* [Buildroot] [PATCH v2] linenoise: new package
From: Peter Korsgaard @ 2012-12-05 18:57 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354730811-14060-1-git-send-email-francois.perrad@gadz.org>
>>>>> "Francois" == Francois Perrad <fperrad@gmail.com> writes:
Francois> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] linenoise: new package
From: Peter Korsgaard @ 2012-12-05 18:56 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=d87847203f3b1b6af51515978563f0dee737b6fd
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/Config.in | 1 +
package/linenoise/Config.in | 6 +++
package/linenoise/linenoise-get-columns.patch | 20 +++++++++++
package/linenoise/linenoise.mk | 45 +++++++++++++++++++++++++
4 files changed, 72 insertions(+), 0 deletions(-)
diff --git a/package/Config.in b/package/Config.in
index f95e29d..ae94705 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -525,6 +525,7 @@ menu "Text and terminal handling"
source "package/enchant/Config.in"
source "package/icu/Config.in"
source "package/libiconv/Config.in"
+source "package/linenoise/Config.in"
source "package/ncurses/Config.in"
source "package/newt/Config.in"
source "package/pcre/Config.in"
diff --git a/package/linenoise/Config.in b/package/linenoise/Config.in
new file mode 100644
index 0000000..8e4ab91
--- /dev/null
+++ b/package/linenoise/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_LINENOISE
+ bool "linenoise"
+ help
+ A small self-contained alternative to readline and libedit
+
+ https://github.com/antirez/linenoise
diff --git a/package/linenoise/linenoise-get-columns.patch b/package/linenoise/linenoise-get-columns.patch
new file mode 100644
index 0000000..4fb9e40
--- /dev/null
+++ b/package/linenoise/linenoise-get-columns.patch
@@ -0,0 +1,20 @@
+returns the default value (80) when a real value is not available
+(0 is not an acceptable value for COLUMNS, the width of the screen).
+
+see pull request on upstream : http://github.com/antirez/linenoise/pull/31
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/linenoise.c
+===================================================================
+--- a/linenoise.c
++++ b/linenoise.c
+@@ -182,7 +182,7 @@
+ static int getColumns(void) {
+ struct winsize ws;
+
+- if (ioctl(1, TIOCGWINSZ, &ws) == -1) return 80;
++ if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) return 80;
+ return ws.ws_col;
+ }
+
diff --git a/package/linenoise/linenoise.mk b/package/linenoise/linenoise.mk
new file mode 100644
index 0000000..343a107
--- /dev/null
+++ b/package/linenoise/linenoise.mk
@@ -0,0 +1,45 @@
+#############################################################
+#
+# linenoise
+#
+#############################################################
+LINENOISE_VERSION = g8c9b481
+LINENOISE_SITE = http://github.com/antirez/linenoise/tarball/master
+LINENOISE_LICENSE = BSD-2c
+LINENOISE_INSTALL_STAGING = YES
+
+define LINENOISE_BUILD_CMDS
+ cd $(@D); $(TARGET_CC) $(TARGET_CFLAGS) -c linenoise.c
+ cd $(@D); $(TARGET_AR) rcu liblinenoise.a linenoise.o
+ cd $(@D); $(TARGET_CC) $(TARGET_LDFLAGS) -o linenoise_example example.c -L. -llinenoise
+endef
+
+define LINENOISE_INSTALL_STAGING_CMDS
+ $(INSTALL) -m 644 -D $(@D)/linenoise.h $(STAGING_DIR)/usr/include/linenoise.h
+ $(INSTALL) -m 644 -D $(@D)/liblinenoise.a $(STAGING_DIR)/usr/lib/liblinenoise.a
+ $(INSTALL) -m 755 -D $(@D)/linenoise_example $(STAGING_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_UNINSTALL_STAGING_CMDS
+ rm -f $(STAGING_DIR)/usr/include/linenoise.h
+ rm -f $(STAGING_DIR)/usr/lib/liblinenoise.a
+ rm -f $(STAGING_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_INSTALL_TARGET_CMDS
+ $(INSTALL) -m 644 -D $(@D)/linenoise.h $(TARGET_DIR)/usr/include/linenoise.h
+ $(INSTALL) -m 644 -D $(@D)/liblinenoise.a $(TARGET_DIR)/usr/lib/liblinenoise.a
+ $(INSTALL) -m 755 -D $(@D)/linenoise_example $(TARGET_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_UNINSTALL_TARGET_CMDS
+ rm -f $(TARGET_DIR)/usr/include/linenoise.h
+ rm -f $(TARGET_DIR)/usr/lib/liblinenoise.a
+ rm -f $(TARGET_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_CLEAN_CMDS
+ rm -f $(@D)/*.o $(@D)/*.a $(@D)/linenoise_example
+endef
+
+$(eval $(generic-package))
^ permalink raw reply related
* [Buildroot] Qt library difference between E.so and just .so
From: Santhosh Ramani @ 2012-12-05 18:46 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121204181948.60bfbd4e@eb-e6520>
Hello Everyone,
Thank you so much for all your replies, I tried the solution you guys
mentioned and yes it works fine. I now point to the libraries created by
buildroot and also had to point to qmake from buildroot and can run the
applications fine on my board.
How do I get touchscreen to work, the applications load fine, but there is
no touch response. I performed ts_calibrate and it works fine...so I'm
guessing there is again something to do with pointing to the correct tslib??
Thank you again for all your answers and patience :)
Regards
Santhosh
--
Greater the Difficulty....Sweeter is the Victory
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121205/f59f8804/attachment.html>
^ permalink raw reply
* [Buildroot] [PATCH v5] neardal: new package
From: spdawson at gmail.com @ 2012-12-05 18:40 UTC (permalink / raw)
To: buildroot
From: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
---
v5: Resend
v4: Incorporate Arnout Vandecappelle's suggested improvements
v3: Remove spurious dependency on neard, add Arnout Vandecappelle's acks
v2: (No v2, bumped entire patch series to v3)
package/Config.in | 1 +
package/neardal/Config.in | 12 ++++++++++++
package/neardal/neardal.mk | 16 ++++++++++++++++
3 files changed, 29 insertions(+)
create mode 100644 package/neardal/Config.in
create mode 100644 package/neardal/neardal.mk
diff --git a/package/Config.in b/package/Config.in
index 4bc5cf3..2cb9b8e 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -424,6 +424,7 @@ source "package/libusb/Config.in"
source "package/libusb-compat/Config.in"
source "package/libv4l/Config.in"
source "package/mtdev/Config.in"
+source "package/neardal/Config.in"
source "package/pcsc-lite/Config.in"
endmenu
diff --git a/package/neardal/Config.in b/package/neardal/Config.in
new file mode 100644
index 0000000..990b302
--- /dev/null
+++ b/package/neardal/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_NEARDAL
+ bool "neardal"
+ depends on BR2_USE_WCHAR # glib2
+ select BR2_PACKAGE_DBUS
+ select BR2_PACKAGE_DBUS_GLIB
+ help
+ Provides a simple C API to exchange data with the neard NFC manager daemon.
+
+ https://github.com/connectivity/neardal
+
+comment "neardal requires a toolchain with WCHAR support"
+ depends on !BR2_USE_WCHAR
diff --git a/package/neardal/neardal.mk b/package/neardal/neardal.mk
new file mode 100644
index 0000000..f898df5
--- /dev/null
+++ b/package/neardal/neardal.mk
@@ -0,0 +1,16 @@
+#############################################################
+#
+# neardal
+#
+#############################################################
+NEARDAL_VERSION = 0.7
+NEARDAL_SITE = http://github.com/connectivity/neardal/tarball/$(NEARDAL_VERSION)
+NEARDAL_SOURCE = connectivity-neardal-$(NEARDAL_VERSION).tar.gz
+NEARDAL_INSTALL_STAGING = YES
+NEARDAL_LICENSE = GPLv2
+NEARDAL_LICENSE_FILES = COPYING
+
+NEARDAL_DEPENDENCIES = dbus-glib
+NEARDAL_AUTORECONF = YES
+
+$(eval $(autotools-package))
--
1.7.10.4
^ permalink raw reply related
* [Buildroot] [PATCH v5] neard: new package
From: spdawson at gmail.com @ 2012-12-05 18:39 UTC (permalink / raw)
To: buildroot
From: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
---
v5: Resend
v4: No changes; patch series version bumped
v3: Incorporated improvements suggested by Baruch Siach,
add Arnout Vandecappelle's acks
v2: Incorporated improvements suggested by Thomas Petazzoni
package/Config.in | 1 +
package/neard/Config.in | 12 ++++++++++++
package/neard/neard.mk | 14 ++++++++++++++
3 files changed, 27 insertions(+)
create mode 100644 package/neard/Config.in
create mode 100644 package/neard/neard.mk
diff --git a/package/Config.in b/package/Config.in
index f95e29d..4bc5cf3 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -237,6 +237,7 @@ source "package/mdadm/Config.in"
source "package/memtester/Config.in"
source "package/minicom/Config.in"
source "package/nanocom/Config.in"
+source "package/neard/Config.in"
source "package/ofono/Config.in"
source "package/open2300/Config.in"
source "package/openocd/Config.in"
diff --git a/package/neard/Config.in b/package/neard/Config.in
new file mode 100644
index 0000000..a50dbeb
--- /dev/null
+++ b/package/neard/Config.in
@@ -0,0 +1,12 @@
+config BR2_PACKAGE_NEARD
+ bool "neard"
+ select BR2_PACKAGE_DBUS
+ select BR2_PACKAGE_LIBGLIB2
+ select BR2_PACKAGE_LIBNL
+ help
+ Near Field Communication (NFC) manager. This userspace daemon is a part
+ of the NFC stack provided by the Linux NFC project.
+
+ http://git.kernel.org/?p=network/nfc/neard.git;a=summary
+
+ https://01.org/linux-nfc/documentation/how-start-linux-nfc-code...
diff --git a/package/neard/neard.mk b/package/neard/neard.mk
new file mode 100644
index 0000000..28bde71
--- /dev/null
+++ b/package/neard/neard.mk
@@ -0,0 +1,14 @@
+#############################################################
+#
+# neard
+#
+#############################################################
+NEARD_VERSION = 0.8
+NEARD_SITE = $(BR2_KERNEL_MIRROR)/linux/network/nfc
+NEARD_LICENSE = GPLv2
+NEARD_LICENSE_FILES = COPYING
+
+NEARD_DEPENDENCIES = dbus libglib2 libnl
+NEARD_CONF_OPT = --disable-traces
+
+$(eval $(autotools-package))
--
1.7.10.4
^ permalink raw reply related
* [Buildroot] [git commit] jamvm: force ARM mode when building to avoid thumb2 build problems
From: Peter Korsgaard @ 2012-12-05 18:17 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=ac3ee237d96731b869eeca435e1b8351aacd245b
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/jamvm/jamvm.mk | 6 ++++++
1 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/package/jamvm/jamvm.mk b/package/jamvm/jamvm.mk
index f0765d7..3f05361 100644
--- a/package/jamvm/jamvm.mk
+++ b/package/jamvm/jamvm.mk
@@ -8,4 +8,10 @@ JAMVM_CONF_OPT = \
--disable-shared \
--without-pic
+# jamvm has ARM assembly code that cannot be compiled in Thumb2 mode,
+# so we must force traditional ARM mode.
+ifeq ($(BR2_arm),y)
+JAMVM_CONF_ENV = CFLAGS="$(TARGET_CFLAGS) -marm"
+endif
+
$(eval $(autotools-package))
^ permalink raw reply related
* [Buildroot] [PATCH v2] linenoise: new package
From: Francois Perrad @ 2012-12-05 18:06 UTC (permalink / raw)
To: buildroot
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
---
package/Config.in | 1 +
package/linenoise/Config.in | 6 ++++
package/linenoise/linenoise-get-columns.patch | 20 +++++++++++
package/linenoise/linenoise.mk | 45 +++++++++++++++++++++++++
4 files changed, 72 insertions(+)
create mode 100644 package/linenoise/Config.in
create mode 100644 package/linenoise/linenoise-get-columns.patch
create mode 100644 package/linenoise/linenoise.mk
diff --git a/package/Config.in b/package/Config.in
index e8b8cd7..2c1fba4 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -517,6 +517,7 @@ menu "Text and terminal handling"
source "package/enchant/Config.in"
source "package/icu/Config.in"
source "package/libiconv/Config.in"
+source "package/linenoise/Config.in"
source "package/ncurses/Config.in"
source "package/newt/Config.in"
source "package/pcre/Config.in"
diff --git a/package/linenoise/Config.in b/package/linenoise/Config.in
new file mode 100644
index 0000000..8e4ab91
--- /dev/null
+++ b/package/linenoise/Config.in
@@ -0,0 +1,6 @@
+config BR2_PACKAGE_LINENOISE
+ bool "linenoise"
+ help
+ A small self-contained alternative to readline and libedit
+
+ https://github.com/antirez/linenoise
diff --git a/package/linenoise/linenoise-get-columns.patch b/package/linenoise/linenoise-get-columns.patch
new file mode 100644
index 0000000..4fb9e40
--- /dev/null
+++ b/package/linenoise/linenoise-get-columns.patch
@@ -0,0 +1,20 @@
+returns the default value (80) when a real value is not available
+(0 is not an acceptable value for COLUMNS, the width of the screen).
+
+see pull request on upstream : http://github.com/antirez/linenoise/pull/31
+
+Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
+
+Index: b/linenoise.c
+===================================================================
+--- a/linenoise.c
++++ b/linenoise.c
+@@ -182,7 +182,7 @@
+ static int getColumns(void) {
+ struct winsize ws;
+
+- if (ioctl(1, TIOCGWINSZ, &ws) == -1) return 80;
++ if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) return 80;
+ return ws.ws_col;
+ }
+
diff --git a/package/linenoise/linenoise.mk b/package/linenoise/linenoise.mk
new file mode 100644
index 0000000..343a107
--- /dev/null
+++ b/package/linenoise/linenoise.mk
@@ -0,0 +1,45 @@
+#############################################################
+#
+# linenoise
+#
+#############################################################
+LINENOISE_VERSION = g8c9b481
+LINENOISE_SITE = http://github.com/antirez/linenoise/tarball/master
+LINENOISE_LICENSE = BSD-2c
+LINENOISE_INSTALL_STAGING = YES
+
+define LINENOISE_BUILD_CMDS
+ cd $(@D); $(TARGET_CC) $(TARGET_CFLAGS) -c linenoise.c
+ cd $(@D); $(TARGET_AR) rcu liblinenoise.a linenoise.o
+ cd $(@D); $(TARGET_CC) $(TARGET_LDFLAGS) -o linenoise_example example.c -L. -llinenoise
+endef
+
+define LINENOISE_INSTALL_STAGING_CMDS
+ $(INSTALL) -m 644 -D $(@D)/linenoise.h $(STAGING_DIR)/usr/include/linenoise.h
+ $(INSTALL) -m 644 -D $(@D)/liblinenoise.a $(STAGING_DIR)/usr/lib/liblinenoise.a
+ $(INSTALL) -m 755 -D $(@D)/linenoise_example $(STAGING_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_UNINSTALL_STAGING_CMDS
+ rm -f $(STAGING_DIR)/usr/include/linenoise.h
+ rm -f $(STAGING_DIR)/usr/lib/liblinenoise.a
+ rm -f $(STAGING_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_INSTALL_TARGET_CMDS
+ $(INSTALL) -m 644 -D $(@D)/linenoise.h $(TARGET_DIR)/usr/include/linenoise.h
+ $(INSTALL) -m 644 -D $(@D)/liblinenoise.a $(TARGET_DIR)/usr/lib/liblinenoise.a
+ $(INSTALL) -m 755 -D $(@D)/linenoise_example $(TARGET_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_UNINSTALL_TARGET_CMDS
+ rm -f $(TARGET_DIR)/usr/include/linenoise.h
+ rm -f $(TARGET_DIR)/usr/lib/liblinenoise.a
+ rm -f $(TARGET_DIR)/usr/bin/linenoise_example
+endef
+
+define LINENOISE_CLEAN_CMDS
+ rm -f $(@D)/*.o $(@D)/*.a $(@D)/linenoise_example
+endef
+
+$(eval $(generic-package))
--
1.7.9.5
^ permalink raw reply related
* [Buildroot] [PATCH 3/4] linenoise: new package
From: François Perrad @ 2012-12-05 18:06 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87sj7ka1t3.fsf@dell.be.48ers.dk>
2012/12/5 Peter Korsgaard <jacmet@uclibc.org>:
>>>>>> "Francois" == Francois Perrad <fperrad@gmail.com> writes:
>
> Francois> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> Francois> ---
> Francois> package/Config.in | 1 +
> Francois> package/linenoise/Config.in | 6 ++++
> Francois> package/linenoise/linenoise-get-columns.patch | 17 ++++++++++
> Francois> package/linenoise/linenoise.mk | 45 +++++++++++++++++++++++++
> Francois> 4 files changed, 69 insertions(+)
> Francois> create mode 100644 package/linenoise/Config.in
> Francois> create mode 100644 package/linenoise/linenoise-get-columns.patch
> Francois> create mode 100644 package/linenoise/linenoise.mk
>
> Francois> diff --git a/package/linenoise/linenoise-get-columns.patch b/package/linenoise/linenoise-get-columns.patch
> Francois> new file mode 100644
> Francois> index 0000000..180d1c3
> Francois> --- /dev/null
> Francois> +++ b/package/linenoise/linenoise-get-columns.patch
> Francois> @@ -0,0 +1,17 @@
> Francois> +see http://github.com/antirez/linenoise/pull/31
>
> It would still be good to describe what it does and why.
>
Ok.
>
> Francois> +
> Francois> +Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
> Francois> +
> Francois> +Index: b/linenoise.c
> Francois> +===================================================================
> Francois> +--- a/linenoise.c
> Francois> ++++ b/linenoise.c
> Francois> +@@ -182,7 +182,7 @@
> Francois> + static int getColumns(void) {
> Francois> + struct winsize ws;
> Francois> +
> Francois> +- if (ioctl(1, TIOCGWINSZ, &ws) == -1) return 80;
> Francois> ++ if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) return 80;
> Francois> + return ws.ws_col;
> Francois> + }
> Francois> +
> Francois> diff --git a/package/linenoise/linenoise.mk b/package/linenoise/linenoise.mk
> Francois> new file mode 100644
> Francois> index 0000000..e7b6124
> Francois> --- /dev/null
> Francois> +++ b/package/linenoise/linenoise.mk
> Francois> @@ -0,0 +1,45 @@
> Francois> +#############################################################
> Francois> +#
> Francois> +# linenoise
> Francois> +#
> Francois> +#############################################################
> Francois> +LINENOISE_VERSION = g8c9b481
> Francois> +LINENOISE_SITE = http://github.com/antirez/linenoise/tarball/master
> Francois> +LINENOISE_LICENSE = BSD-2c
> Francois> +LINENOISE_INSTALL_STAGING = YES
> Francois> +
> Francois> +define LINENOISE_BUILD_CMDS
> Francois> + cd $(@D); $(TARGET_CC) $(TARGET_CFLAGS) -c linenoise.c
> Francois> + cd $(@D); $(TARGET_AR) rcu liblinenoise.a linenoise.o
> Francois> + cd $(@D); $(TARGET_CC) $(TARGET_CFLAGS) -o linenoise_example example.c -L. -llinenoise
>
> Does it make sense to build and install the example? If it does, it
> should also use $(TARGET_LDFLAGS).
Fixed in v2.
Fran?ois
>
>
> --
> Bye, Peter Korsgaard
> _______________________________________________
> buildroot mailing list
> buildroot at busybox.net
> http://lists.busybox.net/mailman/listinfo/buildroot
^ permalink raw reply
* [Buildroot] [PATCH] add support for Freescale .sb format to uboot
From: Peter Korsgaard @ 2012-12-05 17:46 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121205181613.380b6492c8cfedefafae9655@kinali.ch>
>>>>> "Attila" == Attila Kinali <attila@kinali.ch> writes:
>> [Buildroot] [PATCH 2/2] u-boot: add support for u-boot.sb file format
>>
>> It was more complete than this one, because it included the dependency
>> on host-elftosb, which is needed to bring the elftosb tool built by
>> Buildroot before U-Boot uses it to generate the .sb image.
Attila> Any reason why it has not gotten into the git repo?
Not really. I don't have any imx hw here. Are you able to test it?
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH] [RFC] new target: live filesystem
From: Arnout Vandecappelle @ 2012-12-05 17:31 UTC (permalink / raw)
To: buildroot
In-Reply-To: <d3136d0b-4214-4033-82fa-be8adffe1aa8@zimbra2.corp.accelance.fr>
On 05/12/12 10:28, Jeremy Rosen wrote:
> V3 is on the way....
>
> I skip items I agree with and applied
>
>>
>>> +config BR2_TARGET_ROOTFS_LIVE_DEST
>>> + string "live image location"
>>> + depends on BR2_TARGET_ROOTFS_LIVE
>>> + default "$(BINARIES_DIR)/live"
>>> + help
>>> + The directory where the image should be stored.
>>> + this directory will be emptied and recreated, it is given
>>
>> this -> This
>>
>>> + relative to the buildroot output/images directory
>>
>> The second part of this statement is redundant (it's true for all
>> paths in the config and is not mentioned anywhere else)
>>
>
> and the whole thing is false since that path is now absolute (which makes more sense for NFS deployement)
>
> unless you want me to make it relative again... I believe absolute (whith the possibility to use env vars to find the buildroot location) makes most sense but that might be worth discussing
Like most other paths in buildroot, it's relative to $(TOP_DIR)
(i.e. the buildroot directory).
>>> +endef
>>> +
>>> +define ROOTFS_LIVE_INIT
>>> + if [ -z $(shell which sudo) ] ; then echo "sudo seems to not be
>>> installed on the host system" ; false ; fi ; \
>>
>> This really should be checked in
>> support/dependencies/dependencies.sh.
>>
>
> I didn't know about that file, but it seems to be more about dependencies for buildroot core than dependencies for a particular config option...
I forgot to add: similar to the java dependencies for classpath.
>
> otoh it's the only place where we check for stuff installed on the host (not compiled for host, natively installed on host)
>
> maybe the cleanest way to do it would be to have a virtual target
>
> ROOTFS_DEPENDS=native-xxx
>
> that would just check that "which xxx" exists on the system...
>
> that's a different patch I could have a look at if people think it's a good idea (I am not good at makefile so I have no idea if it's one line of code or if i'm going into makefile hell here...)
That's not how we work - all native dependencies are checked in
support/dependencies.
[snip]
> I could also run sudo with "fail instead of asking for a password" option, and have people add the proper line in the sudo config file to allow untar without password, but i'm not sure if it's better or worse
No, we don't want to force people to change their host config just so they
can use buildroot.
Regards,
Arnout
>
> i'll probably wait for your answer before sending V3
>
> Thx for the proofreading
>
> Regards
> J?r?my Rosen
>
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [Bug 5750] buildroot-2012.11 while building X11 for ARM, errors on xlib_libX11-1.4.2
From: Arnout Vandecappelle @ 2012-12-05 17:20 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121205075957.00AEA99A07@busybox.osuosl.org>
On 05/12/12 08:59, bugzilla at busybox.net wrote:
> https://bugs.busybox.net/show_bug.cgi?id=5750
>
> --- Comment #1 from Thomas Petazzoni<thomas.petazzoni@free-electrons.com> 2012-12-05 07:59:54 UTC ---
> For some complicated reason, using Buildroot in a directory stored under /usr
> doesn't work. We will work on fixing that, but in the mean time, please build
> from /home/something, /opt or anything else, but not from a subdirectory of
> /usr.
We should at least have a check for that...
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] add support for Freescale .sb format to uboot
From: Attila Kinali @ 2012-12-05 17:16 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121205180533.71706c56@skate>
Moin,
On Wed, 5 Dec 2012 18:05:33 +0100
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> wrote:
> [Buildroot] [PATCH 2/2] u-boot: add support for u-boot.sb file format
>
> It was more complete than this one, because it included the dependency
> on host-elftosb, which is needed to bring the elftosb tool built by
> Buildroot before U-Boot uses it to generate the .sb image.
Any reason why it has not gotten into the git repo?
Attila Kinali
--
There is no secret ingredient
-- Po, Kung Fu Panda
^ permalink raw reply
* [Buildroot] How to handle modularity in buildroot?
From: Arnout Vandecappelle @ 2012-12-05 17:14 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAE21AQp9tsnrS=uR0BoOuYi15Vew=swx24FapMC7Fyi+W0E3+A@mail.gmail.com>
On 04/12/12 19:18, Charles Manning wrote:
>> > And then, when you want to do a production build:
>> >
>> > make clean
>> > cat mysystem_base_defconfig.frag mysystem_prod_defconfig.frag> configs/mysystem_prod_defconfig
>> > make mysystem_prod_defconfig
>> > make
>> >
>> > And when you want to do a development build:
>> >
>> > make clean
>> > cat mysystem_base_defconfig.frag mysystem_dev_defconfig.frag> configs/mysystem_dev_defconfig
>> > make mysystem_dev_defconfig
>> > make
>> >
>> > Basically, instead of having Buildroot providing this feature, we rely
>> > on the simple manipulation of the configuration file.
> This sounds like the right idea.
>
> I will experiment with this a bit and see where it takes me. If there
> is something worth sharing I'll do that.
If you don't want to clobber your buildroot tree with
configs/mysystem_dev_defconfig, you can instead do:
make clean
cat mysystem_base_defconfig.frag mysystem_dev_defconfig.frag > /tmp/mysystem_dev_defconfig
make defconfig BR2_DEFCONFIG=/tmp/mysystem_dev_defconfig
make
And to create the _dev fragment, you can try something like:
make savedefconfig
sort defconfig mysystem_base_defconfig.frag | uniq -u > mysystem_dev_defconfig.frag
(this is just from the top of my head so YMMV).
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] add support for Freescale .sb format to uboot
From: Thomas Petazzoni @ 2012-12-05 17:05 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAEnpE0yzcer9dNew-6yfwmjf+L+a=Kgrf-tZ++Y2gMRcwmGYLw@mail.gmail.com>
Dear Gary Coulbourne,
On Wed, 5 Dec 2012 11:48:27 -0500, Gary Coulbourne wrote:
> This patch offers the option to build u-boot.sb
We had a patch sent in March this year adding support for u-boot.sb:
[Buildroot] [PATCH 2/2] u-boot: add support for u-boot.sb file format
It was more complete than this one, because it included the dependency
on host-elftosb, which is needed to bring the elftosb tool built by
Buildroot before U-Boot uses it to generate the .sb image.
Best regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH] libevent: Add Gentoo patch for C libraries without the sysctl syscall
From: Markos Chandras @ 2012-12-05 17:03 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87obi8a1cl.fsf@dell.be.48ers.dk>
On 5 December 2012 16:51, Peter Korsgaard <jacmet@uclibc.org> wrote:
>>>>>> "Markos" == Markos Chandras <markos.chandras@gmail.com> writes:
>
> Hi,
>
> >> +++ b/package/libevent/libevent-sysctl.patch
> >> @@ -0,0 +1,46 @@
> >> +Add Gentoo fix for C libraries that lack the sysctl system call
> >> +http://sources2.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/dev-libs/libevent/files/libevent-2.0.16-sysctl.patch?revision=1.1
> >> +This patch has already been commited upstream
> >> +
> >> +Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
> >> +
> >> +From 358c745e5432f7648b6f8b3188f32b5551cbf9d6 Mon Sep 17 00:00:00 2001
> >> +From: Mike Frysinger <vapier@gentoo.org>
> >> +Date: Thu, 8 Dec 2011 11:39:48 -0500
> >> +Subject: [PATCH] check for sysctl before we use it
> >> +
> >> +Not all C libraries under Linux support the sysctl() func.
>
> Markos> Ping? :-)
>
> What archs (in Buildroot context) are affected by this?
>
> --
> Bye, Peter Korsgaard
Hi Peter,
All of the existing architectures in buildroot support the sysctl
syscall. However, this patch will not cause any problem
for these architectures anyway.
--
Regards,
Markos
^ permalink raw reply
* [Buildroot] target not ping-able
From: Arnout Vandecappelle @ 2012-12-05 17:03 UTC (permalink / raw)
To: buildroot
In-Reply-To: <slrnkbqvei.uot.narkewoody@zuhnb712.local.com>
On 04/12/12 05:37, Woody Wu wrote:
> Hi, list
>
> My generated target system (kernel and rootfs) is not ping-able. From
> the target I can ping outside, but hosts, even on the same ethernet
> subnetwork cannot ping my target.
>
> The kernel is 3.4.19 and I enabled network options and an Ethernet
> driver. Is there anything I missed?
This is unlikely to be buildroot-related...
I would do a wireshark on the host to get more insight. You can also build
a tcpdump for the target to verify if it even receives anything. Also try with
a direct cable between host and target and static IP addresses, to rule out any
influence of the switch. And one final thing I can think of is that there is
some netfilter rule that disallows ping replies.
Regards,
Arnout
--
Arnout Vandecappelle arnout at mind be
Senior Embedded Software Architect +32-16-286540
Essensium/Mind http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint: 7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
^ permalink raw reply
* [Buildroot] [PATCH] libevent: Add Gentoo patch for C libraries without the sysctl syscall
From: Peter Korsgaard @ 2012-12-05 16:51 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAG2jQ8ga3RoFPshV5x7Fad4rVCnp_aiq9My_HpqPqU1w1Ri-Cg@mail.gmail.com>
>>>>> "Markos" == Markos Chandras <markos.chandras@gmail.com> writes:
Hi,
>> +++ b/package/libevent/libevent-sysctl.patch
>> @@ -0,0 +1,46 @@
>> +Add Gentoo fix for C libraries that lack the sysctl system call
>> +http://sources2.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/dev-libs/libevent/files/libevent-2.0.16-sysctl.patch?revision=1.1
>> +This patch has already been commited upstream
>> +
>> +Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
>> +
>> +From 358c745e5432f7648b6f8b3188f32b5551cbf9d6 Mon Sep 17 00:00:00 2001
>> +From: Mike Frysinger <vapier@gentoo.org>
>> +Date: Thu, 8 Dec 2011 11:39:48 -0500
>> +Subject: [PATCH] check for sysctl before we use it
>> +
>> +Not all C libraries under Linux support the sysctl() func.
Markos> Ping? :-)
What archs (in Buildroot context) are affected by this?
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH] add support for Freescale .sb format to uboot
From: Gary Coulbourne @ 2012-12-05 16:48 UTC (permalink / raw)
To: buildroot
This patch offers the option to build u-boot.sb
---
boot/uboot/Config.in | 4 ++++
boot/uboot/uboot.mk | 3 +++
2 files changed, 7 insertions(+)
diff --git a/boot/uboot/Config.in b/boot/uboot/Config.in
index d8458d9..9b7a3b0 100644
--- a/boot/uboot/Config.in
+++ b/boot/uboot/Config.in
@@ -94,6 +94,10 @@ config BR2_TARGET_UBOOT_FORMAT_AIS
It is required to load code/data on OMAP-L1 processors.
u-boot.ais contains U-Boot with the SPL support.
+config BR2_TARGET_UBOOT_FORMAT_SB
+ depends on BR2_arm
+ bool "u-boot.sb"
+
config BR2_TARGET_UBOOT_FORMAT_BIN
bool "u-boot.bin"
diff --git a/boot/uboot/uboot.mk b/boot/uboot/uboot.mk
index 619f2e1..4a98583 100644
--- a/boot/uboot/uboot.mk
+++ b/boot/uboot/uboot.mk
@@ -37,6 +37,9 @@ else ifeq ($(BR2_TARGET_UBOOT_FORMAT_NAND_BIN),y)
UBOOT_BIN = u-boot-nand.bin
else ifeq ($(BR2_TARGET_UBOOT_FORMAT_IMG),y)
UBOOT_BIN = u-boot.img
+else ifeq ($(BR2_TARGET_UBOOT_FORMAT_SB),y)
+UBOOT_BIN = u-boot.sb
+UBOOT_MAKE_TARGET = $(UBOOT_BIN)
else
UBOOT_BIN = u-boot.bin
UBOOT_BIN_IFT = $(UBOOT_BIN).ift
--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.busybox.net/pipermail/buildroot/attachments/20121205/9181a361/attachment.html>
^ permalink raw reply related
* [Buildroot] [PATCH 3/4] linenoise: new package
From: Peter Korsgaard @ 2012-12-05 16:42 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354551135-30056-3-git-send-email-francois.perrad@gadz.org>
>>>>> "Francois" == Francois Perrad <fperrad@gmail.com> writes:
Francois> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Francois> ---
Francois> package/Config.in | 1 +
Francois> package/linenoise/Config.in | 6 ++++
Francois> package/linenoise/linenoise-get-columns.patch | 17 ++++++++++
Francois> package/linenoise/linenoise.mk | 45 +++++++++++++++++++++++++
Francois> 4 files changed, 69 insertions(+)
Francois> create mode 100644 package/linenoise/Config.in
Francois> create mode 100644 package/linenoise/linenoise-get-columns.patch
Francois> create mode 100644 package/linenoise/linenoise.mk
Francois> diff --git a/package/linenoise/linenoise-get-columns.patch b/package/linenoise/linenoise-get-columns.patch
Francois> new file mode 100644
Francois> index 0000000..180d1c3
Francois> --- /dev/null
Francois> +++ b/package/linenoise/linenoise-get-columns.patch
Francois> @@ -0,0 +1,17 @@
Francois> +see http://github.com/antirez/linenoise/pull/31
It would still be good to describe what it does and why.
Francois> +
Francois> +Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Francois> +
Francois> +Index: b/linenoise.c
Francois> +===================================================================
Francois> +--- a/linenoise.c
Francois> ++++ b/linenoise.c
Francois> +@@ -182,7 +182,7 @@
Francois> + static int getColumns(void) {
Francois> + struct winsize ws;
Francois> +
Francois> +- if (ioctl(1, TIOCGWINSZ, &ws) == -1) return 80;
Francois> ++ if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) return 80;
Francois> + return ws.ws_col;
Francois> + }
Francois> +
Francois> diff --git a/package/linenoise/linenoise.mk b/package/linenoise/linenoise.mk
Francois> new file mode 100644
Francois> index 0000000..e7b6124
Francois> --- /dev/null
Francois> +++ b/package/linenoise/linenoise.mk
Francois> @@ -0,0 +1,45 @@
Francois> +#############################################################
Francois> +#
Francois> +# linenoise
Francois> +#
Francois> +#############################################################
Francois> +LINENOISE_VERSION = g8c9b481
Francois> +LINENOISE_SITE = http://github.com/antirez/linenoise/tarball/master
Francois> +LINENOISE_LICENSE = BSD-2c
Francois> +LINENOISE_INSTALL_STAGING = YES
Francois> +
Francois> +define LINENOISE_BUILD_CMDS
Francois> + cd $(@D); $(TARGET_CC) $(TARGET_CFLAGS) -c linenoise.c
Francois> + cd $(@D); $(TARGET_AR) rcu liblinenoise.a linenoise.o
Francois> + cd $(@D); $(TARGET_CC) $(TARGET_CFLAGS) -o linenoise_example example.c -L. -llinenoise
Does it make sense to build and install the example? If it does, it
should also use $(TARGET_LDFLAGS).
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH 2/4] luajit: bump to version 2.0.0
From: Peter Korsgaard @ 2012-12-05 16:39 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354551135-30056-2-git-send-email-francois.perrad@gadz.org>
>>>>> "Francois" == Francois Perrad <fperrad@gmail.com> writes:
Francois> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [PATCH 1/4] perl: bump to version 5.16.2
From: Peter Korsgaard @ 2012-12-05 16:39 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354551135-30056-1-git-send-email-francois.perrad@gadz.org>
>>>>> "Francois" == Francois Perrad <fperrad@gmail.com> writes:
Francois> Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] luajit: bump to version 2.0.0
From: Peter Korsgaard @ 2012-12-05 16:37 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=fa0cea21cdee6c5ac46fba3cceb989419083a432
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/luajit/luajit-01-root-path.patch | 2 +-
package/luajit/luajit-04-no-bin-symlink.patch | 18 ++----------------
package/luajit/luajit.mk | 2 +-
3 files changed, 4 insertions(+), 18 deletions(-)
diff --git a/package/luajit/luajit-01-root-path.patch b/package/luajit/luajit-01-root-path.patch
index 80ad1e9..cc2f04f 100644
--- a/package/luajit/luajit-01-root-path.patch
+++ b/package/luajit/luajit-01-root-path.patch
@@ -18,5 +18,5 @@ Index: b/src/luaconf.h
+#define LUA_LDIR LUA_ROOT "share/lua/"
+#define LUA_CDIR LUA_ROOT "lib/lua/"
#ifdef LUA_XROOT
- #define LUA_JDIR LUA_XROOT "share/luajit-2.0.0-beta11/"
+ #define LUA_JDIR LUA_XROOT "share/luajit-2.0.0/"
#define LUA_XPATH \
diff --git a/package/luajit/luajit-04-no-bin-symlink.patch b/package/luajit/luajit-04-no-bin-symlink.patch
index 91a470a..0de3162 100644
--- a/package/luajit/luajit-04-no-bin-symlink.patch
+++ b/package/luajit/luajit-04-no-bin-symlink.patch
@@ -6,7 +6,7 @@ Index: b/Makefile
===================================================================
--- a/Makefile
+++ b/Makefile
-@@ -43,8 +43,7 @@
+@@ -42,8 +42,7 @@
INSTALL_MAN= $(INSTALL_SHARE)/man/man1
INSTALL_PKGCONFIG= $(INSTALL_LIB)/pkgconfig
@@ -16,7 +16,7 @@ Index: b/Makefile
INSTALL_ANAME= libluajit-$(ABIVER).a
INSTALL_SONAME= libluajit-$(ABIVER).so.$(MAJVER).$(MINVER).$(RELVER)
INSTALL_SOSHORT= libluajit-$(ABIVER).so
-@@ -58,7 +57,6 @@
+@@ -57,7 +56,6 @@
INSTALL_SHORT1= $(INSTALL_LIB)/$(INSTALL_SOSHORT)
INSTALL_SHORT2= $(INSTALL_LIB)/$(INSTALL_SOSHORT)
INSTALL_T= $(INSTALL_BIN)/$(INSTALL_TNAME)
@@ -24,17 +24,3 @@ Index: b/Makefile
INSTALL_PC= $(INSTALL_PKGCONFIG)/$(INSTALL_PCNAME)
INSTALL_DIRS= $(INSTALL_BIN) $(INSTALL_LIB) $(INSTALL_INC) $(INSTALL_MAN) \
-@@ -120,13 +118,6 @@
- $(RM) $(FILE_PC).tmp
- cd src && $(INSTALL_F) $(FILES_INC) $(INSTALL_INC)
- cd src/jit && $(INSTALL_F) $(FILES_JITLIB) $(INSTALL_JITLIB)
-- @echo "==== Successfully installed LuaJIT $(VERSION) to $(PREFIX) ===="
-- @echo ""
-- @echo "Note: the beta releases deliberately do NOT install a symlink for luajit"
-- @echo "You can do this now by running this command (with sudo):"
-- @echo ""
-- @echo " $(SYMLINK) $(INSTALL_TNAME) $(INSTALL_TSYM)"
-- @echo ""
-
- uninstall:
- @echo "==== Uninstalling LuaJIT $(VERSION) from $(PREFIX) ===="
diff --git a/package/luajit/luajit.mk b/package/luajit/luajit.mk
index 2583f92..844122e 100644
--- a/package/luajit/luajit.mk
+++ b/package/luajit/luajit.mk
@@ -4,7 +4,7 @@
#
#############################################################
-LUAJIT_VERSION = 2.0.0-beta11
+LUAJIT_VERSION = 2.0.0
LUAJIT_SOURCE = LuaJIT-$(LUAJIT_VERSION).tar.gz
LUAJIT_SITE = http://luajit.org/download
LUAJIT_LICENSE = MIT
^ permalink raw reply related
* [Buildroot] [git commit] perl: bump to version 5.16.2
From: Peter Korsgaard @ 2012-12-05 16:37 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=f44221c4598e3f5d96b7004b6b3fdb42edc08b0e
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/perl/perl.mk | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/perl/perl.mk b/package/perl/perl.mk
index 391047d..a86ee2a 100644
--- a/package/perl/perl.mk
+++ b/package/perl/perl.mk
@@ -5,7 +5,7 @@
#############################################################
PERL_VERSION_MAJOR = 16
-PERL_VERSION = 5.$(PERL_VERSION_MAJOR).1
+PERL_VERSION = 5.$(PERL_VERSION_MAJOR).2
PERL_SITE = http://www.cpan.org/src/5.0
PERL_SOURCE = perl-$(PERL_VERSION).tar.bz2
PERL_LICENSE = Artistic
^ permalink raw reply related
* [Buildroot] elfutils and the perf userspace tool
From: Thomas Petazzoni @ 2012-12-05 15:31 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354720073.28172.YahooMailNeo@web120306.mail.ne1.yahoo.com>
Dear Bogdan Radulescu,
On Wed, 5 Dec 2012 07:07:53 -0800 (PST), Bogdan Radulescu wrote:
> I had a look at the yoctoproject patches and they are a bit confusing
> to me. There are way to many patches. Some of them fix problems I
> don't have and are very old. I decided to go with Stefans suggestions
> and I could go further, but now I am stuck again. Yes, I am using
> uClibc. Do you guys have a suggestion for this:
> http://pastie.org/pastes/5484094/text
>
> I would really like to have perf in buildroot and this thing is in
> the way.
Did you notice that you can build perf without libelf, by passing
NO_LIBELF=1 to perf's Makefile?
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [PATCH] package/crosstool-ng: update to 1.17.0
From: Peter Korsgaard @ 2012-12-05 15:30 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1354564065-24388-2-git-send-email-c.schoenert@t-online.de>
>>>>> "Carsten" == Carsten Schoenert <c.schoenert@gmail.com> writes:
Carsten> From: Carsten Schoenert <c.schoenert@t-online.de>
Carsten> Updating current crosstool-ng config files to 1.17.0
Carsten> crosstool-ng.config-eglibc
Carsten> crosstool-ng.config-glibc
Carsten> crosstool-ng.config-uClibc
Committed, thanks.
The change to defconfig can happen later.
Carsten> #
Carsten> # C compiler
Carsten> @@ -242,6 +267,7 @@ CT_BINUTILS_EXTRA_CONFIG_ARRAY=""
Carsten> CT_CC="gcc"
Carsten> CT_CC_VERSION="4.4.6"
It would also be nice to default to gcc 4.6.x to match the internal
toolchain.
--
Bye, Peter Korsgaard
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox