* [Buildroot] buildroot 2012.11 large file support
From: Willy Lambert @ 2012-12-11 8:43 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87lid5oyr5.fsf@dell.be.48ers.dk>
2012/12/11 Peter Korsgaard <jacmet@uclibc.org>:
>>>>>> "Willy" == Willy Lambert <lambert.willy@gmail.com> writes:
>
> Willy> Yes, so I just quit it so it leaves the default config (which
> Willy> seems to have a problem with large file)
> >>
> >> Ok, that also works here:
> >>
> >> yes '' | make oldconfig
> >> make
>
> Does that work for you?
>
> >> Notice that we have a bunch of preconfigured qemu defconfigs (look in
> >> configs/)
> >>
>
> Willy> thanks for this tips I overlooked that. I'm on a x86 atom so
> Willy> there is little config to preset.
>
> Is your build machine an atom? If so, beware that your build times are
> going to be quite long. Don't you have access to any faster machines?
>
Sorry, I was not clear. My *target* is an atom N450 on a PCM-3362
Advantech board :
http://www.advantech.com/products/PCM-3362/mod_2B69DA4C-D506-4AEA-8CC3-F6E58E3CBC87.aspx
If by chance anyone here has worked on this...
My build machine is a quad i5, a bit overclocked, the compilation time
is reasonable.
But for time being I'm just trying to compile a "default" buildroot
and run in into qemu.
(btw I have difficulties to put my RFS, in tgz format (cause it's the
default) into a .img file, is there any Buildroot hints for this, or
should I switch to other "RFS image output format")
> --
> Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [autobuild.buildroot.net] Build results for 2012-12-10
From: Thomas Petazzoni @ 2012-12-11 7:34 UTC (permalink / raw)
To: buildroot
Hello,
On 2012-12-10, 195 random build tests have been done and
submitted on autobuild.buildroot.net.
106 builds have been successful
89 builds have failed
Below the results of the failed builds. Successful builds are omitted.
Build e2dc47cbeb303a36d0b64fde3eb9ef6f7811f5ae
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-10 00:16:53
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=941963d258cac48f06c1be49169d81645c5e505c
End of log : http://autobuild.buildroot.net/results/e2dc47cbeb303a36d0b64fde3eb9ef6f7811f5ae/build-end.log
Complete log : http://autobuild.buildroot.net/results/e2dc47cbeb303a36d0b64fde3eb9ef6f7811f5ae/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/e2dc47cbeb303a36d0b64fde3eb9ef6f7811f5ae/config
Defconfig : http://autobuild.buildroot.net/results/e2dc47cbeb303a36d0b64fde3eb9ef6f7811f5ae/defconfig
Build af220853987e2e23c1f33bdadb50c389f649f4c6
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 00:20:26
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/af220853987e2e23c1f33bdadb50c389f649f4c6/build-end.log
Complete log : http://autobuild.buildroot.net/results/af220853987e2e23c1f33bdadb50c389f649f4c6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/af220853987e2e23c1f33bdadb50c389f649f4c6/config
Defconfig : http://autobuild.buildroot.net/results/af220853987e2e23c1f33bdadb50c389f649f4c6/defconfig
Build 28c60916b7acc9e6b39cbb5575a473e784155196
==============================================
Status : NOK
Failure reason : libnss-3.12.9
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 00:22:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/28c60916b7acc9e6b39cbb5575a473e784155196/build-end.log
Complete log : http://autobuild.buildroot.net/results/28c60916b7acc9e6b39cbb5575a473e784155196/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/28c60916b7acc9e6b39cbb5575a473e784155196/config
Defconfig : http://autobuild.buildroot.net/results/28c60916b7acc9e6b39cbb5575a473e784155196/defconfig
Build 60c9d2bdc6f1c6f0a14c3eac6d1546f8cb66d6fb
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : mipsel
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 00:42:20
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/60c9d2bdc6f1c6f0a14c3eac6d1546f8cb66d6fb/build-end.log
Complete log : http://autobuild.buildroot.net/results/60c9d2bdc6f1c6f0a14c3eac6d1546f8cb66d6fb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/60c9d2bdc6f1c6f0a14c3eac6d1546f8cb66d6fb/config
Defconfig : http://autobuild.buildroot.net/results/60c9d2bdc6f1c6f0a14c3eac6d1546f8cb66d6fb/defconfig
Build ac9aad84feafdbd30cfda4160d38ca3112c9aeb7
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 00:54:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/ac9aad84feafdbd30cfda4160d38ca3112c9aeb7/build-end.log
Complete log : http://autobuild.buildroot.net/results/ac9aad84feafdbd30cfda4160d38ca3112c9aeb7/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ac9aad84feafdbd30cfda4160d38ca3112c9aeb7/config
Defconfig : http://autobuild.buildroot.net/results/ac9aad84feafdbd30cfda4160d38ca3112c9aeb7/defconfig
Build 1750f8f68d55a78958386c4e127da732ac174ac8
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : i686
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 00:57:02
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/1750f8f68d55a78958386c4e127da732ac174ac8/build-end.log
Complete log : http://autobuild.buildroot.net/results/1750f8f68d55a78958386c4e127da732ac174ac8/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/1750f8f68d55a78958386c4e127da732ac174ac8/config
Defconfig : http://autobuild.buildroot.net/results/1750f8f68d55a78958386c4e127da732ac174ac8/defconfig
Build 6d7e387200a784288adae194935e5fcd26898700
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 01:06:06
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/6d7e387200a784288adae194935e5fcd26898700/build-end.log
Complete log : http://autobuild.buildroot.net/results/6d7e387200a784288adae194935e5fcd26898700/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6d7e387200a784288adae194935e5fcd26898700/config
Defconfig : http://autobuild.buildroot.net/results/6d7e387200a784288adae194935e5fcd26898700/defconfig
Build 4f17a1a4d25084e87d49d44a4bec9a34d0df9b42
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 01:08:40
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/4f17a1a4d25084e87d49d44a4bec9a34d0df9b42/build-end.log
Complete log : http://autobuild.buildroot.net/results/4f17a1a4d25084e87d49d44a4bec9a34d0df9b42/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/4f17a1a4d25084e87d49d44a4bec9a34d0df9b42/config
Defconfig : http://autobuild.buildroot.net/results/4f17a1a4d25084e87d49d44a4bec9a34d0df9b42/defconfig
Build 289c3177913105f63894fc5b4e7baeea344cfaaf
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 01:26:47
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/289c3177913105f63894fc5b4e7baeea344cfaaf/build-end.log
Complete log : http://autobuild.buildroot.net/results/289c3177913105f63894fc5b4e7baeea344cfaaf/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/289c3177913105f63894fc5b4e7baeea344cfaaf/config
Defconfig : http://autobuild.buildroot.net/results/289c3177913105f63894fc5b4e7baeea344cfaaf/defconfig
Build 56f0264dbe9a4404dd085b5f13736d00256e911d
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 01:33:51
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/56f0264dbe9a4404dd085b5f13736d00256e911d/build-end.log
Complete log : http://autobuild.buildroot.net/results/56f0264dbe9a4404dd085b5f13736d00256e911d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/56f0264dbe9a4404dd085b5f13736d00256e911d/config
Defconfig : http://autobuild.buildroot.net/results/56f0264dbe9a4404dd085b5f13736d00256e911d/defconfig
Build 146a7b20fd58b4829db729394de8e0383164849a
==============================================
Status : NOK
Failure reason : madplay-0.15.2b
Architecture : i686
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 01:47:43
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/146a7b20fd58b4829db729394de8e0383164849a/build-end.log
Complete log : http://autobuild.buildroot.net/results/146a7b20fd58b4829db729394de8e0383164849a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/146a7b20fd58b4829db729394de8e0383164849a/config
Defconfig : http://autobuild.buildroot.net/results/146a7b20fd58b4829db729394de8e0383164849a/defconfig
Build 60f38c2a584c0973d6aa3dabd3c6a4d3c46159eb
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 02:09:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/60f38c2a584c0973d6aa3dabd3c6a4d3c46159eb/build-end.log
Complete log : http://autobuild.buildroot.net/results/60f38c2a584c0973d6aa3dabd3c6a4d3c46159eb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/60f38c2a584c0973d6aa3dabd3c6a4d3c46159eb/config
Defconfig : http://autobuild.buildroot.net/results/60f38c2a584c0973d6aa3dabd3c6a4d3c46159eb/defconfig
Build 44bc7e8b0a25ecfb096181d99ac4a68dd3894145
==============================================
Status : NOK
Failure reason : qt-4.8.3
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 02:23:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/44bc7e8b0a25ecfb096181d99ac4a68dd3894145/build-end.log
Complete log : http://autobuild.buildroot.net/results/44bc7e8b0a25ecfb096181d99ac4a68dd3894145/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/44bc7e8b0a25ecfb096181d99ac4a68dd3894145/config
Defconfig : http://autobuild.buildroot.net/results/44bc7e8b0a25ecfb096181d99ac4a68dd3894145/defconfig
Build 6cef4a94568cdf4d89090102092451e7b184cdb4
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-10 02:35:51
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/6cef4a94568cdf4d89090102092451e7b184cdb4/build-end.log
Complete log : http://autobuild.buildroot.net/results/6cef4a94568cdf4d89090102092451e7b184cdb4/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6cef4a94568cdf4d89090102092451e7b184cdb4/config
Defconfig : http://autobuild.buildroot.net/results/6cef4a94568cdf4d89090102092451e7b184cdb4/defconfig
Build 19a9c528e508a63884a3d80c1529ab599282b68e
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 03:11:19
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/19a9c528e508a63884a3d80c1529ab599282b68e/build-end.log
Complete log : http://autobuild.buildroot.net/results/19a9c528e508a63884a3d80c1529ab599282b68e/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/19a9c528e508a63884a3d80c1529ab599282b68e/config
Defconfig : http://autobuild.buildroot.net/results/19a9c528e508a63884a3d80c1529ab599282b68e/defconfig
Build 7e8c1cd5890c3f5e4a1f8305d8b39c41153b5337
==============================================
Status : NOK
Failure reason : ltrace-0.7.2
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 03:12:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/7e8c1cd5890c3f5e4a1f8305d8b39c41153b5337/build-end.log
Complete log : http://autobuild.buildroot.net/results/7e8c1cd5890c3f5e4a1f8305d8b39c41153b5337/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/7e8c1cd5890c3f5e4a1f8305d8b39c41153b5337/config
Defconfig : http://autobuild.buildroot.net/results/7e8c1cd5890c3f5e4a1f8305d8b39c41153b5337/defconfig
Build a12145c0b4adc29d90bb1e02caddeae0a10cff06
==============================================
Status : NOK
Failure reason : ltrace-0.7.2
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 03:20:43
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/a12145c0b4adc29d90bb1e02caddeae0a10cff06/build-end.log
Complete log : http://autobuild.buildroot.net/results/a12145c0b4adc29d90bb1e02caddeae0a10cff06/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a12145c0b4adc29d90bb1e02caddeae0a10cff06/config
Defconfig : http://autobuild.buildroot.net/results/a12145c0b4adc29d90bb1e02caddeae0a10cff06/defconfig
Build d47473ac1159f88be5a609b4163e50df97474488
==============================================
Status : NOK
Failure reason : matchbox-desktop-0.9.1
Architecture : i686
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 03:32:55
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/d47473ac1159f88be5a609b4163e50df97474488/build-end.log
Complete log : http://autobuild.buildroot.net/results/d47473ac1159f88be5a609b4163e50df97474488/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/d47473ac1159f88be5a609b4163e50df97474488/config
Defconfig : http://autobuild.buildroot.net/results/d47473ac1159f88be5a609b4163e50df97474488/defconfig
Build 369be6a1f3dd559266eea44932ea69a043d3b062
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 03:41:07
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/369be6a1f3dd559266eea44932ea69a043d3b062/build-end.log
Complete log : http://autobuild.buildroot.net/results/369be6a1f3dd559266eea44932ea69a043d3b062/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/369be6a1f3dd559266eea44932ea69a043d3b062/config
Defconfig : http://autobuild.buildroot.net/results/369be6a1f3dd559266eea44932ea69a043d3b062/defconfig
Build ab2fe55be8fbf26b0f5476b521e91fe5592ab53a
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : mips64el
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 04:10:18
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/ab2fe55be8fbf26b0f5476b521e91fe5592ab53a/build-end.log
Complete log : http://autobuild.buildroot.net/results/ab2fe55be8fbf26b0f5476b521e91fe5592ab53a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ab2fe55be8fbf26b0f5476b521e91fe5592ab53a/config
Defconfig : http://autobuild.buildroot.net/results/ab2fe55be8fbf26b0f5476b521e91fe5592ab53a/defconfig
Build 8c2d9c4d98fad9b0e9b21b41bb0ab4b3d8ee3ecc
==============================================
Status : NOK
Failure reason : ltrace-0.7.2
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 04:27:37
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/8c2d9c4d98fad9b0e9b21b41bb0ab4b3d8ee3ecc/build-end.log
Complete log : http://autobuild.buildroot.net/results/8c2d9c4d98fad9b0e9b21b41bb0ab4b3d8ee3ecc/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8c2d9c4d98fad9b0e9b21b41bb0ab4b3d8ee3ecc/config
Defconfig : http://autobuild.buildroot.net/results/8c2d9c4d98fad9b0e9b21b41bb0ab4b3d8ee3ecc/defconfig
Build 73dbf68af7002b5fa0195bfcc1f15010fad231f9
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : i686
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 04:38:58
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/73dbf68af7002b5fa0195bfcc1f15010fad231f9/build-end.log
Complete log : http://autobuild.buildroot.net/results/73dbf68af7002b5fa0195bfcc1f15010fad231f9/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/73dbf68af7002b5fa0195bfcc1f15010fad231f9/config
Defconfig : http://autobuild.buildroot.net/results/73dbf68af7002b5fa0195bfcc1f15010fad231f9/defconfig
Build 5785dd7e0949bf65a6472ae4f2ae37dbaab8bb75
==============================================
Status : NOK
Failure reason : imagemagick-6.7.8-8
Architecture : sh4
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 04:57:55
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/5785dd7e0949bf65a6472ae4f2ae37dbaab8bb75/build-end.log
Complete log : http://autobuild.buildroot.net/results/5785dd7e0949bf65a6472ae4f2ae37dbaab8bb75/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5785dd7e0949bf65a6472ae4f2ae37dbaab8bb75/config
Defconfig : http://autobuild.buildroot.net/results/5785dd7e0949bf65a6472ae4f2ae37dbaab8bb75/defconfig
Build f3215dab3abbb6a77398fefff0be602ee03dfb3b
==============================================
Status : NOK
Failure reason : libnl-3.2.16
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 05:00:24
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/f3215dab3abbb6a77398fefff0be602ee03dfb3b/build-end.log
Complete log : http://autobuild.buildroot.net/results/f3215dab3abbb6a77398fefff0be602ee03dfb3b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f3215dab3abbb6a77398fefff0be602ee03dfb3b/config
Defconfig : http://autobuild.buildroot.net/results/f3215dab3abbb6a77398fefff0be602ee03dfb3b/defconfig
Build 3118bbe9cc573c4f544505d1a6e5aaf31d1ba994
==============================================
Status : NOK
Failure reason : directfb-1.4.17
Architecture : mips64el
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 05:20:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/3118bbe9cc573c4f544505d1a6e5aaf31d1ba994/build-end.log
Complete log : http://autobuild.buildroot.net/results/3118bbe9cc573c4f544505d1a6e5aaf31d1ba994/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3118bbe9cc573c4f544505d1a6e5aaf31d1ba994/config
Defconfig : http://autobuild.buildroot.net/results/3118bbe9cc573c4f544505d1a6e5aaf31d1ba994/defconfig
Build c14032685529a70f9cdcd89c31599c32ae8f7b2a
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 06:01:22
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/c14032685529a70f9cdcd89c31599c32ae8f7b2a/build-end.log
Complete log : http://autobuild.buildroot.net/results/c14032685529a70f9cdcd89c31599c32ae8f7b2a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/c14032685529a70f9cdcd89c31599c32ae8f7b2a/config
Defconfig : http://autobuild.buildroot.net/results/c14032685529a70f9cdcd89c31599c32ae8f7b2a/defconfig
Build f4562e579df3cf188e732f8651eb29f545d680a6
==============================================
Status : NOK
Failure reason : ltrace-0.7.2
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 06:10:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/f4562e579df3cf188e732f8651eb29f545d680a6/build-end.log
Complete log : http://autobuild.buildroot.net/results/f4562e579df3cf188e732f8651eb29f545d680a6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f4562e579df3cf188e732f8651eb29f545d680a6/config
Defconfig : http://autobuild.buildroot.net/results/f4562e579df3cf188e732f8651eb29f545d680a6/defconfig
Build a7e86e674b6c491780dfb572b7d21a35fdbc3c74
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 06:11:10
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/a7e86e674b6c491780dfb572b7d21a35fdbc3c74/build-end.log
Complete log : http://autobuild.buildroot.net/results/a7e86e674b6c491780dfb572b7d21a35fdbc3c74/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a7e86e674b6c491780dfb572b7d21a35fdbc3c74/config
Defconfig : http://autobuild.buildroot.net/results/a7e86e674b6c491780dfb572b7d21a35fdbc3c74/defconfig
Build fcdcc5479cda2c010ef32a76df2f98455594da5c
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 06:22:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/fcdcc5479cda2c010ef32a76df2f98455594da5c/build-end.log
Complete log : http://autobuild.buildroot.net/results/fcdcc5479cda2c010ef32a76df2f98455594da5c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fcdcc5479cda2c010ef32a76df2f98455594da5c/config
Defconfig : http://autobuild.buildroot.net/results/fcdcc5479cda2c010ef32a76df2f98455594da5c/defconfig
Build 5a9040f9293fccc2db2bf36c6a02fd15588fb487
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 06:23:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/5a9040f9293fccc2db2bf36c6a02fd15588fb487/build-end.log
Complete log : http://autobuild.buildroot.net/results/5a9040f9293fccc2db2bf36c6a02fd15588fb487/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5a9040f9293fccc2db2bf36c6a02fd15588fb487/config
Defconfig : http://autobuild.buildroot.net/results/5a9040f9293fccc2db2bf36c6a02fd15588fb487/defconfig
Build 6b813d16a5741c975fa52f5f2ee20f552ddeeb9c
==============================================
Status : NOK
Failure reason : pixman-0.25.2
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 06:27:36
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/6b813d16a5741c975fa52f5f2ee20f552ddeeb9c/build-end.log
Complete log : http://autobuild.buildroot.net/results/6b813d16a5741c975fa52f5f2ee20f552ddeeb9c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6b813d16a5741c975fa52f5f2ee20f552ddeeb9c/config
Defconfig : http://autobuild.buildroot.net/results/6b813d16a5741c975fa52f5f2ee20f552ddeeb9c/defconfig
Build f1221245131ff9517c3ef1e70f75fe3330d5f11b
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 06:30:07
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/f1221245131ff9517c3ef1e70f75fe3330d5f11b/build-end.log
Complete log : http://autobuild.buildroot.net/results/f1221245131ff9517c3ef1e70f75fe3330d5f11b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f1221245131ff9517c3ef1e70f75fe3330d5f11b/config
Defconfig : http://autobuild.buildroot.net/results/f1221245131ff9517c3ef1e70f75fe3330d5f11b/defconfig
Build fc26c11c34d7e19a04e05940cf71871d3dfcc8d0
==============================================
Status : NOK
Failure reason : host-libglib2-2.30.3
Architecture : i686
Submitted by : Peter Korsgaard (gcc110)
Submitted at : 2012-12-10 06:37:09
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/fc26c11c34d7e19a04e05940cf71871d3dfcc8d0/build-end.log
Complete log : http://autobuild.buildroot.net/results/fc26c11c34d7e19a04e05940cf71871d3dfcc8d0/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fc26c11c34d7e19a04e05940cf71871d3dfcc8d0/config
Defconfig : http://autobuild.buildroot.net/results/fc26c11c34d7e19a04e05940cf71871d3dfcc8d0/defconfig
Build 8daa7d312fa23fd6de17826ee46cfe38d31869ea
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 06:48:14
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/8daa7d312fa23fd6de17826ee46cfe38d31869ea/build-end.log
Complete log : http://autobuild.buildroot.net/results/8daa7d312fa23fd6de17826ee46cfe38d31869ea/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8daa7d312fa23fd6de17826ee46cfe38d31869ea/config
Defconfig : http://autobuild.buildroot.net/results/8daa7d312fa23fd6de17826ee46cfe38d31869ea/defconfig
Build 70557bad9d0bb2be62f6a6b0b41eb4e9352b2ffe
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 06:52:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/70557bad9d0bb2be62f6a6b0b41eb4e9352b2ffe/build-end.log
Complete log : http://autobuild.buildroot.net/results/70557bad9d0bb2be62f6a6b0b41eb4e9352b2ffe/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/70557bad9d0bb2be62f6a6b0b41eb4e9352b2ffe/config
Defconfig : http://autobuild.buildroot.net/results/70557bad9d0bb2be62f6a6b0b41eb4e9352b2ffe/defconfig
Build b99c757884d14bbe8893900824763f63dd13f5dc
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 06:55:54
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/b99c757884d14bbe8893900824763f63dd13f5dc/build-end.log
Complete log : http://autobuild.buildroot.net/results/b99c757884d14bbe8893900824763f63dd13f5dc/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/b99c757884d14bbe8893900824763f63dd13f5dc/config
Defconfig : http://autobuild.buildroot.net/results/b99c757884d14bbe8893900824763f63dd13f5dc/defconfig
Build 00c058a4f72acaab1400901df257662e8357e7aa
==============================================
Status : NOK
Failure reason : dbus-1.4.24
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 07:05:33
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/00c058a4f72acaab1400901df257662e8357e7aa/build-end.log
Complete log : http://autobuild.buildroot.net/results/00c058a4f72acaab1400901df257662e8357e7aa/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/00c058a4f72acaab1400901df257662e8357e7aa/config
Defconfig : http://autobuild.buildroot.net/results/00c058a4f72acaab1400901df257662e8357e7aa/defconfig
Build 3bb9b7a8e3eb9e0021e5ca9f169515870c9eae4e
==============================================
Status : NOK
Failure reason : icu-4.8.1.1
Architecture : xtensa
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 07:16:50
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/3bb9b7a8e3eb9e0021e5ca9f169515870c9eae4e/build-end.log
Complete log : http://autobuild.buildroot.net/results/3bb9b7a8e3eb9e0021e5ca9f169515870c9eae4e/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3bb9b7a8e3eb9e0021e5ca9f169515870c9eae4e/config
Defconfig : http://autobuild.buildroot.net/results/3bb9b7a8e3eb9e0021e5ca9f169515870c9eae4e/defconfig
Build 26a9e152f533e467f68b72a373d0fc84d561eb87
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 07:24:24
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/26a9e152f533e467f68b72a373d0fc84d561eb87/build-end.log
Complete log : http://autobuild.buildroot.net/results/26a9e152f533e467f68b72a373d0fc84d561eb87/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/26a9e152f533e467f68b72a373d0fc84d561eb87/config
Defconfig : http://autobuild.buildroot.net/results/26a9e152f533e467f68b72a373d0fc84d561eb87/defconfig
Build 9bbea0bf903acc7fded179f47871e9d057de0244
==============================================
Status : NOK
Failure reason : bash-4.2
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-10 07:42:54
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/9bbea0bf903acc7fded179f47871e9d057de0244/build-end.log
Complete log : http://autobuild.buildroot.net/results/9bbea0bf903acc7fded179f47871e9d057de0244/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/9bbea0bf903acc7fded179f47871e9d057de0244/config
Defconfig : http://autobuild.buildroot.net/results/9bbea0bf903acc7fded179f47871e9d057de0244/defconfig
Build ba761dd632fd9be25a3dbf06e2d1cb6b521ccafb
==============================================
Status : NOK
Failure reason : libnl-3.2.16
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 07:58:29
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/ba761dd632fd9be25a3dbf06e2d1cb6b521ccafb/build-end.log
Complete log : http://autobuild.buildroot.net/results/ba761dd632fd9be25a3dbf06e2d1cb6b521ccafb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/ba761dd632fd9be25a3dbf06e2d1cb6b521ccafb/config
Defconfig : http://autobuild.buildroot.net/results/ba761dd632fd9be25a3dbf06e2d1cb6b521ccafb/defconfig
Build 715ee9af529632c4792941b57e974d940d685566
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 08:03:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/715ee9af529632c4792941b57e974d940d685566/build-end.log
Complete log : http://autobuild.buildroot.net/results/715ee9af529632c4792941b57e974d940d685566/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/715ee9af529632c4792941b57e974d940d685566/config
Defconfig : http://autobuild.buildroot.net/results/715ee9af529632c4792941b57e974d940d685566/defconfig
Build 97e80616ffea597e32e299b7357afc1dc572e057
==============================================
Status : NOK
Failure reason : ltrace-0.7.2
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 08:23:43
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/97e80616ffea597e32e299b7357afc1dc572e057/build-end.log
Complete log : http://autobuild.buildroot.net/results/97e80616ffea597e32e299b7357afc1dc572e057/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/97e80616ffea597e32e299b7357afc1dc572e057/config
Defconfig : http://autobuild.buildroot.net/results/97e80616ffea597e32e299b7357afc1dc572e057/defconfig
Build a0507cbd1d553138f8a7dff067f1ee8a7cbb4fc2
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 09:01:48
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/a0507cbd1d553138f8a7dff067f1ee8a7cbb4fc2/build-end.log
Complete log : http://autobuild.buildroot.net/results/a0507cbd1d553138f8a7dff067f1ee8a7cbb4fc2/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a0507cbd1d553138f8a7dff067f1ee8a7cbb4fc2/config
Defconfig : http://autobuild.buildroot.net/results/a0507cbd1d553138f8a7dff067f1ee8a7cbb4fc2/defconfig
Build 3c3ab6be1b0128857c85ff42a89f5440764d39c6
==============================================
Status : NOK
Failure reason : dbus-1.4.24
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 09:09:52
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/3c3ab6be1b0128857c85ff42a89f5440764d39c6/build-end.log
Complete log : http://autobuild.buildroot.net/results/3c3ab6be1b0128857c85ff42a89f5440764d39c6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3c3ab6be1b0128857c85ff42a89f5440764d39c6/config
Defconfig : http://autobuild.buildroot.net/results/3c3ab6be1b0128857c85ff42a89f5440764d39c6/defconfig
Build 4741f57ad7567b62854cba06d79d412061450cf6
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 09:10:17
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/4741f57ad7567b62854cba06d79d412061450cf6/build-end.log
Complete log : http://autobuild.buildroot.net/results/4741f57ad7567b62854cba06d79d412061450cf6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/4741f57ad7567b62854cba06d79d412061450cf6/config
Defconfig : http://autobuild.buildroot.net/results/4741f57ad7567b62854cba06d79d412061450cf6/defconfig
Build 3d04803a8daf4669ff130ee15f4e96f70c1d3243
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 09:50:35
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/3d04803a8daf4669ff130ee15f4e96f70c1d3243/build-end.log
Complete log : http://autobuild.buildroot.net/results/3d04803a8daf4669ff130ee15f4e96f70c1d3243/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3d04803a8daf4669ff130ee15f4e96f70c1d3243/config
Defconfig : http://autobuild.buildroot.net/results/3d04803a8daf4669ff130ee15f4e96f70c1d3243/defconfig
Build 661f887c3073375ece73d1b21d9428020310a85c
==============================================
Status : NOK
Failure reason : gpsd-3.7
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 09:59:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/661f887c3073375ece73d1b21d9428020310a85c/build-end.log
Complete log : http://autobuild.buildroot.net/results/661f887c3073375ece73d1b21d9428020310a85c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/661f887c3073375ece73d1b21d9428020310a85c/config
Defconfig : http://autobuild.buildroot.net/results/661f887c3073375ece73d1b21d9428020310a85c/defconfig
Build 712e0a8f763a377c9be5cc21cfc520929422e703
==============================================
Status : NOK
Failure reason : alsa-lib-1.0.26
Architecture : sh2a
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 09:59:39
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7345c095d3319568173362c16ba7f6f401976aab
End of log : http://autobuild.buildroot.net/results/712e0a8f763a377c9be5cc21cfc520929422e703/build-end.log
Complete log : http://autobuild.buildroot.net/results/712e0a8f763a377c9be5cc21cfc520929422e703/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/712e0a8f763a377c9be5cc21cfc520929422e703/config
Defconfig : http://autobuild.buildroot.net/results/712e0a8f763a377c9be5cc21cfc520929422e703/defconfig
Build 4252c2f0f85c27af0d814d8c9a4a5b4d74f4dac1
==============================================
Status : NOK
Failure reason : ortp-0.20.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 10:00:11
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7345c095d3319568173362c16ba7f6f401976aab
End of log : http://autobuild.buildroot.net/results/4252c2f0f85c27af0d814d8c9a4a5b4d74f4dac1/build-end.log
Complete log : http://autobuild.buildroot.net/results/4252c2f0f85c27af0d814d8c9a4a5b4d74f4dac1/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/4252c2f0f85c27af0d814d8c9a4a5b4d74f4dac1/config
Defconfig : http://autobuild.buildroot.net/results/4252c2f0f85c27af0d814d8c9a4a5b4d74f4dac1/defconfig
Build 113527766104b055f484d48d95445f19e45a0d7c
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : aarch64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 10:03:11
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7345c095d3319568173362c16ba7f6f401976aab
End of log : http://autobuild.buildroot.net/results/113527766104b055f484d48d95445f19e45a0d7c/build-end.log
Complete log : http://autobuild.buildroot.net/results/113527766104b055f484d48d95445f19e45a0d7c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/113527766104b055f484d48d95445f19e45a0d7c/config
Defconfig : http://autobuild.buildroot.net/results/113527766104b055f484d48d95445f19e45a0d7c/defconfig
Build 369114c5c03a442a4dfad4a6333bf2f2d319262d
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 10:04:39
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7345c095d3319568173362c16ba7f6f401976aab
End of log : http://autobuild.buildroot.net/results/369114c5c03a442a4dfad4a6333bf2f2d319262d/build-end.log
Complete log : http://autobuild.buildroot.net/results/369114c5c03a442a4dfad4a6333bf2f2d319262d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/369114c5c03a442a4dfad4a6333bf2f2d319262d/config
Defconfig : http://autobuild.buildroot.net/results/369114c5c03a442a4dfad4a6333bf2f2d319262d/defconfig
Build e29196893b808002719d5e0358a74547d8b2a3f3
==============================================
Status : NOK
Failure reason : squid-3.2.4
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 10:24:56
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7345c095d3319568173362c16ba7f6f401976aab
End of log : http://autobuild.buildroot.net/results/e29196893b808002719d5e0358a74547d8b2a3f3/build-end.log
Complete log : http://autobuild.buildroot.net/results/e29196893b808002719d5e0358a74547d8b2a3f3/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/e29196893b808002719d5e0358a74547d8b2a3f3/config
Defconfig : http://autobuild.buildroot.net/results/e29196893b808002719d5e0358a74547d8b2a3f3/defconfig
Build 2f01694b023d61b6fcddb10849e1d1390db51283
==============================================
Status : NOK
Failure reason : libnss-3.12.9
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 10:28:51
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=695f52c17488e90cac1d4dc5a2a48ae94f2c5bb9
End of log : http://autobuild.buildroot.net/results/2f01694b023d61b6fcddb10849e1d1390db51283/build-end.log
Complete log : http://autobuild.buildroot.net/results/2f01694b023d61b6fcddb10849e1d1390db51283/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2f01694b023d61b6fcddb10849e1d1390db51283/config
Defconfig : http://autobuild.buildroot.net/results/2f01694b023d61b6fcddb10849e1d1390db51283/defconfig
Build 0e4139d4f21b91f92077a717061636f743acb29f
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-10 11:05:55
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=10d042ad34b0741447e6da28631715ea362df631
End of log : http://autobuild.buildroot.net/results/0e4139d4f21b91f92077a717061636f743acb29f/build-end.log
Complete log : http://autobuild.buildroot.net/results/0e4139d4f21b91f92077a717061636f743acb29f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/0e4139d4f21b91f92077a717061636f743acb29f/config
Defconfig : http://autobuild.buildroot.net/results/0e4139d4f21b91f92077a717061636f743acb29f/defconfig
Build 279b82e00e6136cb94ac5bdaecab11e7954e5ae2
==============================================
Status : NOK
Failure reason : webkit-1.2.7
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 11:24:11
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/279b82e00e6136cb94ac5bdaecab11e7954e5ae2/build-end.log
Complete log : http://autobuild.buildroot.net/results/279b82e00e6136cb94ac5bdaecab11e7954e5ae2/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/279b82e00e6136cb94ac5bdaecab11e7954e5ae2/config
Defconfig : http://autobuild.buildroot.net/results/279b82e00e6136cb94ac5bdaecab11e7954e5ae2/defconfig
Build 8d5bf9989087a221024ac3ee128a469ec34babe8
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 11:25:02
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/8d5bf9989087a221024ac3ee128a469ec34babe8/build-end.log
Complete log : http://autobuild.buildroot.net/results/8d5bf9989087a221024ac3ee128a469ec34babe8/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8d5bf9989087a221024ac3ee128a469ec34babe8/config
Defconfig : http://autobuild.buildroot.net/results/8d5bf9989087a221024ac3ee128a469ec34babe8/defconfig
Build 8ab427f5ce9b174928a955129b587e26d21688e5
==============================================
Status : NOK
Failure reason : boost-1.49.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 11:40:36
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/8ab427f5ce9b174928a955129b587e26d21688e5/build-end.log
Complete log : http://autobuild.buildroot.net/results/8ab427f5ce9b174928a955129b587e26d21688e5/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8ab427f5ce9b174928a955129b587e26d21688e5/config
Defconfig : http://autobuild.buildroot.net/results/8ab427f5ce9b174928a955129b587e26d21688e5/defconfig
Build 931a370c7e37a223f5f82bd8ace6fbc9d17907e6
==============================================
Status : NOK
Failure reason : libnl-3.2.16
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 11:52:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/931a370c7e37a223f5f82bd8ace6fbc9d17907e6/build-end.log
Complete log : http://autobuild.buildroot.net/results/931a370c7e37a223f5f82bd8ace6fbc9d17907e6/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/931a370c7e37a223f5f82bd8ace6fbc9d17907e6/config
Defconfig : http://autobuild.buildroot.net/results/931a370c7e37a223f5f82bd8ace6fbc9d17907e6/defconfig
Build aabe844a388bf222a047738b925712425d814ef2
==============================================
Status : NOK
Failure reason : ltrace-0.7.2
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 12:02:19
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/aabe844a388bf222a047738b925712425d814ef2/build-end.log
Complete log : http://autobuild.buildroot.net/results/aabe844a388bf222a047738b925712425d814ef2/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/aabe844a388bf222a047738b925712425d814ef2/config
Defconfig : http://autobuild.buildroot.net/results/aabe844a388bf222a047738b925712425d814ef2/defconfig
Build 2729e1a273becb862ef5649653f064970d8c38cc
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : mipsel
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 12:17:23
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/2729e1a273becb862ef5649653f064970d8c38cc/build-end.log
Complete log : http://autobuild.buildroot.net/results/2729e1a273becb862ef5649653f064970d8c38cc/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2729e1a273becb862ef5649653f064970d8c38cc/config
Defconfig : http://autobuild.buildroot.net/results/2729e1a273becb862ef5649653f064970d8c38cc/defconfig
Build bb5efdbd63e5e16b3ace219a91fd0549573bbf37
==============================================
Status : NOK
Failure reason : host-python-2.7.3
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 12:22:23
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=16dcf2d668953a33c148baebd43afdb1df34cae5
End of log : http://autobuild.buildroot.net/results/bb5efdbd63e5e16b3ace219a91fd0549573bbf37/build-end.log
Complete log : http://autobuild.buildroot.net/results/bb5efdbd63e5e16b3ace219a91fd0549573bbf37/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/bb5efdbd63e5e16b3ace219a91fd0549573bbf37/config
Defconfig : http://autobuild.buildroot.net/results/bb5efdbd63e5e16b3ace219a91fd0549573bbf37/defconfig
Build 7ba481d155f8ac4711948a1aba2f47a69b9443e8
==============================================
Status : NOK
Failure reason : ltp-testsuite-20101031
Architecture : aarch64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 12:37:50
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/7ba481d155f8ac4711948a1aba2f47a69b9443e8/build-end.log
Complete log : http://autobuild.buildroot.net/results/7ba481d155f8ac4711948a1aba2f47a69b9443e8/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/7ba481d155f8ac4711948a1aba2f47a69b9443e8/config
Defconfig : http://autobuild.buildroot.net/results/7ba481d155f8ac4711948a1aba2f47a69b9443e8/defconfig
Build 307ddb8ef277d38d7c1ad10cb6af1d03a33e0223
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output2/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 12:51:17
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/307ddb8ef277d38d7c1ad10cb6af1d03a33e0223/build-end.log
Complete log : http://autobuild.buildroot.net/results/307ddb8ef277d38d7c1ad10cb6af1d03a33e0223/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/307ddb8ef277d38d7c1ad10cb6af1d03a33e0223/config
Defconfig : http://autobuild.buildroot.net/results/307ddb8ef277d38d7c1ad10cb6af1d03a33e0223/defconfig
Build 5849a959bdca33f4210b870587ae8eaf40ffee37
==============================================
Status : NOK
Failure reason : netatalk-3.0
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 13:16:36
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/5849a959bdca33f4210b870587ae8eaf40ffee37/build-end.log
Complete log : http://autobuild.buildroot.net/results/5849a959bdca33f4210b870587ae8eaf40ffee37/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5849a959bdca33f4210b870587ae8eaf40ffee37/config
Defconfig : http://autobuild.buildroot.net/results/5849a959bdca33f4210b870587ae8eaf40ffee37/defconfig
Build 962f5567f970e007d28751bf72a8467407c83003
==============================================
Status : NOK
Failure reason : boost-1.49.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 13:19:57
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/962f5567f970e007d28751bf72a8467407c83003/build-end.log
Complete log : http://autobuild.buildroot.net/results/962f5567f970e007d28751bf72a8467407c83003/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/962f5567f970e007d28751bf72a8467407c83003/config
Defconfig : http://autobuild.buildroot.net/results/962f5567f970e007d28751bf72a8467407c83003/defconfig
Build 521eded004b8573b8bb0145f0d1afcb3f3bc37ff
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 13:55:02
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/521eded004b8573b8bb0145f0d1afcb3f3bc37ff/build-end.log
Complete log : http://autobuild.buildroot.net/results/521eded004b8573b8bb0145f0d1afcb3f3bc37ff/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/521eded004b8573b8bb0145f0d1afcb3f3bc37ff/config
Defconfig : http://autobuild.buildroot.net/results/521eded004b8573b8bb0145f0d1afcb3f3bc37ff/defconfig
Build 324b08a772d18b4bc0d9d47b51eea2302a67572b
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 14:55:13
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/324b08a772d18b4bc0d9d47b51eea2302a67572b/build-end.log
Complete log : http://autobuild.buildroot.net/results/324b08a772d18b4bc0d9d47b51eea2302a67572b/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/324b08a772d18b4bc0d9d47b51eea2302a67572b/config
Defconfig : http://autobuild.buildroot.net/results/324b08a772d18b4bc0d9d47b51eea2302a67572b/defconfig
Build 93ee81050eeb98aeff6ba30714076d01f2476589
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 15:14:27
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/93ee81050eeb98aeff6ba30714076d01f2476589/build-end.log
Complete log : http://autobuild.buildroot.net/results/93ee81050eeb98aeff6ba30714076d01f2476589/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/93ee81050eeb98aeff6ba30714076d01f2476589/config
Defconfig : http://autobuild.buildroot.net/results/93ee81050eeb98aeff6ba30714076d01f2476589/defconfig
Build 2ca1d135269a67201e6b4d995ce8fbe94db1ed3f
==============================================
Status : NOK
Failure reason : libnss-3.12.9
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 15:24:59
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=24d9771337d88dae6298db12dd3fb284282c684b
End of log : http://autobuild.buildroot.net/results/2ca1d135269a67201e6b4d995ce8fbe94db1ed3f/build-end.log
Complete log : http://autobuild.buildroot.net/results/2ca1d135269a67201e6b4d995ce8fbe94db1ed3f/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2ca1d135269a67201e6b4d995ce8fbe94db1ed3f/config
Defconfig : http://autobuild.buildroot.net/results/2ca1d135269a67201e6b4d995ce8fbe94db1ed3f/defconfig
Build faa5cb9e1b07298557653dcf91c1f9d09f7cda2c
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : xtensa
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 15:34:54
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/faa5cb9e1b07298557653dcf91c1f9d09f7cda2c/build-end.log
Complete log : http://autobuild.buildroot.net/results/faa5cb9e1b07298557653dcf91c1f9d09f7cda2c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/faa5cb9e1b07298557653dcf91c1f9d09f7cda2c/config
Defconfig : http://autobuild.buildroot.net/results/faa5cb9e1b07298557653dcf91c1f9d09f7cda2c/defconfig
Build fce559029468d335cdb3ea5e51d6e0323aa07fff
==============================================
Status : NOK
Failure reason : dbus-1.4.24
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 15:35:40
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/fce559029468d335cdb3ea5e51d6e0323aa07fff/build-end.log
Complete log : http://autobuild.buildroot.net/results/fce559029468d335cdb3ea5e51d6e0323aa07fff/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/fce559029468d335cdb3ea5e51d6e0323aa07fff/config
Defconfig : http://autobuild.buildroot.net/results/fce559029468d335cdb3ea5e51d6e0323aa07fff/defconfig
Build f0e843c0ab138b0a254d5da1467cb690e73b6817
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output2/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 15:39:18
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/f0e843c0ab138b0a254d5da1467cb690e73b6817/build-end.log
Complete log : http://autobuild.buildroot.net/results/f0e843c0ab138b0a254d5da1467cb690e73b6817/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f0e843c0ab138b0a254d5da1467cb690e73b6817/config
Defconfig : http://autobuild.buildroot.net/results/f0e843c0ab138b0a254d5da1467cb690e73b6817/defconfig
Build 8f474ad1f93a0130ebb220d436d1ba2f9e1580a8
==============================================
Status : NOK
Failure reason : e2fsprogs-1.42.6
Architecture : avr32
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 16:26:41
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/8f474ad1f93a0130ebb220d436d1ba2f9e1580a8/build-end.log
Complete log : http://autobuild.buildroot.net/results/8f474ad1f93a0130ebb220d436d1ba2f9e1580a8/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8f474ad1f93a0130ebb220d436d1ba2f9e1580a8/config
Defconfig : http://autobuild.buildroot.net/results/8f474ad1f93a0130ebb220d436d1ba2f9e1580a8/defconfig
Build faeb743e3174771023f4672daf955f97fb1bd8fb
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output2/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 16:50:28
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/faeb743e3174771023f4672daf955f97fb1bd8fb/build-end.log
Complete log : http://autobuild.buildroot.net/results/faeb743e3174771023f4672daf955f97fb1bd8fb/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/faeb743e3174771023f4672daf955f97fb1bd8fb/config
Defconfig : http://autobuild.buildroot.net/results/faeb743e3174771023f4672daf955f97fb1bd8fb/defconfig
Build d4389b50dd4bac9d6b911343aee317eac2241050
==============================================
Status : NOK
Failure reason : sdl-1.2.15
Architecture : arm
Submitted by : Peter Korsgaard (gcc10)
Submitted at : 2012-12-10 17:11:27
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/d4389b50dd4bac9d6b911343aee317eac2241050/build-end.log
Complete log : http://autobuild.buildroot.net/results/d4389b50dd4bac9d6b911343aee317eac2241050/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/d4389b50dd4bac9d6b911343aee317eac2241050/config
Defconfig : http://autobuild.buildroot.net/results/d4389b50dd4bac9d6b911343aee317eac2241050/defconfig
Build 2ed697655591563df167ff0a2bfa659fd75b8125
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 17:11:37
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/2ed697655591563df167ff0a2bfa659fd75b8125/build-end.log
Complete log : http://autobuild.buildroot.net/results/2ed697655591563df167ff0a2bfa659fd75b8125/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/2ed697655591563df167ff0a2bfa659fd75b8125/config
Defconfig : http://autobuild.buildroot.net/results/2ed697655591563df167ff0a2bfa659fd75b8125/defconfig
Build 48b6641a2dc233da2607a604c0c0814a07aa0e6c
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : mipsel
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 17:15:38
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/48b6641a2dc233da2607a604c0c0814a07aa0e6c/build-end.log
Complete log : http://autobuild.buildroot.net/results/48b6641a2dc233da2607a604c0c0814a07aa0e6c/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/48b6641a2dc233da2607a604c0c0814a07aa0e6c/config
Defconfig : http://autobuild.buildroot.net/results/48b6641a2dc233da2607a604c0c0814a07aa0e6c/defconfig
Build a431bc0283e854e5ba9869b73351c37d7baf264d
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : mipsel
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 18:47:04
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/a431bc0283e854e5ba9869b73351c37d7baf264d/build-end.log
Complete log : http://autobuild.buildroot.net/results/a431bc0283e854e5ba9869b73351c37d7baf264d/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a431bc0283e854e5ba9869b73351c37d7baf264d/config
Defconfig : http://autobuild.buildroot.net/results/a431bc0283e854e5ba9869b73351c37d7baf264d/defconfig
Build 62d2e3f790c97331bf10f98b76c844ba757a899e
==============================================
Status : NOK
Failure reason : gpsd-3.7
Architecture : x86_64
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 19:26:00
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/62d2e3f790c97331bf10f98b76c844ba757a899e/build-end.log
Complete log : http://autobuild.buildroot.net/results/62d2e3f790c97331bf10f98b76c844ba757a899e/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/62d2e3f790c97331bf10f98b76c844ba757a899e/config
Defconfig : http://autobuild.buildroot.net/results/62d2e3f790c97331bf10f98b76c844ba757a899e/defconfig
Build a677643d431b569e316d7ea3a22ddf3b97116350
==============================================
Status : NOK
Failure reason : luajit-2.0.0
Architecture : powerpc
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 19:38:44
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/a677643d431b569e316d7ea3a22ddf3b97116350/build-end.log
Complete log : http://autobuild.buildroot.net/results/a677643d431b569e316d7ea3a22ddf3b97116350/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a677643d431b569e316d7ea3a22ddf3b97116350/config
Defconfig : http://autobuild.buildroot.net/results/a677643d431b569e316d7ea3a22ddf3b97116350/defconfig
Build 3010fc1d203f4336dda9b1cf34b6e43ffc993d59
==============================================
Status : NOK
Failure reason : libnl-3.2.16
Architecture : mips
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 21:22:08
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/3010fc1d203f4336dda9b1cf34b6e43ffc993d59/build-end.log
Complete log : http://autobuild.buildroot.net/results/3010fc1d203f4336dda9b1cf34b6e43ffc993d59/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/3010fc1d203f4336dda9b1cf34b6e43ffc993d59/config
Defconfig : http://autobuild.buildroot.net/results/3010fc1d203f4336dda9b1cf34b6e43ffc993d59/defconfig
Build 6800615b660568291c6c9d64f92c997bc423e8e9
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 21:26:12
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/6800615b660568291c6c9d64f92c997bc423e8e9/build-end.log
Complete log : http://autobuild.buildroot.net/results/6800615b660568291c6c9d64f92c997bc423e8e9/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/6800615b660568291c6c9d64f92c997bc423e8e9/config
Defconfig : http://autobuild.buildroot.net/results/6800615b660568291c6c9d64f92c997bc423e8e9/defconfig
Build dab1547fc4f343ba143cb2ecfbdb7633cc7eb7c7
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : mipsel
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 21:30:13
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/dab1547fc4f343ba143cb2ecfbdb7633cc7eb7c7/build-end.log
Complete log : http://autobuild.buildroot.net/results/dab1547fc4f343ba143cb2ecfbdb7633cc7eb7c7/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/dab1547fc4f343ba143cb2ecfbdb7633cc7eb7c7/config
Defconfig : http://autobuild.buildroot.net/results/dab1547fc4f343ba143cb2ecfbdb7633cc7eb7c7/defconfig
Build 13ada326e544f8e12c4d78ca97b5db06c08a0946
==============================================
Status : NOK
Failure reason : dnsmasq-2.64
Architecture : powerpc
Submitted by : Peter Korsgaard (gcc14)
Submitted at : 2012-12-10 21:54:10
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/13ada326e544f8e12c4d78ca97b5db06c08a0946/build-end.log
Complete log : http://autobuild.buildroot.net/results/13ada326e544f8e12c4d78ca97b5db06c08a0946/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/13ada326e544f8e12c4d78ca97b5db06c08a0946/config
Defconfig : http://autobuild.buildroot.net/results/13ada326e544f8e12c4d78ca97b5db06c08a0946/defconfig
Build 5c064e367b43fdeee0b56acc89d100b561c086e5
==============================================
Status : NOK
Failure reason : valgrind-3.7.0
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 22:43:03
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=422700feba3c56a5bb9534d222395c00c930df65
End of log : http://autobuild.buildroot.net/results/5c064e367b43fdeee0b56acc89d100b561c086e5/build-end.log
Complete log : http://autobuild.buildroot.net/results/5c064e367b43fdeee0b56acc89d100b561c086e5/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/5c064e367b43fdeee0b56acc89d100b561c086e5/config
Defconfig : http://autobuild.buildroot.net/results/5c064e367b43fdeee0b56acc89d100b561c086e5/defconfig
Build f744f8d1fb3f4a1419a59849ab0ea6c632e3e899
==============================================
Status : NOK
Failure reason : libtirpc-0.2.2
Architecture : bfin
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 22:55:01
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7ffda3e241c4d57394d9f5eeb19e41a3546c0495
End of log : http://autobuild.buildroot.net/results/f744f8d1fb3f4a1419a59849ab0ea6c632e3e899/build-end.log
Complete log : http://autobuild.buildroot.net/results/f744f8d1fb3f4a1419a59849ab0ea6c632e3e899/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/f744f8d1fb3f4a1419a59849ab0ea6c632e3e899/config
Defconfig : http://autobuild.buildroot.net/results/f744f8d1fb3f4a1419a59849ab0ea6c632e3e899/defconfig
Build a63b064e370545b855b521e417057ed98333cf8a
==============================================
Status : NOK
Failure reason : make: *** [/home/test/test/output1/stamps/ct-ng-toolchain-built] Error 2
Architecture : arm
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 22:58:42
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7ffda3e241c4d57394d9f5eeb19e41a3546c0495
End of log : http://autobuild.buildroot.net/results/a63b064e370545b855b521e417057ed98333cf8a/build-end.log
Complete log : http://autobuild.buildroot.net/results/a63b064e370545b855b521e417057ed98333cf8a/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/a63b064e370545b855b521e417057ed98333cf8a/config
Defconfig : http://autobuild.buildroot.net/results/a63b064e370545b855b521e417057ed98333cf8a/defconfig
Build 8d7f898dba84b61c0749e76afd3a1186fe0a5587
==============================================
Status : NOK
Failure reason : libffi-3.0.11
Architecture : microblaze
Submitted by : Thomas Petazzoni (Free Electrons build server)
Submitted at : 2012-12-10 23:20:27
Git commit ID : http://git.buildroot.net/buildroot/commit/?id=7ffda3e241c4d57394d9f5eeb19e41a3546c0495
End of log : http://autobuild.buildroot.net/results/8d7f898dba84b61c0749e76afd3a1186fe0a5587/build-end.log
Complete log : http://autobuild.buildroot.net/results/8d7f898dba84b61c0749e76afd3a1186fe0a5587/build.log.bz2
Configuration : http://autobuild.buildroot.net/results/8d7f898dba84b61c0749e76afd3a1186fe0a5587/config
Defconfig : http://autobuild.buildroot.net/results/8d7f898dba84b61c0749e76afd3a1186fe0a5587/defconfig
--
http://autobuild.buildroot.net
^ permalink raw reply
* [Buildroot] buildroot 2012.11 large file support
From: Peter Korsgaard @ 2012-12-11 7:04 UTC (permalink / raw)
To: buildroot
In-Reply-To: <CAKvQZ_3P_nfpGsC+V6Z_eRjsmNssV-Pq0EDp0v78hfkY4vwdqg@mail.gmail.com>
>>>>> "Willy" == Willy Lambert <lambert.willy@gmail.com> writes:
Willy> Yes, so I just quit it so it leaves the default config (which
Willy> seems to have a problem with large file)
>>
>> Ok, that also works here:
>>
>> yes '' | make oldconfig
>> make
Does that work for you?
>> Notice that we have a bunch of preconfigured qemu defconfigs (look in
>> configs/)
>>
Willy> thanks for this tips I overlooked that. I'm on a x86 atom so
Willy> there is little config to preset.
Is your build machine an atom? If so, beware that your build times are
going to be quite long. Don't you have access to any faster machines?
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] Linux build error: mixed implicit and normal rules
From: Woody Wu @ 2012-12-11 6:20 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121211042828.GC3880@tarshish>
On 2012-12-11, Baruch Siach
<baruch@tkos.co.il> wrote:
> Hi Woody,
>
> On Tue, Dec 11, 2012 at 01:13:50AM +0000, Woody Wu wrote:
>> On 2012-12-10, Baruch Siach
>> <baruch@tkos.co.il> wrote:
>> > On Mon, Dec 10, 2012 at 09:14:12AM +0000, Woody Wu wrote:
>> >> I am trying to build an old Linux kernel 2.6.16. But got the error:
>> >>
>> >> Makefile:441: mixed implicit and normal rules. stop.
>> >>
>> >> The line 441 of Linux makefile is:
>> >>
>> >> config %config: scripts_basic outputmakefile FORCE
>> >> $(Q)mkdir -p include/linux
>> >> $(Q)$(MAKE) $(build)=scripts/kconfig $@
>> >> $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
>> >>
>> >> How should I fix this? My buildroot version is 2012.08.
>> >
>> > Not related to Buildroot, but anyway...
>> >
>> > If you used GNU make version 3.82 you need something like (kernel) commit
>> > 3c955b407a084810f57260d61548cc92c14bc627 (fixes for using make 3.82).
>>
>> Sorry, what this magic number is?
>
> It's a git commit ID. See the commit itself at
> http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;
a=commitdiff;h=3c955b407a084810f57260d61548cc92c14bc627.
> For more information on git see http://git-scm.com.
>
Many thanks and sorry for asking such a stupid question (I only used svn
in my project)
--
woody
I can't go back to yesterday - because I was a different person then.
^ permalink raw reply
* [Buildroot] Linux build error: mixed implicit and normal rules
From: Baruch Siach @ 2012-12-11 4:28 UTC (permalink / raw)
To: buildroot
In-Reply-To: <slrnkcd24f.28d.narkewoody@zuhnb712.local.com>
Hi Woody,
On Tue, Dec 11, 2012 at 01:13:50AM +0000, Woody Wu wrote:
> On 2012-12-10, Baruch Siach
> <baruch@tkos.co.il> wrote:
> > On Mon, Dec 10, 2012 at 09:14:12AM +0000, Woody Wu wrote:
> >> I am trying to build an old Linux kernel 2.6.16. But got the error:
> >>
> >> Makefile:441: mixed implicit and normal rules. stop.
> >>
> >> The line 441 of Linux makefile is:
> >>
> >> config %config: scripts_basic outputmakefile FORCE
> >> $(Q)mkdir -p include/linux
> >> $(Q)$(MAKE) $(build)=scripts/kconfig $@
> >> $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
> >>
> >> How should I fix this? My buildroot version is 2012.08.
> >
> > Not related to Buildroot, but anyway...
> >
> > If you used GNU make version 3.82 you need something like (kernel) commit
> > 3c955b407a084810f57260d61548cc92c14bc627 (fixes for using make 3.82).
>
> Sorry, what this magic number is?
It's a git commit ID. See the commit itself at
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=3c955b407a084810f57260d61548cc92c14bc627.
For more information on git see http://git-scm.com.
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
^ permalink raw reply
* [Buildroot] buildroot 2012.11 large file support
From: Willy Lambert @ 2012-12-11 2:13 UTC (permalink / raw)
To: buildroot
In-Reply-To: <87pq2hpnpq.fsf@dell.be.48ers.dk>
2012/12/10 Peter Korsgaard <jacmet@uclibc.org>:
>>>>>> "Willy" == Willy Lambert <lambert.willy@gmail.com> writes:
>
> Hi,
>
> Willy> Yes, so I just quit it so it leaves the default config (which
> Willy> seems to have a problem with large file)
>
> Ok, that also works here:
>
> yes '' | make oldconfig
> make
>
> Willy> I'm not blocked I already have my root image (with large file
> Willy> enabled), I'm currently setting up qemu to test it, our remark is
> just
> Willy> that default config seems dummy.
>
> Notice that we have a bunch of preconfigured qemu defconfigs (look in
> configs/)
>
thanks for this tips I overlooked that. I'm on a x86 atom so there is
little config to preset.
> --
> Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] Linux build error: mixed implicit and normal rules
From: Woody Wu @ 2012-12-11 1:13 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121210092000.GC5482@sapphire.tkos.co.il>
On 2012-12-10, Baruch Siach
<baruch@tkos.co.il> wrote:
> Hi Woody,
>
> On Mon, Dec 10, 2012 at 09:14:12AM +0000, Woody Wu wrote:
>> I am trying to build an old Linux kernel 2.6.16. But got the error:
>>
>> Makefile:441: mixed implicit and normal rules. stop.
>>
>> The line 441 of Linux makefile is:
>>
>> config %config: scripts_basic outputmakefile FORCE
>> $(Q)mkdir -p include/linux
>> $(Q)$(MAKE) $(build)=scripts/kconfig $@
>> $(Q)$(MAKE) -C $(srctree) KBUILD_SRC= .kernelrelease
>>
>> How should I fix this? My buildroot version is 2012.08.
>
> Not related to Buildroot, but anyway...
>
> If you used GNU make version 3.82 you need something like (kernel) commit
> 3c955b407a084810f57260d61548cc92c14bc627 (fixes for using make 3.82).
>
Sorry, what this magic number is?
--
woody
I can't go back to yesterday - because I was a different person then.
^ permalink raw reply
* [Buildroot] [PATCH 52/52] package/qemu: add support for FDT
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
FDT is the Flat Device Tree, and allows QEMU to pass DTs to the VMs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 7 +++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index f88a1f4..b258df6 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -264,6 +264,13 @@ comment "Alsa sound static link works only if BR2_PREFER_STATIC is set"
>>>>>>> dd73234... package/qemu: enable a static build
comment "Misc. features"
+config BR2_PACKAGE_QEMU_FDT
+ bool "Enable FDT"
+ select BR2_PACKAGE_DTC
+ help
+ Say 'y' here to have QEMU capable of constructing Device Trees,
+ and passing them to the VMs.
+
config BR2_PACKAGE_QEMU_UUID
bool "Enable VMs UUID"
depends on BR2_PACKAGE_UTIL_LINUX
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index f113892..5496ee5 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -228,6 +228,13 @@ ifeq ($(BR2_PACKAGE_QEMU_MIXEMU),y)
QEMU_OPTS += --enable-mixemu
endif
+ifeq ($(BR2_PACKAGE_QEMU_FDT),y)
+QEMU_OPTS += --enable-fdt
+QEMU_DEPENDENCIES += dtc
+else
+QEMU_OPTS += --disable-fdt
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
QEMU_OPTS += --enable-uuid
QEMU_DEPENDENCIES += util-linux
@@ -349,7 +356,6 @@ define QEMU_CONFIGURE_CMDS
--disable-slirp \
--disable-vnc-sasl \
--disable-brlapi \
- --disable-fdt \
--disable-guest-base \
--disable-rbd \
--disable-smartcard \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 51/52] package/dtc: add option to install programs
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
By default, we only install the libfdt library.
As suggested by Arnout, add an option that also
installs the few dtc programs.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
dtdiff, a diff for device trees, requires bash.
I did not add a 'depends on bash' (or a 'select' either), because
requiring bash just for that is a bit far-fetched.
Instead, at dtc install time, if bash is selected, dtdiff is installed
as usual to the target rootfs; if bash is not selected, dtdiff is
removed from the target rootfs.
---
package/dtc/Config.in | 24 ++++++++++++++++++++++--
package/dtc/dtc.mk | 29 +++++++++++++++++++++++------
2 files changed, 45 insertions(+), 8 deletions(-)
diff --git a/package/dtc/Config.in b/package/dtc/Config.in
index 96225e3..1c65a10 100644
--- a/package/dtc/Config.in
+++ b/package/dtc/Config.in
@@ -1,9 +1,29 @@
config BR2_PACKAGE_DTC
- bool "dtc"
+ bool "dtc (libfdt)"
help
The Device Tree Compiler, dtc, takes as input a device-tree in
a given format and outputs a device-tree in another format.
- Note that only the library is installed for now.
+ Note that only the library is installed.
+ If you want the programs, say 'y' here, and to "dtc programs", below.
http://git.jdl.com/gitweb/?p=dtc.git (no home page)
+
+if BR2_PACKAGE_DTC
+
+config BR2_PACKAGE_DTC_PROGRAMS
+ bool "dtc programs"
+ help
+ Say 'y' here if you also want the programs on the target:
+ - convert-dtsv0 convert from version 0 to version 1
+ - dtc the device tree compiler
+ - dtdiff compare two device trees (needs bash)
+ - fdtdump print a readable version of a flat device tree
+ - fdtget read values from device tree
+ - fdtput write a property value to a device tree
+
+ Note: dtdiff requires bash, so if bash is not selected, dtdiff will
+ be removed from the target file system. Enable bash if you
+ need dtdiff on the target.
+
+endif
diff --git a/package/dtc/dtc.mk b/package/dtc/dtc.mk
index a0e1e35..42843d5 100644
--- a/package/dtc/dtc.mk
+++ b/package/dtc/dtc.mk
@@ -8,27 +8,44 @@ DTC_VERSION = e4b497f367a3b2ae99cc52089a14a221b13a76ef
DTC_SITE = git://git.jdl.com/software/dtc.git
DTC_LICENSE = GPLv2+/BSD-2c
DTC_LICENSE_FILES = README.license GPL
-# Note: the dual-license only applies to the library.
-# The DT compiler (dtc) is GPLv2+, but we do not install it.
DTC_INSTALL_STAGING = YES
+ifeq ($(BR2_PACKAGE_DTC_PROGRAMS),y)
+DTC_LICENSE += (for the library), GPLv2+ (for the executables)
+# Use default goal to build everything
+DTC_BUILD_GOAL =
+DTC_INSTALL_GOAL = install
+DTC_CLEAN_GOAL = clean
+else # $(BR2_PACKAGE_DTC_PROGRAMS) != y
+DTC_BUILD_GOAL = libfdt
+#?libfdt_install is our own install rule added by our patch
+DTC_INSTALL_GOAL = libfdt_install
+DTC_CLEAN_GOAL = libfdt_clean
+ifeq ($(BR2_PACKAGE_BASH),)
+DTC_POST_INSTALL_TARGET_HOOKS += DTC_POST_INSTALL_TARGET_RM_DTDIFF
+endif
+endif # $(BR2_PACKAGE_DTC_PROGRAMS) != y
+
define DTC_BUILD_CMDS
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
- $(MAKE) -C $(@D) PREFIX=/usr libfdt
+ $(MAKE) -C $(@D) PREFIX=/usr $(DTC_BUILD_GOAL)
endef
-#?libfdt_install is our own install rule added by our patch
+# For staging, only the library is needed
define DTC_INSTALL_STAGING_CMDS
$(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) PREFIX=/usr libfdt_install
endef
define DTC_INSTALL_TARGET_CMDS
- $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr libfdt_install
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr $(DTC_INSTALL_GOAL)
+endef
+define DTC_POST_INSTALL_TARGET_RM_DTDIFF
+ rm -f $(TARGET_DIR)/usr/bin/dtdiff
endef
define DTC_CLEAN_CMDS
- $(MAKE) -C $(@D) libfdt_clean
+ $(MAKE) -C $(@D) $(DTC_CLEAN_GOAL)
endef
$(eval $(generic-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 50/52] package/dtc: new package
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
dtc is the Device Tree Compiler, and manipulates device trees.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
Although Arnout suggested to move it out of the libraries sub-menu,
I kept it there, as by default, only the library is installed, like
it is done for, eg., libcurl.
---
package/Config.in | 1 +
package/dtc/Config.in | 9 +++++++
| 27 ++++++++++++++++++++++
package/dtc/dtc-separate-lib-install.patch | 28 +++++++++++++++++++++++
package/dtc/dtc.mk | 34 ++++++++++++++++++++++++++++
5 files changed, 99 insertions(+), 0 deletions(-)
create mode 100644 package/dtc/Config.in
create mode 100644 package/dtc/dtc-extra_cflags.patch
create mode 100644 package/dtc/dtc-separate-lib-install.patch
create mode 100644 package/dtc/dtc.mk
diff --git a/package/Config.in b/package/Config.in
index a93aed2..ef7f44d 100644
--- a/package/Config.in
+++ b/package/Config.in
@@ -417,6 +417,7 @@ endmenu
menu "Hardware handling"
source "package/ccid/Config.in"
+source "package/dtc/Config.in"
source "package/lcdapi/Config.in"
source "package/libaio/Config.in"
source "package/libraw1394/Config.in"
diff --git a/package/dtc/Config.in b/package/dtc/Config.in
new file mode 100644
index 0000000..96225e3
--- /dev/null
+++ b/package/dtc/Config.in
@@ -0,0 +1,9 @@
+config BR2_PACKAGE_DTC
+ bool "dtc"
+ help
+ The Device Tree Compiler, dtc, takes as input a device-tree in
+ a given format and outputs a device-tree in another format.
+
+ Note that only the library is installed for now.
+
+ http://git.jdl.com/gitweb/?p=dtc.git (no home page)
--git a/package/dtc/dtc-extra_cflags.patch b/package/dtc/dtc-extra_cflags.patch
new file mode 100644
index 0000000..9d1882b
--- /dev/null
+++ b/package/dtc/dtc-extra_cflags.patch
@@ -0,0 +1,27 @@
+Makefile: append the CFLAGS to existing ones
+
+Allow the user to pass custom CFLAGS (eg. optimisation flags).
+
+Do not use EXTRA_CFLAGS, append to existing CFLAGS with += (Arnout)
+
+Cc: Arnout Vandecappelle <arnout@mind.be>
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch not sent upstream.
+
+Although not specific to buildroot, I am not sure this is the best
+way to handle user-supplied CFLAGS.
+
+diff -durN dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef.orig/Makefile dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef/Makefile
+--- dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef.orig/Makefile 2012-10-22 22:02:47.541240846 +0200
++++ dtc-e4b497f367a3b2ae99cc52089a14a221b13a76ef/Makefile 2012-10-22 22:03:21.151047833 +0200
+@@ -18,7 +18,7 @@
+ CPPFLAGS = -I libfdt -I .
+ WARNINGS = -Werror -Wall -Wpointer-arith -Wcast-qual -Wnested-externs \
+ -Wstrict-prototypes -Wmissing-prototypes -Wredundant-decls
+-CFLAGS = -g -Os -fPIC -Werror $(WARNINGS)
++CFLAGS += -g -Os -fPIC -Werror $(WARNINGS)
+
+ BISON = bison
+ LEX = flex
diff --git a/package/dtc/dtc-separate-lib-install.patch b/package/dtc/dtc-separate-lib-install.patch
new file mode 100644
index 0000000..c86d587
--- /dev/null
+++ b/package/dtc/dtc-separate-lib-install.patch
@@ -0,0 +1,28 @@
+Makefile: add a rule to only install libfdt
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch not sent upstream.
+
+It's really specific to buildroot, and is probably not
+good (aka generic) enough to be pushed upstream.
+
+diff --git a/Makefile b/Makefile
+index 1169e6c..39e7190 100644
+--- a/Makefile
++++ b/Makefile
+@@ -160,10 +160,12 @@ endif
+ # intermediate target and building them again "for real"
+ .SECONDARY: $(DTC_GEN_SRCS) $(CONVERT_GEN_SRCS)
+
+-install: all $(SCRIPTS)
++install: all $(SCRIPTS) libfdt_install
+ @$(VECHO) INSTALL
+ $(INSTALL) -d $(DESTDIR)$(BINDIR)
+ $(INSTALL) $(BIN) $(SCRIPTS) $(DESTDIR)$(BINDIR)
++
++libfdt_install: libfdt
+ $(INSTALL) -d $(DESTDIR)$(LIBDIR)
+ $(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)
+ ln -sf $(notdir $(LIBFDT_lib)) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)
diff --git a/package/dtc/dtc.mk b/package/dtc/dtc.mk
new file mode 100644
index 0000000..a0e1e35
--- /dev/null
+++ b/package/dtc/dtc.mk
@@ -0,0 +1,34 @@
+#############################################################
+#
+# dtc
+#
+#############################################################
+
+DTC_VERSION = e4b497f367a3b2ae99cc52089a14a221b13a76ef
+DTC_SITE = git://git.jdl.com/software/dtc.git
+DTC_LICENSE = GPLv2+/BSD-2c
+DTC_LICENSE_FILES = README.license GPL
+# Note: the dual-license only applies to the library.
+# The DT compiler (dtc) is GPLv2+, but we do not install it.
+DTC_INSTALL_STAGING = YES
+
+define DTC_BUILD_CMDS
+ $(TARGET_CONFIGURE_OPTS) \
+ CFLAGS="$(TARGET_CFLAGS)" \
+ $(MAKE) -C $(@D) PREFIX=/usr libfdt
+endef
+
+#?libfdt_install is our own install rule added by our patch
+define DTC_INSTALL_STAGING_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(STAGING_DIR) PREFIX=/usr libfdt_install
+endef
+
+define DTC_INSTALL_TARGET_CMDS
+ $(MAKE) -C $(@D) DESTDIR=$(TARGET_DIR) PREFIX=/usr libfdt_install
+endef
+
+define DTC_CLEAN_CMDS
+ $(MAKE) -C $(@D) libfdt_clean
+endef
+
+$(eval $(generic-package))
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 49/52] package/qemu: enable a static build
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
It can be useful to have a statically-linked QEMU (especially the
linux-user and bsd-user emulators) to avoid run-time issues with
dynamically-loaded libraries.
There is an issue where QEMU could not be able to properly (re)map
libraries in memory due to some overlap between its own memory
mappings and the mappings of the user application being translated
(it's a complex issue, so don't count on me to properly explain it,
I did not understood it completely either... :-/ ).
---
package/qemu/Config.in | 48 +++++++++++++++++++----
package/qemu/qemu-static-curl.patch | 72 +++++++++++++++++++++++++++++++++++
package/qemu/qemu-static-sdl.patch | 54 ++++++++++++++++++++++++++
package/qemu/qemu.mk | 4 ++
4 files changed, 170 insertions(+), 8 deletions(-)
create mode 100644 package/qemu/qemu-static-curl.patch
create mode 100644 package/qemu/qemu-static-sdl.patch
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 435775a..f88a1f4 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -99,11 +99,11 @@ config BR2_PACKAGE_QEMU_VNC_JPEG
config BR2_PACKAGE_QEMU_VNC_TLS
bool "TLS encryption"
depends on BR2_PACKAGE_QEMU_VNC
- depends on !BR2_PREFER_STATIC_LIB
+ depends on !BR2_PACKAGE_QEMU_STATIC
select BR2_PACKAGE_GNUTLS
comment "VNC TLS encryption does not work for static link"
- depends on BR2_PACKAGE_QEMU_VNC && BR2_PREFER_STATIC_LIB
+ depends on BR2_PACKAGE_QEMU_VNC && BR2_PACKAGE_QEMU_STATIC
config BR2_PACKAGE_QEMU_SDL
bool "Enable SDL frontend"
@@ -126,11 +126,21 @@ config BR2_PACKAGE_QEMU_CURSES
config BR2_PACKAGE_QEMU_SPICE
bool "Enable Spice frontend"
depends on BR2_PACKAGE_SPICE
+ depends on !BR2_PACKAGE_QEMU_STATIC || BR2_PREFER_STATIC_LIB
help
Say 'y' here to have QEMU support Spice as a (VNC-like) frontend.
-comment "Spice support requires spice-server"
- depends on !BR2_PACKAGE_SPICE
+ Note:
+ Spice links against alsa-libs, but alsa-libs can't be built both
+ shared and static at the same time, so we can not link with a
+ static spice to get a static QEMU (BR2_PACKAGE_QEMU_STATIC) if
+ buildroot as a whole does not also build only static libraries
+ (BR2_PREFER_STATIC_LIB).
+
+if !BR2_PACKAGE_SPICE || ( BR2_PACKAGE_QEMU_STATIC && !BR2_PREFER_STATIC_LIB )
+comment "Spice support requires spice-server, and does not work for a static"
+comment "build of QEMU unless BR2_PREFER_STATIC_LIB is set, too"
+endif
comment "Block backends"
@@ -150,14 +160,10 @@ config BR2_PACKAGE_QEMU_VIRTFS
config BR2_PACKAGE_QEMU_CURL
bool "Enable remote block-devices using cURL"
- depends on !BR2_PREFER_STATIC_LIB
select BR2_PACKAGE_LIBCURL
help
Say 'y' to access remote block-devices using libcurl.
-comment "cURL support is not possible with static linking"
- depends on BR2_PREFER_STATIC_LIB
-
config BR2_PACKAGE_QEMU_ISCSI
bool "Enable remote block-devices using iSCSI"
select BR2_PACKAGE_LIBISCSI
@@ -238,6 +244,24 @@ config BR2_PACKAGE_QEMU_SOUND_SDL
Note: this is only for system emulation, not user emulation.
+<<<<<<< HEAD
+=======
+# Alsa can not build both shared and static libs@the same time.
+# But we may want to build QEMU staticaly, even though the global
+# BR2_PREFER_STATIC_LIB is not set. Disable that case.
+config BR2_PACKAGE_QEMU_SOUND_ALSA
+ bool "Enable sound via alsa"
+ depends on !BR2_PACKAGE_QEMU_STATIC || BR2_PREFER_STATIC_LIB
+ select BR2_PACKAGE_ALSA_LIB
+ help
+ Say 'y' here to have QEMU play sound from the VMs via alsa.
+
+ Note: this is only for system emulation, not user emulation.
+
+comment "Alsa sound static link works only if BR2_PREFER_STATIC is set"
+ depends on BR2_PACKAGE_QEMU_STATIC && !BR2_PREFER_STATIC_LIB
+
+>>>>>>> dd73234... package/qemu: enable a static build
comment "Misc. features"
config BR2_PACKAGE_QEMU_UUID
@@ -296,4 +320,12 @@ config BR2_PACKAGE_QEMU_KEYMAPS
- 'de fr* en-*' for german, french and english keymaps
- and so on (see the QEMU source for all supported keymaps)
+config BR2_PREFER_STATIC_LIB
+ select BR2_PACKAGE_QEMU_STATIC
+
+config BR2_PACKAGE_QEMU_STATIC
+ bool "Build statically"
+ help
+ Build static qemu executable(s).
+
endif # BR2_PACKAGE_QEMU
diff --git a/package/qemu/qemu-static-curl.patch b/package/qemu/qemu-static-curl.patch
new file mode 100644
index 0000000..0029d7d
--- /dev/null
+++ b/package/qemu/qemu-static-curl.patch
@@ -0,0 +1,72 @@
+configure: fix detection for cURL libs when static linking
+
+Currently, to check for cURL, configure uses either pkg-config (the default),
+or curl-config (as a fallback).
+
+But curl-config and pkg-config do not have the same set of options:
+ - to check for shared libs, both use the option: --libs
+ - to check for static libs:
+ - pkg-config uses: --static --libs
+ - curl-config uses: --static-libs
+
+To add to the complexity, pkg-config is called through the querry_pkg_config
+wrapper, that already passes --static when static linking is required, but
+there is no such wrapper for curl-config, so we miss the occasion to pass
+--static-libs
+
+To fix this:
+ - introduce a new variable QEMU_XXX_CONFIG_LIBS_FLAGS that mirrors the
+ behavior of QEMU_PKG_CONFIG_FLAGS; this variable can be used by all
+ xxx-config scripts (eg. curl-config, but later sdl-config too).
+ Default it to '--libs', which is for shared linking;
+ - properly use either --libs for pkg-config (--static is already takend
+ care of in the wrapper), or $QEMU_XXX_CONFIG_LIBS_FLAGS for
+ curl-config.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch sent upstream:
+ http://lists.nongnu.org/archive/html/qemu-trivial/2012-08/msg00165.html
+
+diff --git a/configure b/configure
+index d97fd81..e6a7c14 100755
+--- a/configure
++++ b/configure
+@@ -101,7 +101,7 @@ audio_win_int=""
+ cc_i386=i386-pc-linux-gnu-gcc
+ libs_qga=""
+ debug_info="yes"
+-
++QEMU_XXX_CONFIG_LIBS_FLAGS="--libs"
+ target_list=""
+
+ # Default value for a variable defining feature "foo".
+@@ -580,6 +580,7 @@ for opt do
+ static="yes"
+ LDFLAGS="-static $LDFLAGS"
+ QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
++ QEMU_XXX_CONFIG_LIBS_FLAGS="--static-libs"
+ ;;
+ --mandir=*) mandir="$optarg"
+ ;;
+@@ -1977,8 +1978,10 @@ fi
+
+ if $pkg_config libcurl --modversion >/dev/null 2>&1; then
+ curlconfig="$pkg_config libcurl"
++ curlconfiglibs="--libs"
+ else
+ curlconfig=curl-config
++ curlconfiglibs="$QEMU_XXX_CONFIG_LIBS_FLAGS"
+ fi
+
+ if test "$curl" != "no" ; then
+@@ -1987,7 +1990,7 @@ if test "$curl" != "no" ; then
+ int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
+ EOF
+ curl_cflags=`$curlconfig --cflags 2>/dev/null`
+- curl_libs=`$curlconfig --libs 2>/dev/null`
++ curl_libs=`$curlconfig $curlconfiglibs 2>/dev/null`
+ if compile_prog "$curl_cflags" "$curl_libs" ; then
+ curl=yes
+ libs_tools="$curl_libs $libs_tools"
diff --git a/package/qemu/qemu-static-sdl.patch b/package/qemu/qemu-static-sdl.patch
new file mode 100644
index 0000000..59e4a60
--- /dev/null
+++ b/package/qemu/qemu-static-sdl.patch
@@ -0,0 +1,54 @@
+configure: fix detection for SDL libs when static linking
+
+Currently, configure checks for SDL libs with either pkg-config (the
+default), or with sdl-config (as a fallback).
+
+As for cURL (previous patch), sdl-config does not have the same set of
+options as pkg-config:
+ - to check for shared libs, both use the option: --libs
+ - to check for static libs:
+ - pkg-config uses: --static --libs
+ - curl-config uses: --static-libs
+
+Fix that by using the previously introduced $QEMU_XXX_CONFIG_LIBS_FLAGS
+variable, the way ot was done previously for cURL.
+
+Also, simplify the code-path for checking for SDL libs with a single,
+non-conditional call to $sdlconfig, which is either pkg-config or
+sdl-config, as checked just above.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+---
+Patch sent upstream:
+ http://lists.nongnu.org/archive/html/qemu-trivial/2012-08/msg00166.html
+
+diff --git a/configure b/configure
+index e6a7c14..6bfedc7 100755
+--- a/configure
++++ b/configure
+@@ -1547,9 +1547,11 @@ fi
+
+ if $pkg_config sdl --modversion >/dev/null 2>&1; then
+ sdlconfig="$pkg_config sdl"
++ sdlconfiglibs="--libs"
+ _sdlversion=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'`
+ elif has ${sdl_config}; then
+ sdlconfig="$sdl_config"
++ sdlconfiglibs="$QEMU_XXX_CONFIG_LIBS_FLAGS"
+ _sdlversion=`$sdlconfig --version | sed 's/[^0-9]//g'`
+ else
+ if test "$sdl" = "yes" ; then
+@@ -1569,11 +1571,7 @@ if test "$sdl" != "no" ; then
+ int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
+ EOF
+ sdl_cflags=`$sdlconfig --cflags 2> /dev/null`
+- if test "$static" = "yes" ; then
+- sdl_libs=`$sdlconfig --static-libs 2>/dev/null`
+- else
+- sdl_libs=`$sdlconfig --libs 2> /dev/null`
+- fi
++ sdl_libs=`$sdlconfig $sdlconfiglibs 2> /dev/null`
+ if compile_prog "$sdl_cflags" "$sdl_libs" ; then
+ if test "$_sdlversion" -lt 121 ; then
+ sdl_too_old=yes
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 1ee1afa..f113892 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -268,6 +268,10 @@ else
QEMU_OPTS += --disable-docs
endif
+ifeq ($(BR2_PACKAGE_QEMU_STATIC),y)
+QEMU_OPTS += --static
+endif
+
# Post-install removal of unwanted keymaps:
# - if we want 'all', we do nothing;
# - if we want none, we completely remove the keymap dir
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 48/52] package/qemu: move sub-options into a sub-menu
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
As there are now quite a few options to QEMU, move them into their own
sub-menu, so it looks a bit less crowded in the 'misc' menu.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 4aa8647..435775a 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -2,7 +2,7 @@ comment "QEMU requires a toolchain with threads"
depends on !BR2_i386 && !BR2_x86_64
depends on !BR2_TOOLCHAIN_HAS_THREADS
-config BR2_PACKAGE_QEMU
+menuconfig BR2_PACKAGE_QEMU
bool "QEMU"
depends on BR2_i386 || BR2_x86_64
depends on BR2_TOOLCHAIN_HAS_THREADS
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 47/52] package/qemu: option to build the docs
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/qemu.mk | 7 ++++++-
1 files changed, 6 insertions(+), 1 deletions(-)
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index a980c76..1ee1afa 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -262,6 +262,12 @@ ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
QEMU_OPTS += --disable-blobs
endif
+ifeq ($(BR2_HAVE_DOCUMENTATION),y)
+QEMU_OPTS += --enable-docs
+else
+QEMU_OPTS += --disable-docs
+endif
+
# Post-install removal of unwanted keymaps:
# - if we want 'all', we do nothing;
# - if we want none, we completely remove the keymap dir
@@ -341,7 +347,6 @@ define QEMU_CONFIGURE_CMDS
--disable-brlapi \
--disable-fdt \
--disable-guest-base \
- --disable-docs \
--disable-rbd \
--disable-smartcard \
--disable-strip \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 46/52] package/qemu: add support for libseccomp
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 7 +++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index dad72a8..4aa8647 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -263,6 +263,13 @@ config BR2_PACKAGE_QEMU_ATTR
Say 'y' here to have QEMU support attributes (attr) and eXtended
attibutes (xattr).
+config BR2_PACKAGE_QEMU_SECCOMP
+ bool "Enable seccomp filter"
+ select BR2_PACKAGE_LIBSECCOMP
+ help
+ Say 'y' here to have QEMU to use the Linux kernel's seccomp filter,
+ to more tightly confine the VMs.
+
config BR2_PACKAGE_QEMU_BLOBS
bool "Install binary blobs"
default y
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index dfe9cbb..a980c76 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -251,6 +251,13 @@ else
QEMU_OPTS += --disable-attr
endif
+ifeq ($(BR2_PACKAGE_QEMU_SECCOMP),y)
+QEMU_OPTS += --enable-seccomp
+QEMU_DEPENDENCIES += libseccomp
+else
+QEMU_OPTS += --disable-seccomp
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
QEMU_OPTS += --disable-blobs
endif
@@ -338,7 +345,6 @@ define QEMU_CONFIGURE_CMDS
--disable-rbd \
--disable-smartcard \
--disable-strip \
- --disable-seccomp \
--disable-sparse \
$(QEMU_OPTS) \
)
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 45/52] package/qemu: enable sound
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 38 ++++++++++++++++++++++++++++++++++++++
package/qemu/qemu.mk | 19 +++++++++++++++++--
2 files changed, 55 insertions(+), 2 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index deabb6f..dad72a8 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -200,6 +200,44 @@ config BR2_PACKAGE_QEMU_VDE
Say 'y' here to have QEMU connect to VDE (Virtual Distributed
Ethernet) switches.
+comment "Sound"
+
+config BR2_PACKAGE_QEMU_SOUND_CARDS
+ string "Enable sound cards"
+ default "ac97 es1370 hda"
+ help
+ Enter here the list of sound cards you want QEMU to emulate.
+ The available sound cards are:
+ ac97 es1370 sb16 cs4231a adlib gus hda
+
+ The default is: ac97 es1370 hda
+
+ Note: even if you say 'n' to both alsa and SDL drivers, below, QEMU
+ always include the 'wav' driver, which stores the generated sound
+ into a file, and the 'none' driver, which discards generated sound.
+
+config BR2_PACKAGE_QEMU_MIXEMU
+ bool "Enable mixer emulation"
+ help
+ Say 'y' here to have QEMU emulate a mixer device.
+
+config BR2_PACKAGE_QEMU_SOUND_ALSA
+ bool "Enable sound via alsa"
+ select BR2_PACKAGE_ALSA_LIB
+ help
+ Say 'y' here to have QEMU play sound from the VMs via alsa.
+
+ Note: this is only for system emulation, not user emulation.
+
+config BR2_PACKAGE_QEMU_SOUND_SDL
+ bool "Enable sound via SDL"
+ select BR2_PACKAGE_QEMU_SDL # Requires that SDL frontend be selected
+ select BR2_PACKAGE_SDL
+ help
+ Say 'y' here to have QEMU play sound from the VMs via SDL.
+
+ Note: this is only for system emulation, not user emulation.
+
comment "Misc. features"
config BR2_PACKAGE_QEMU_UUID
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 34a3a04..dfe9cbb 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -211,6 +211,23 @@ else
QEMU_OPTS += --disable-vde
endif
+QEMU_SND_DRV =
+ifeq ($(BR2_PACKAGE_QEMU_SOUND_ALSA),y)
+QEMU_SND_DRV += alsa
+QEMU_DEPENDENCIES += alsa-lib
+endif
+ifeq ($(BR2_PACKAGE_QEMU_SOUND_SDL),y)
+QEMU_SND_DRV += sdl
+QEMU_DEPENDENCIES += sdl
+endif
+ifneq ($(QEMU_SND_DRV),)
+QEMU_OPTS += --audio-drv-list="$(QEMU_SND_DRV)"
+endif
+QEMU_OPTS += --audio-card-list=$(BR2_PACKAGE_QEMU_SOUND_CARDS)
+ifeq ($(BR2_PACKAGE_QEMU_MIXEMU),y)
+QEMU_OPTS += --enable-mixemu
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
QEMU_OPTS += --enable-uuid
QEMU_DEPENDENCIES += util-linux
@@ -307,8 +324,6 @@ define QEMU_CONFIGURE_CMDS
./configure \
--prefix=/usr \
--cross-prefix=$(TARGET_CROSS) \
- --audio-drv-list= \
- --audio-card-list= \
--enable-kvm \
--enable-nptl \
--enable-vhost-net \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 44/52] package/qemu: add support for Spice
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 9 +++++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 322066b..deabb6f 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -123,6 +123,15 @@ config BR2_PACKAGE_QEMU_CURSES
frontend (although you can still use the SDL or VNC frontends to
display the graphical output).
+config BR2_PACKAGE_QEMU_SPICE
+ bool "Enable Spice frontend"
+ depends on BR2_PACKAGE_SPICE
+ help
+ Say 'y' here to have QEMU support Spice as a (VNC-like) frontend.
+
+comment "Spice support requires spice-server"
+ depends on !BR2_PACKAGE_SPICE
+
comment "Block backends"
config BR2_PACKAGE_QEMU_VIRTFS
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 8da3069..34a3a04 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -156,6 +156,13 @@ else
QEMU_OPTS += --disable-curses
endif
+ifeq ($(BR2_PACKAGE_QEMU_SPICE),y)
+QEMU_OPTS += --enable-spice
+QEMU_DEPENDENCIES += spice
+else
+QEMU_OPTS += --disable-spice
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_VIRTFS),y)
QEMU_OPTS += --enable-virtfs
else
@@ -313,7 +320,6 @@ define QEMU_CONFIGURE_CMDS
--disable-fdt \
--disable-guest-base \
--disable-docs \
- --disable-spice \
--disable-rbd \
--disable-smartcard \
--disable-strip \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 43/52] package/qemu: add support for USB redirection
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 9 +++++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index a10abb1..322066b 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -155,6 +155,15 @@ config BR2_PACKAGE_QEMU_ISCSI
help
Say 'y' here to have QEMU use iSCSI targets as block-devices.
+config BR2_PACKAGE_QEMU_USBREDIR
+ bool "Enable USB redirection"
+ depends on BR2_PACKAGE_USBREDIR
+ help
+ Say 'y' here to have QEMU support USB redirection over the network.
+
+comment "USB redirection requires usbredir"
+ depends on !BR2_PACKAGE_USBREDIR
+
config BR2_PACKAGE_QEMU_AIO
bool "Enable AIO"
depends on BR2_PACKAGE_LIBAIO
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 4c67215..8da3069 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -176,6 +176,13 @@ else
QEMU_OPTS += --disable-libiscsi
endif
+ifeq ($(BR2_PACKAGE_QEMU_USBREDIR),y)
+QEMU_OPTS += --enable-usb-redir
+QEMU_DEPENDENCIES += usbredir
+else
+QEMU_OPTS += --disable-usb-redir
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_AIO),y)
QEMU_OPTS += --enable-linux-aio
QEMU_DEPENDENCIES += libaio
@@ -308,7 +315,6 @@ define QEMU_CONFIGURE_CMDS
--disable-docs \
--disable-spice \
--disable-rbd \
- --disable-usb-redir \
--disable-smartcard \
--disable-strip \
--disable-seccomp \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 42/52] package/qemu: add iSCSI support
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 6 ++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 13 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 38bb290..a10abb1 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -149,6 +149,12 @@ config BR2_PACKAGE_QEMU_CURL
comment "cURL support is not possible with static linking"
depends on BR2_PREFER_STATIC_LIB
+config BR2_PACKAGE_QEMU_ISCSI
+ bool "Enable remote block-devices using iSCSI"
+ select BR2_PACKAGE_LIBISCSI
+ help
+ Say 'y' here to have QEMU use iSCSI targets as block-devices.
+
config BR2_PACKAGE_QEMU_AIO
bool "Enable AIO"
depends on BR2_PACKAGE_LIBAIO
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index eaea30c..4c67215 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -169,6 +169,13 @@ else
QEMU_OPTS += --disable-curl
endif
+ifeq ($(BR2_PACKAGE_QEMU_ISCSI),y)
+QEMU_OPTS += --enable-libiscsi
+QEMU_DEPENDENCIES += libiscsi
+else
+QEMU_OPTS += --disable-libiscsi
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_AIO),y)
QEMU_OPTS += --enable-linux-aio
QEMU_DEPENDENCIES += libaio
@@ -301,7 +308,6 @@ define QEMU_CONFIGURE_CMDS
--disable-docs \
--disable-spice \
--disable-rbd \
- --disable-libiscsi \
--disable-usb-redir \
--disable-smartcard \
--disable-strip \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 41/52] package/qemu: add support for VDE switches
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 7 +++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index c91ce33..38bb290 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -169,6 +169,13 @@ config BR2_PACKAGE_QEMU_BLUEZ
comment "BlueZ connectivity depends on bluez-utils"
depends on !BR2_PACKAGE_BLUEZ_UTILS
+config BR2_PACKAGE_QEMU_VDE
+ bool "Enable VDE"
+ select BR2_PACKAGE_VDE2
+ help
+ Say 'y' here to have QEMU connect to VDE (Virtual Distributed
+ Ethernet) switches.
+
comment "Misc. features"
config BR2_PACKAGE_QEMU_UUID
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 941babc..eaea30c 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -183,6 +183,13 @@ else
QEMU_OPTS += --disable-bluez
endif
+ifeq ($(BR2_PACKAGE_QEMU_VDE),y)
+QEMU_OPTS += --enable-vde
+QEMU_DEPENDENCIES += vde2
+else
+QEMU_OPTS += --disable-vde
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
QEMU_OPTS += --enable-uuid
QEMU_DEPENDENCIES += util-linux
@@ -291,7 +298,6 @@ define QEMU_CONFIGURE_CMDS
--disable-brlapi \
--disable-fdt \
--disable-guest-base \
- --disable-vde \
--disable-docs \
--disable-spice \
--disable-rbd \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 40/52] package/qemu: add AIO support
From: Yann E. MORIN @ 2012-12-10 23:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Add support for Asynchronous Input/Ouput (AIO).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 9 +++++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 16 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index d912036..c91ce33 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -149,6 +149,15 @@ config BR2_PACKAGE_QEMU_CURL
comment "cURL support is not possible with static linking"
depends on BR2_PREFER_STATIC_LIB
+config BR2_PACKAGE_QEMU_AIO
+ bool "Enable AIO"
+ depends on BR2_PACKAGE_LIBAIO
+ help
+ Say 'y' here to enable Asynchronous Input/Output (AIO).
+
+comment "AIO support depends on libaio"
+ depends on !BR2_PACKAGE_LIBAIO
+
comment "Networking"
config BR2_PACKAGE_QEMU_BLUEZ
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 1657b8f..941babc 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -169,6 +169,13 @@ else
QEMU_OPTS += --disable-curl
endif
+ifeq ($(BR2_PACKAGE_QEMU_AIO),y)
+QEMU_OPTS += --enable-linux-aio
+QEMU_DEPENDENCIES += libaio
+else
+QEMU_OPTS += --disable-linux-aio
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_BLUEZ),y)
QEMU_OPTS += --enable-bluez
QEMU_DEPENDENCIES += bluez_utils
@@ -285,7 +292,6 @@ define QEMU_CONFIGURE_CMDS
--disable-fdt \
--disable-guest-base \
--disable-vde \
- --disable-linux-aio \
--disable-docs \
--disable-spice \
--disable-rbd \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 39/52] package/qemu: add BlueZ connectivity
From: Yann E. MORIN @ 2012-12-10 23:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 11 +++++++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 18 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 15239a7..d912036 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -149,6 +149,17 @@ config BR2_PACKAGE_QEMU_CURL
comment "cURL support is not possible with static linking"
depends on BR2_PREFER_STATIC_LIB
+comment "Networking"
+
+config BR2_PACKAGE_QEMU_BLUEZ
+ bool "Enable BlueZ connectivity"
+ depends on BR2_PACKAGE_BLUEZ_UTILS
+ help
+ Say 'y' here to enable BlueZ (bluetooth) connectivity in QEMU.
+
+comment "BlueZ connectivity depends on bluez-utils"
+ depends on !BR2_PACKAGE_BLUEZ_UTILS
+
comment "Misc. features"
config BR2_PACKAGE_QEMU_UUID
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 90197f9..1657b8f 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -169,6 +169,13 @@ else
QEMU_OPTS += --disable-curl
endif
+ifeq ($(BR2_PACKAGE_QEMU_BLUEZ),y)
+QEMU_OPTS += --enable-bluez
+QEMU_DEPENDENCIES += bluez_utils
+else
+QEMU_OPTS += --disable-bluez
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
QEMU_OPTS += --enable-uuid
QEMU_DEPENDENCIES += util-linux
@@ -276,7 +283,6 @@ define QEMU_CONFIGURE_CMDS
--disable-vnc-sasl \
--disable-brlapi \
--disable-fdt \
- --disable-bluez \
--disable-guest-base \
--disable-vde \
--disable-linux-aio \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 38/52] package/qemu: enable use of the curses frontend
From: Yann E. MORIN @ 2012-12-10 23:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 11 +++++++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 18 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 47857ec..15239a7 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -112,6 +112,17 @@ config BR2_PACKAGE_QEMU_SDL
Say 'y' to enable the SDL frontend, that is, a graphical window
presenting the VM's display.
+config BR2_PACKAGE_QEMU_CURSES
+ bool "Enable the curses frontend"
+ select BR2_PACKAGE_NCURSES
+ help
+ Say 'y' to use curses to display the text-mode of VGA outpout.
+
+ If the VM's graphic adapter does not support VGA text-mode, or it
+ is in graphical mode, then nothing will be displayed with this
+ frontend (although you can still use the SDL or VNC frontends to
+ display the graphical output).
+
comment "Block backends"
config BR2_PACKAGE_QEMU_VIRTFS
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index e0270f0..90197f9 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -149,6 +149,13 @@ else
QEMU_OPTS += --disable-sdl
endif
+ifeq ($(BR2_PACKAGE_QEMU_CURSES),y)
+QEMU_OPTS += --enable-curses
+QEMU_DEPENDENCIES += ncurses
+else
+QEMU_OPTS += --disable-curses
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_VIRTFS),y)
QEMU_OPTS += --enable-virtfs
else
@@ -268,7 +275,6 @@ define QEMU_CONFIGURE_CMDS
--disable-slirp \
--disable-vnc-sasl \
--disable-brlapi \
- --disable-curses \
--disable-fdt \
--disable-bluez \
--disable-guest-base \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 37/52] package/qemu: add support for cURL
From: Yann E. MORIN @ 2012-12-10 23:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
QEMU can use libcurl as a block backend, to access remote block devices.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 10 ++++++++++
package/qemu/qemu.mk | 8 +++++++-
2 files changed, 17 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 237fb7b..47857ec 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -128,6 +128,16 @@ config BR2_PACKAGE_QEMU_VIRTFS
file-system called 9p, and can be accelerated by using the 9p
virtio).
+config BR2_PACKAGE_QEMU_CURL
+ bool "Enable remote block-devices using cURL"
+ depends on !BR2_PREFER_STATIC_LIB
+ select BR2_PACKAGE_LIBCURL
+ help
+ Say 'y' to access remote block-devices using libcurl.
+
+comment "cURL support is not possible with static linking"
+ depends on BR2_PREFER_STATIC_LIB
+
comment "Misc. features"
config BR2_PACKAGE_QEMU_UUID
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index b34ff69..e0270f0 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -155,6 +155,13 @@ else
QEMU_OPTS += --disable-virtfs
endif
+ifeq ($(BR2_PACKAGE_QEMU_CURL),y)
+QEMU_OPTS += --enable-curl
+QEMU_DEPENDENCIES += libcurl
+else
+QEMU_OPTS += --disable-curl
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
QEMU_OPTS += --enable-uuid
QEMU_DEPENDENCIES += util-linux
@@ -262,7 +269,6 @@ define QEMU_CONFIGURE_CMDS
--disable-vnc-sasl \
--disable-brlapi \
--disable-curses \
- --disable-curl \
--disable-fdt \
--disable-bluez \
--disable-guest-base \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 36/52] package/qemu: add support for virtfs
From: Yann E. MORIN @ 2012-12-10 23:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 16 ++++++++++++++++
package/qemu/qemu.mk | 7 ++++++-
2 files changed, 22 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 138949c..237fb7b 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -112,6 +112,22 @@ config BR2_PACKAGE_QEMU_SDL
Say 'y' to enable the SDL frontend, that is, a graphical window
presenting the VM's display.
+comment "Block backends"
+
+config BR2_PACKAGE_QEMU_VIRTFS
+ bool "Enable plan9 ressources using VirtFS"
+ select BR2_PACKAGE_QEMU_CAP
+ select BR2_PACKAGE_QEMU_ATTR
+ help
+ Say 'y' here if you want QEMU to provide a plan9 virtual "share"
+ accessible from the guest OS for relatively fast access to host
+ files.
+
+ This requires that the guest OS is capable of accessing plan9
+ ressources (typically, in Linux, this is done by a network
+ file-system called 9p, and can be accelerated by using the 9p
+ virtio).
+
comment "Misc. features"
config BR2_PACKAGE_QEMU_UUID
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index 7e4d08f..b34ff69 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -149,6 +149,12 @@ else
QEMU_OPTS += --disable-sdl
endif
+ifeq ($(BR2_PACKAGE_QEMU_VIRTFS),y)
+QEMU_OPTS += --enable-virtfs
+else
+QEMU_OPTS += --disable-virtfs
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
QEMU_OPTS += --enable-uuid
QEMU_DEPENDENCIES += util-linux
@@ -254,7 +260,6 @@ define QEMU_CONFIGURE_CMDS
--disable-xen \
--disable-slirp \
--disable-vnc-sasl \
- --disable-virtfs \
--disable-brlapi \
--disable-curses \
--disable-curl \
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 35/52] package/qemu: add attr/xattr option
From: Yann E. MORIN @ 2012-12-10 23:44 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1355183112-10735-1-git-send-email-yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
package/qemu/Config.in | 6 ++++++
package/qemu/qemu.mk | 7 ++++++-
2 files changed, 12 insertions(+), 1 deletions(-)
diff --git a/package/qemu/Config.in b/package/qemu/Config.in
index 1ef6c25..138949c 100644
--- a/package/qemu/Config.in
+++ b/package/qemu/Config.in
@@ -131,6 +131,12 @@ config BR2_PACKAGE_QEMU_CAP
help
Say 'y' here if you want QEMU to support capabilities.
+config BR2_PACKAGE_QEMU_ATTR
+ bool "Enable attr and xattr"
+ help
+ Say 'y' here to have QEMU support attributes (attr) and eXtended
+ attibutes (xattr).
+
config BR2_PACKAGE_QEMU_BLOBS
bool "Install binary blobs"
default y
diff --git a/package/qemu/qemu.mk b/package/qemu/qemu.mk
index a69ca9d..7e4d08f 100644
--- a/package/qemu/qemu.mk
+++ b/package/qemu/qemu.mk
@@ -166,6 +166,12 @@ QEMU_OPTS += --disable-cap-ng
QEMU_VARS += cap=no
endif
+ifeq ($(BR2_PACKAGE_QEMU_ATTR),y)
+QEMU_OPTS += --enable-attr
+else
+QEMU_OPTS += --disable-attr
+endif
+
ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
QEMU_OPTS += --disable-blobs
endif
@@ -243,7 +249,6 @@ define QEMU_CONFIGURE_CMDS
--audio-card-list= \
--enable-kvm \
--enable-nptl \
- --enable-attr \
--enable-vhost-net \
--disable-bsd-user \
--disable-xen \
--
1.7.2.5
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox