s/hardscroll.o does not
Le 21/11/2012 13:25, Thomas Petazzoni a ?crit :
> Dear Thierry Bultel,
>
> On Wed, 21 Nov 2012 11:23:20 +0100, Thierry Bultel wrote:
>
>> GCC has not been generated with the harware FPU support.
>>
>> I have attempted several hacks into
>> toolchain/toolchain-crosstool-ng/crosstool-ng.config-glibc
>>
>> ... with no better success
>>
>> Any ideas ?
>
> Yes, raise this problem on the crosstool-ng mailing list. I know Yann
> is aware of this, and he will most likely have recommendations on how
> to fix this problem.
>
> Thanks,
>
> Thomas
>
^ permalink raw reply
* [Buildroot] crosstools build fails when hard fpu is selected
From: Thomas Petazzoni @ 2012-11-22 8:52 UTC (permalink / raw)
To: buildroot
In-Reply-To: <50ADE660.6000802@wanadoo.fr>
Dear Thierry Bultel,
On Thu, 22 Nov 2012 09:46:24 +0100, Thierry Bultel wrote:
> I thought that is was due to the fact that the "Use soft float by
> default" option was not available when using an external toolchain (why
> ?) but I have the same issue when crosstol-ng is built within buildroot
> (and the option deselected of course)
>
> I am still investigating, but if you have a clue I would appreciate
> /home/tbultel/x-tools/arm-unknown-linux-gnueabi/lib/gcc/arm-unknown-linux-gnueabi/4.6.3/../../../../arm-unknown-linux-gnueabi/bin/ld:
> error: ../lib/libncurses.so.5.9 uses VFP register arguments,
> ../obj_s/hardscroll.o does not
From a quick look, it smells like not everybody has been built with the
same CFLAGS or something like that. Like part of it has been built with
hardfp, and some other with softfp. I would think "use VFP register
arguments" means hardfp (floating point values are passed to functions
through the floating-point registers). So libncurses.so.5.9 would be
hardfp, and hardscroll.o would be softfp or soft-float and that cannot
be linked together.
Are you sure you disabled BR2_SOFT_FLOAT in Buildroot? Check the entire
build log of ncurses to see which compiler flags are being passed.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] output/target isn't synced with the actual target
From: Vadim Malenboim @ 2012-11-22 9:01 UTC (permalink / raw)
To: buildroot
Hello,
I have libs in output/target/usr/lib but nothing on the actual target.
In addition no all libs that are present in output/target/lib are actually
present on the target.
On host :
-rwxr-xr-x 1 vadim tangotec 21224 Nov 22 09:45 ld-uClibc-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 23 Nov 22 09:42 ld-uClibc.so.0 ->
ld-uClibc-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 9456 Nov 22 09:45 libcrypt-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 22 Nov 22 09:42 libcrypt.so.0 ->
libcrypt-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 23 Nov 22 09:42 libc.so.0 ->
libuClibc-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 8384 Nov 22 09:45 libdl-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 19 Nov 22 09:42 libdl.so.0 ->
libdl-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 13 Nov 22 09:44 libgcc_s.so -> libgcc_s.so.1
-rw-r--r-- 1 vadim tangotec 49764 Nov 22 09:44 libgcc_s.so.1
-rwxr-xr-x 1 vadim tangotec 65708 Nov 22 09:45 libm-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 18 Nov 22 09:42 libm.so.0 ->
libm-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 1332 Nov 22 09:45 libnsl-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 20 Nov 22 09:42 libnsl.so.0 ->
libnsl-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 62080 Nov 22 09:45 libpthread-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 24 Nov 22 09:42 libpthread.so.0 ->
libpthread-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 1340 Nov 22 09:45 libresolv-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 23 Nov 22 09:42 libresolv.so.0 ->
libresolv-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 8224 Nov 22 09:45 librt-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 19 Nov 22 09:42 librt.so.0 ->
librt-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 4380 Nov 22 09:45 libubacktrace-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 27 Nov 22 09:42 libubacktrace.so.0 ->
libubacktrace-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 329184 Nov 22 09:45 libuClibc-0.9.34-git.so
-rwxr-xr-x 1 vadim tangotec 4656 Nov 22 09:45 libutil-0.9.34-git.so
lrwxrwxrwx 1 vadim tangotec 21 Nov 22 09:42 libutil.so.0 ->
libutil-0.9.34-git.so
[vadim at xn02 buildroot]$ cp output/target/usr/lib/libstdc++.so.6
/tftpboot/vadim/
On target :
-rwxr-xr-x 1 root root 21224 Nov 22 2012
ld-uClibc-0.9.34-git.so
lrwxrwxrwx 1 root root 23 Nov 22 2012 ld-uClibc.so.0 ->
ld-uClibc-0.9.34-git.so
lrwxrwxrwx 1 root root 23 Nov 22 2012 libc.so.0 ->
libuClibc-0.9.34-git.so
-rwxr-xr-x 1 root root 9456 Nov 22 2012
libcrypt-0.9.34-git.so
lrwxrwxrwx 1 root root 22 Nov 22 2012 libcrypt.so.0 ->
libcrypt-0.9.34-git.so
-rwxr-xr-x 1 root root 8384 Nov 22 2012 libdl-0.9.34-git.so
lrwxrwxrwx 1 root root 19 Nov 22 2012 libdl.so.0 ->
libdl-0.9.34-git.so
lrwxrwxrwx 1 root root 13 Nov 22 2012 libgcc_s.so ->
libgcc_s.so.1
-rw-r--r-- 1 root root 49764 Nov 22 2012 libgcc_s.so.1
-rwxr-xr-x 1 root root 65708 Nov 22 2012 libm-0.9.34-git.so
lrwxrwxrwx 1 root root 18 Nov 22 2012 libm.so.0 ->
libm-0.9.34-git.so
-rwxr-xr-x 1 root root 1332 Nov 22 2012
libnsl-0.9.34-git.so
lrwxrwxrwx 1 root root 20 Nov 22 2012 libnsl.so.0 ->
libnsl-0.9.34-git.so
-rwxr-xr-x 1 root root 62080 Nov 22 2012
libpthread-0.9.34-git.so
lrwxrwxrwx 1 root root 24 Nov 22 2012 libpthread.so.0 ->
libpthread-0.9.34-git.so
-rwxr-xr-x 1 root root 1340 Nov 22 2012
libresolv-0.9.34-git.so
lrwxrwxrwx 1 root root 23 Nov 22 2012 libresolv.so.0 ->
libresolv-0.9.34-git.so
-rwxr-xr-x 1 root root 8224 Nov 22 2012 librt-0.9.34-git.so
lrwxrwxrwx 1 root root 19 Nov 22 2012 librt.so.0 ->
librt-0.9.34-git.so
-rwxr-xr-x 1 root root 293484 Nov 22 2012
libuClibc-0.9.34-git.so
-rwxr-xr-x 1 root root 4656 Nov 22 2012
libutil-0.9.34-git.so
lrwxrwxrwx 1 root root 21 Nov 22 2012 libutil.so.0 ->
libutil-0.9.34-git.so
# tftp -g -r /vadim/libstdc++.so.6 192.168.217.32
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121122/026ea662/attachment-0001.html>
^ permalink raw reply
* [Buildroot] [PATCH] arptables: needs mmu
From: Gustavo Zacarias @ 2012-11-22 9:46 UTC (permalink / raw)
To: buildroot
arptables uses fork() and breaks on !mmu.
Fixes
http://autobuild.buildroot.net/results/fe18dd4a0b0d17404560abf3e4a332b58751f5cb/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
---
package/arptables/Config.in | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/package/arptables/Config.in b/package/arptables/Config.in
index 510eedf..414fabb 100644
--- a/package/arptables/Config.in
+++ b/package/arptables/Config.in
@@ -1,5 +1,7 @@
config BR2_PACKAGE_ARPTABLES
bool "arptables"
+ # needs fork()
+ depends on BR2_USE_MMU
help
Tool to set up, maintain, and inspect the tables of ARP rules.
--
1.7.8.6
^ permalink raw reply related
* [Buildroot] [PATCH 32/33] rrdtool: add license info
From: Samuel Martin @ 2012-11-22 10:07 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121122051744.GA10958@sapphire.tkos.co.il>
Hi Baruch, all,
2012/11/22 Baruch Siach <baruch@tkos.co.il>:
> Hi Samuel,
>
> On Thu, Nov 22, 2012 at 01:18:22AM +0100, Samuel Martin wrote:
>>
>> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
>> ---
>> package/rrdtool/rrdtool.mk | 3 +++
>> 1 file changed, 3 insertions(+)
>>
>> diff --git a/package/rrdtool/rrdtool.mk b/package/rrdtool/rrdtool.mk
>> index 8799a85..4392b50 100644
>> --- a/package/rrdtool/rrdtool.mk
>> +++ b/package/rrdtool/rrdtool.mk
>> @@ -6,6 +6,9 @@
>>
>> RRDTOOL_VERSION = 1.2.30
>> RRDTOOL_SITE = http://oss.oetiker.ch/rrdtool/pub
>> +RRDTOOL_LICENSE = GPLv2+ with FLOSS license exceptions as explained in COPYRIGHT
>> +RRDTOOL_LICENSE_FILES = COPYING
>
> Shouldn't COPYRIGHT also be listed with the license files?
The Copyright file just tells us "wrt the license, you can do that and
that, but not that with this software",
with some real use case.
Shall we consider as part of the license files?
Regards,
--
Sam
^ permalink raw reply
* [Buildroot] [PATCH 02/33] libpcap: add pcap.pc file
From: Thomas Petazzoni @ 2012-11-22 10:09 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1353543503-8952-3-git-send-email-s.martin49@gmail.com>
Dear Samuel Martin,
On Thu, 22 Nov 2012 01:17:52 +0100, Samuel Martin wrote:
>
> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> ---
> package/libpcap/libpcap.mk | 10 ++++++++++
> package/libpcap/pcap.pc | 12 ++++++++++++
> 2 files changed, 22 insertions(+)
> create mode 100644 package/libpcap/pcap.pc
I don't remember if I asked the question already or not, but anyway:
has this pcap.pc been pushed upstream?
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH 03/33] tcpdump: use 'pkg-config pcap' instead of pcap-config
From: Thomas Petazzoni @ 2012-11-22 10:10 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1353543503-8952-4-git-send-email-s.martin49@gmail.com>
Dear Samuel Martin,
On Thu, 22 Nov 2012 01:17:53 +0100, Samuel Martin wrote:
> +- AC_PATH_TOOL(PCAP_CONFIG, pcap-config)
> ++ AC_PATH_TOOL(PCAP_CONFIG, pkg-config)
This is not generally how pkg-config is used. In general, people use
the PKG_CHECK_MODULES() autoconf macro.
Has this been pushed upstream? I guess you need to make it smarter
like: start testing with pkg-config, then fallback to pcap-config, in
order to make this suitable for upstream.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH 04/33] igh-ethercat: disable drivers build with kernel 3.6
From: Thomas Petazzoni @ 2012-11-22 10:12 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1353543503-8952-5-git-send-email-s.martin49@gmail.com>
Dear Samuel Martin,
On Thu, 22 Nov 2012 01:17:54 +0100, Samuel Martin wrote:
> Since hardware specific support is available for some given kernel
> releases (mostly for kernel <=3.2), then disable them if kernel 3.6 is
> enable. However, this still allows the generic driver build.
>
> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> ---
> package/igh-ethercat/Config.in | 7 ++++++-
> 1 file changed, 6 insertions(+), 1 deletion(-)
>
> diff --git a/package/igh-ethercat/Config.in b/package/igh-ethercat/Config.in
> index 890bb12..4a0fd75 100644
> --- a/package/igh-ethercat/Config.in
> +++ b/package/igh-ethercat/Config.in
> @@ -6,7 +6,12 @@ config BR2_PACKAGE_IGH_ETHERCAT
>
> http://www.etherlab.org/en/ethercat/index.php
>
> -if BR2_PACKAGE_IGH_ETHERCAT
> +if BR2_PACKAGE_IGH_ETHERCAT && !BR2_LINUX_KERNEL_3_6
> +
> +comment "The following drivers are only available for some"
> +comment "releases of the kernel (mostly 2.6.x)."
> +comment "Further details about the kernel/hardware support at:"
> +comment "http://www.etherlab.org/en/ethercat/hardware.php"
I'm sorry but I don't quite understand neither the commit log nor the
comment here. Could you explain a bit more? Is this fixing any sort of
build problem?
Also !BR2_LINUX_KERNEL_3_6 works only if the user isn't using a custom
Git tree or something like that.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH 19/33] python2: bump to 2.7.3
From: Thomas Petazzoni @ 2012-11-22 10:16 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1353543503-8952-20-git-send-email-s.martin49@gmail.com>
Dear Samuel Martin,
On Thu, 22 Nov 2012 01:18:09 +0100, Samuel Martin wrote:
> Pyhton 2.7.3 includes several security fixes.
> See: http://www.python.org/download/releases/2.7.3/
>
> Also fixes the patch making sqlite optional.
>
> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> ---
> package/python/python-2.7-009-python-symlink.patch | 25 -----------------
Any reason for removing this one?
Thanks!
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] Fwd: can't resolve symbol 'wctob'
From: Vadim Malenboim @ 2012-11-22 10:20 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAJH6qSd6eEdg1pUK9e4tOS=1rw0xhN397Q=rx-Rmehi8fPcpeg@mail.gmail.com>
I have a uclibc based toolchain compiled with application.
When I try to run it on target I receive - can't resolve symbol 'wctob'
I understand that it is missing somewhere in the uclibc.
Where do I need to add it ?
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121122/d88a1723/attachment.html>
^ permalink raw reply
* [Buildroot] Fwd: can't resolve symbol 'wctob'
From: Gustavo Zacarias @ 2012-11-22 10:29 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAJH6qSdrqbOQ_oV6TcitJ0=P5G_A950GvKAOWWfUtvwLAcvhMQ@mail.gmail.com>
On 11/22/2012 07:20 AM, Vadim Malenboim wrote:
> I have a uclibc based toolchain compiled with application.
> When I try to run it on target I receive - can't resolve symbol 'wctob'
>
> I understand that it is missing somewhere in the uclibc.
> Where do I need to add it ?
You are missing WCHAR support.
Regards.
^ permalink raw reply
* [Buildroot] [PATCH 02/33] libpcap: add pcap.pc file
From: Samuel Martin @ 2012-11-22 10:39 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121122110905.4b984053@skate>
2012/11/22 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> Dear Samuel Martin,
>
> On Thu, 22 Nov 2012 01:17:52 +0100, Samuel Martin wrote:
>>
>> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
>> ---
>> package/libpcap/libpcap.mk | 10 ++++++++++
>> package/libpcap/pcap.pc | 12 ++++++++++++
>> 2 files changed, 22 insertions(+)
>> create mode 100644 package/libpcap/pcap.pc
>
> I don't remember if I asked the question already or not, but anyway:
> has this pcap.pc been pushed upstream?
Not yet, I'll do it.
Regards,
--
Sam
^ permalink raw reply
* [Buildroot] [PATCH] gstreamer: Added option to disable plugin registry.
From: Tim Sheridan @ 2012-11-22 10:43 UTC (permalink / raw)
To: buildroot
The plugin registry can take a while to be generated when GStreamer is
initialized. Turning it off can speed up GStreamer application launch times.
Default behavior is unchanged.
---
package/multimedia/gstreamer/Config.in | 9 +++++++++
package/multimedia/gstreamer/gstreamer.mk | 3 ++-
2 files changed, 11 insertions(+), 1 deletions(-)
diff --git a/package/multimedia/gstreamer/Config.in b/package/multimedia/gstreamer/Config.in
index 4d279b8..e946b18 100644
--- a/package/multimedia/gstreamer/Config.in
+++ b/package/multimedia/gstreamer/Config.in
@@ -16,5 +16,14 @@ config BR2_PACKAGE_GSTREAMER_GST_DEBUG
in gstreamer. This has limited CPU overhead, but does
increase the rootfs size somewhat.
+config BR2_PACKAGE_GSTREAMER_PLUGIN_REGISTRY
+ bool "enable plugin registry"
+ default y
+ depends on BR2_PACKAGE_GSTREAMER
+ help
+ Enable support for the GStreamer plugin registry.
+ This may increase the launch-time for a GStreamer
+ application.
+
comment "gstreamer requires a toolchain with WCHAR support"
depends on !BR2_USE_WCHAR
diff --git a/package/multimedia/gstreamer/gstreamer.mk b/package/multimedia/gstreamer/gstreamer.mk
index a9841b1..b87f029 100644
--- a/package/multimedia/gstreamer/gstreamer.mk
+++ b/package/multimedia/gstreamer/gstreamer.mk
@@ -21,7 +21,8 @@ GSTREAMER_CONF_OPT = \
--disable-tests \
--disable-failing-tests \
--disable-loadsave \
- $(if $(BR2_PACKAGE_GSTREAMER_GST_DEBUG),,--disable-gst-debug)
+ $(if $(BR2_PACKAGE_GSTREAMER_GST_DEBUG),,--disable-gst-debug) \
+ $(if $(BR2_PACKAGE_GSTREAMER_PLUGIN_REGISTRY),,--disable-registry)
GSTREAMER_DEPENDENCIES = libglib2 host-pkgconf
--
1.7.1
^ permalink raw reply related
* [Buildroot] [PATCH 03/33] tcpdump: use 'pkg-config pcap' instead of pcap-config
From: Samuel Martin @ 2012-11-22 10:46 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121122111041.73d397ee@skate>
Hi Thomas,
2012/11/22 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> Dear Samuel Martin,
>
> On Thu, 22 Nov 2012 01:17:53 +0100, Samuel Martin wrote:
>
>> +- AC_PATH_TOOL(PCAP_CONFIG, pcap-config)
>> ++ AC_PATH_TOOL(PCAP_CONFIG, pkg-config)
>
> This is not generally how pkg-config is used. In general, people use
> the PKG_CHECK_MODULES() autoconf macro.
>
> Has this been pushed upstream?
I've not tried to push this patch upstream yet.
> I guess you need to make it smarter
> like: start testing with pkg-config, then fallback to pcap-config, in
> order to make this suitable for upstream.
I agree.
The truth is I'm not so confident with autotools, so any enlightment is welcome.
Regards,
--
Sam
^ permalink raw reply
* [Buildroot] [PATCH 19/33] python2: bump to 2.7.3
From: Samuel Martin @ 2012-11-22 10:47 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121122111612.4bfdeee2@skate>
2012/11/22 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> Dear Samuel Martin,
>
> On Thu, 22 Nov 2012 01:18:09 +0100, Samuel Martin wrote:
>> Pyhton 2.7.3 includes several security fixes.
>> See: http://www.python.org/download/releases/2.7.3/
>>
>> Also fixes the patch making sqlite optional.
>>
>> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
>> ---
>> package/python/python-2.7-009-python-symlink.patch | 25 -----------------
>
> Any reason for removing this one?
Yes, fixed upstream in the 2.7.3 release :-)
Oops, sorry I forgot to mention this in the commit message; I'll fix it.
Regards,
--
Sam
^ permalink raw reply
* [Buildroot] Fwd: can't resolve symbol 'wctob'
From: Vadim Malenboim @ 2012-11-22 10:48 UTC (permalink / raw)
To: buildroot
In-Reply-To: <50ADFE85.6010306@zacarias.com.ar>
I suspected that this is the issue, however I specially added it in the
configuration.
I'll do another build from scratch adding the WCHAR.
Thank you.
On Thu, Nov 22, 2012 at 12:29 PM, Gustavo Zacarias
<gustavo@zacarias.com.ar>wrote:
> You are missing WCHAR support.
>
--
* Vadim Malenboim.*
Low Level Software Engineer.
Cellular : +972(544)925862
E-Mail : vadim at tangotec.com
WEB : www.tangotec.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121122/bb84ca5e/attachment.html>
^ permalink raw reply
* [Buildroot] [PATCH 19/33] python2: bump to 2.7.3
From: Thomas Petazzoni @ 2012-11-22 10:52 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAHXCMML2DTvu9uGzDe9pb+qQXhAAfDAEOsouacV50_r-+8rPLg@mail.gmail.com>
Dear Samuel Martin,
On Thu, 22 Nov 2012 11:47:21 +0100, Samuel Martin wrote:
> 2012/11/22 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> > Dear Samuel Martin,
> >
> > On Thu, 22 Nov 2012 01:18:09 +0100, Samuel Martin wrote:
> >> Pyhton 2.7.3 includes several security fixes.
> >> See: http://www.python.org/download/releases/2.7.3/
> >>
> >> Also fixes the patch making sqlite optional.
> >>
> >> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
> >> ---
> >> package/python/python-2.7-009-python-symlink.patch | 25 -----------------
> >
> > Any reason for removing this one?
> Yes, fixed upstream in the 2.7.3 release :-)
Awesome, something fixed upstream in Python \o/ :-)
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] Fwd: can't resolve symbol 'wctob'
From: Gustavo Zacarias @ 2012-11-22 10:53 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAJH6qSde3UfP0=bQH0C=EDAGRFA3AVezNE=hUT6y41=b9vegtg@mail.gmail.com>
On 11/22/2012 07:48 AM, Vadim Malenboim wrote:
> I suspected that this is the issue, however I specially added it in the
> configuration.
> I'll do another build from scratch adding the WCHAR.
>
> Thank you.
Yes, changing toolchain options requires a complete rebuild.
Regards.
^ permalink raw reply
* [Buildroot] output/target isn't synced with the actual target
From: Thomas Petazzoni @ 2012-11-22 10:58 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAJH6qSeGCdkP7rZL7iVxRoHXu6n0R-26K+kTqxH3MB6zVyUO3A@mail.gmail.com>
Dear Vadim Malenboim,
On Thu, 22 Nov 2012 11:01:26 +0200, Vadim Malenboim wrote:
> I have libs in output/target/usr/lib but nothing on the actual target.
> In addition no all libs that are present in output/target/lib are actually
> present on the target.
Well, are you sure you did reflash/transfer the new root filesystem
image to your target?
If you want to check, enable the generation of a "tar" image in
Buildroot, and verify that all files are properly in the tarball.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH 04/33] igh-ethercat: disable drivers build with kernel 3.6
From: Samuel Martin @ 2012-11-22 11:07 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121122111257.7cbf0562@skate>
2012/11/22 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>:
> Dear Samuel Martin,
>
> On Thu, 22 Nov 2012 01:17:54 +0100, Samuel Martin wrote:
>> Since hardware specific support is available for some given kernel
>> releases (mostly for kernel <=3.2), then disable them if kernel 3.6 is
>> enable. However, this still allows the generic driver build.
>>
>> Signed-off-by: Samuel Martin <s.martin49@gmail.com>
>> ---
>> package/igh-ethercat/Config.in | 7 ++++++-
>> 1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/package/igh-ethercat/Config.in b/package/igh-ethercat/Config.in
>> index 890bb12..4a0fd75 100644
>> --- a/package/igh-ethercat/Config.in
>> +++ b/package/igh-ethercat/Config.in
>> @@ -6,7 +6,12 @@ config BR2_PACKAGE_IGH_ETHERCAT
>>
>> http://www.etherlab.org/en/ethercat/index.php
>>
>> -if BR2_PACKAGE_IGH_ETHERCAT
>> +if BR2_PACKAGE_IGH_ETHERCAT && !BR2_LINUX_KERNEL_3_6
>> +
>> +comment "The following drivers are only available for some"
>> +comment "releases of the kernel (mostly 2.6.x)."
>> +comment "Further details about the kernel/hardware support at:"
>> +comment "http://www.etherlab.org/en/ethercat/hardware.php"
>
> I'm sorry but I don't quite understand neither the commit log nor the
> comment here. Could you explain a bit more? Is this fixing any sort of
> build problem?
You are right, it's not so clear... so lemme try to rephrase this:
igh-ethercat porvides some drivers for some specific kernel releases.
At configure time, we pass the kernel build directory.
igh-ethercat somehow finds the kernel version, then try to match it
among the available driver sources.
Here is what looks like the source tree:
z$ (cd output/build/igh-ethercat-1.5.1/ ; find devices/e1000e/ | sort
| head -n20)
devices/e1000e/
devices/e1000e/82571-2.6.32-ethercat.c
devices/e1000e/82571-2.6.32-orig.c
devices/e1000e/82571-2.6.33-ethercat.c
devices/e1000e/82571-2.6.33-orig.c
devices/e1000e/82571-2.6.34-ethercat.c
devices/e1000e/82571-2.6.34-orig.c
devices/e1000e/82571-2.6.35-ethercat.c
devices/e1000e/82571-2.6.35-orig.c
devices/e1000e/82571-2.6.37-ethercat.c
devices/e1000e/82571-2.6.37-orig.c
devices/e1000e/defines-2.6.32-ethercat.h
devices/e1000e/defines-2.6.32-orig.h
devices/e1000e/defines-2.6.33-ethercat.h
devices/e1000e/defines-2.6.33-orig.h
devices/e1000e/defines-2.6.34-ethercat.h
devices/e1000e/defines-2.6.34-orig.h
devices/e1000e/defines-2.6.35-ethercat.h
devices/e1000e/defines-2.6.35-orig.h
devices/e1000e/defines-2.6.37-ethercat.h
So whatever is your kernel release, it should match one of the
supported release listed at:
http://www.etherlab.org/en/ethercat/hardware.php
Otherwise, it fails :-/
Hope, it's clearer.
If you have any suggestion about how to rephrase both the help text
and/or the commit message,
please, share them.
Regards,
--
Sam
^ permalink raw reply
* [Buildroot] crosstools build fails when hard fpu is selected
From: Thierry Bultel @ 2012-11-22 11:18 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121122095217.7408e82a@skate>
Le 22/11/2012 09:52, Thomas Petazzoni a ?crit :
> Dear Thierry Bultel,
>
> On Thu, 22 Nov 2012 09:46:24 +0100, Thierry Bultel wrote:
>
>> I thought that is was due to the fact that the "Use soft float by
>> default" option was not available when using an external toolchain (why
>> ?) but I have the same issue when crosstol-ng is built within buildroot
>> (and the option deselected of course)
>>
>> I am still investigating, but if you have a clue I would appreciate
>
>> /home/tbultel/x-tools/arm-unknown-linux-gnueabi/lib/gcc/arm-unknown-linux-gnueabi/4.6.3/../../../../arm-unknown-linux-gnueabi/bin/ld:
>> error: ../lib/libncurses.so.5.9 uses VFP register arguments,
>> ../obj_s/hardscroll.o does not
>
> From a quick look, it smells like not everybody has been built with the
> same CFLAGS or something like that. Like part of it has been built with
> hardfp, and some other with softfp. I would think "use VFP register
> arguments" means hardfp (floating point values are passed to functions
> through the floating-point registers). So libncurses.so.5.9 would be
> hardfp, and hardscroll.o would be softfp or soft-float and that cannot
> be linked together.
>
> Are you sure you disabled BR2_SOFT_FLOAT in Buildroot? Check the entire
> build log of ncurses to see which compiler flags are being passed.
>
Yes, I am definitively sure that BR2_SOFT_FLOAT is disabled in my .config
However I have BR2_PREFER_SOFT_FLOAT=y which is automatically set.
Looking at the build log, there are no '-mfpu=' flags at all when
invoking crosstool's gcc
I do not reproduce the issue with the CodeSourcery as external
toolchain, letting me think that my crosstool configuration is
wrong.
best regards
Thierry
> Best regards,
>
> Thomas
>
^ permalink raw reply
* [Buildroot] [PATCH] barebox: use the symlink to copy the barebox binary to the images directory
From: Gregory Hermant @ 2012-11-22 12:35 UTC (permalink / raw)
To: buildroot
Barebox creates a symlink to the binary. This symlink points to
the barebox.bin or to the compressed zbarebox.bin binary.
Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
---
boot/barebox/barebox.mk | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/boot/barebox/barebox.mk b/boot/barebox/barebox.mk
index a025d5f..6cc4976 100644
--- a/boot/barebox/barebox.mk
+++ b/boot/barebox/barebox.mk
@@ -72,7 +72,11 @@ define BAREBOX_BUILD_CMDS
endef
define BAREBOX_INSTALL_IMAGES_CMDS
- cp $(@D)/barebox.bin $(BINARIES_DIR)
+ if test -h $(@D)/barebox-flash-image ; then \
+ cp -L $(@D)/barebox-flash-image $(BINARIES_DIR)/barebox.bin ; \
+ else \
+ cp $(@D)/barebox.bin $(BINARIES_DIR);\
+ fi
endef
ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
--
1.7.9.5
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox