* [Buildroot] [PATCH 2/2] diffutils: fix build with recent glibc
From: Thomas Petazzoni @ 2012-12-28 20:41 UTC (permalink / raw)
To: buildroot
Fixes the following build problem with recent toolchains:
In file included from exclude.c:31:0:
./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
CC hard-locale.o
make[4]: *** [exclude.o] Error 1
make[4]: *** Waiting for unfinished jobs....
In file included from stdio-safer.h:20:0,
from freopen-safer.c:22:
./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
...tils-gets-no-longer-exists-in-eglibc-2.16.patch | 26 ++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch
diff --git a/package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch b/package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch
new file mode 100644
index 0000000..4785718
--- /dev/null
+++ b/package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch
@@ -0,0 +1,26 @@
+Handle the fact that gets() no longer exists in glibc >= 2.16
+
+The problem has been fixed upstream, but no release containing the fix
+has been made so far.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+Index: b/lib/stdio.in.h
+===================================================================
+--- a/lib/stdio.in.h
++++ b/lib/stdio.in.h
+@@ -693,12 +693,14 @@
+ _GL_CXXALIAS_SYS (gets, char *, (char *s));
+ # undef gets
+ # endif
++# if defined gets
+ _GL_CXXALIASWARN (gets);
+ /* It is very rare that the developer ever has full control of stdin,
+ so any use of gets warrants an unconditional warning. Assume it is
+ always declared, since it is required by C89. */
+ _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
+ #endif
++#endif
+
+
+ #if @GNULIB_OBSTACK_PRINTF@ || @GNULIB_OBSTACK_PRINTF_POSIX@
--
1.7.9.5
^ permalink raw reply related
* [Buildroot] Buildroot Developers Meeting after FOSDEM 2013
From: Yann E. MORIN @ 2012-12-28 20:45 UTC (permalink / raw)
To: buildroot
In-Reply-To: <20121228212925.3c5074c6@skate>
Thomas, All,
On Friday 28 December 2012 Thomas Petazzoni wrote:
> As was announced after the previous Developers Meeting, the next one
> will take place on February 4th and 5th 2013 in Brussels, right after
> the FOSDEM conference (http://www.fosdem.org).
Great!
> I really recommend people living in Europe to attend the FOSDEM
> conference, it's a great event with lots of interesting talks. And
> it'll allow you to attend the Buildroot meeting as well!
Seconded. FOSDEM is like an ants nest: very busy with very interesting
stuff all over the place. You won't be disapointed!
> Interested people are invited to contact me to get registered for the
> meeting. Registration is free.
For your pleasure, or your penitence (pick one! ;-), I'll be attending
this year!
So: is anyone willing to share a bedroom for the WE?
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] [PATCH 1/7] gnutls: bump to version 3.1.5
From: Peter Korsgaard @ 2012-12-28 20:52 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1356724043-8879-1-git-send-email-gustavo@zacarias.com.ar>
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
Gustavo> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Gustavo> ---
Gustavo> package/gnutls/Config.in | 9 +++-
Gustavo> ...001-gets-no-longer-exists-in-e-glibc-2.16.patch | 56 --------------------
Gustavo> package/gnutls/gnutls.mk | 26 +++++++---
Gustavo> 3 files changed, 27 insertions(+), 64 deletions(-)
Gustavo> delete mode 100644 package/gnutls/gnutls-0001-gets-no-longer-exists-in-e-glibc-2.16.patch
Gustavo> diff --git a/package/gnutls/Config.in b/package/gnutls/Config.in
Gustavo> index cedf120..2bd5ab6 100644
Gustavo> --- a/package/gnutls/Config.in
Gustavo> +++ b/package/gnutls/Config.in
Gustavo> @@ -1,8 +1,15 @@
Gustavo> config BR2_PACKAGE_GNUTLS
Gustavo> bool "gnutls"
Gustavo> - select BR2_PACKAGE_LIBGCRYPT
Gustavo> + select BR2_PACKAGE_NETTLE
Gustavo> help
Gustavo> GnuTLS is a secure communications library implementing the SSL
Gustavo> and TLS protocols and technologies around them.
Gustavo> http://www.gnu.org/software/gnutls/gnutls.html
Gustavo> +
Gustavo> +config BR2_PACKAGE_GNUTLS_TOOLS
Gustavo> + bool "install tools"
Gustavo> + depends on BR2_PACKAGE_GNUTLS
Gustavo> + depends on BR2_USE_WCHAR
Gustavo> + help
Gustavo> + Install GnuTLS command line tools for various cryptographic tasks.
I've added a comment line about tools not available with a !WCHAR
toolchain and committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] hostapd: remove gnutls support
From: Peter Korsgaard @ 2012-12-28 20:53 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=788fcd99e0578e361f192aae4b89b15f1a60faac
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
hostapd isn't API compatible with gnutls3 so remove support.
It's probably hardly used since openssl is far more common, and hostapd
can use its internal routines if it's not available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/hostapd/hostapd.mk | 9 +--------
1 files changed, 1 insertions(+), 8 deletions(-)
diff --git a/package/hostapd/hostapd.mk b/package/hostapd/hostapd.mk
index 45a93fc..b18881a 100644
--- a/package/hostapd/hostapd.mk
+++ b/package/hostapd/hostapd.mk
@@ -27,7 +27,7 @@ define HOSTAPD_LIBTOMMATH_CONFIG
$(SED) 's/\(#\)\(CONFIG_INTERNAL_LIBTOMMATH.*\)/\2/' $(HOSTAPD_CONFIG)
endef
-# Try to use openssl or gnutls if it's already available
+# Try to use openssl if it's already available
ifeq ($(BR2_PACKAGE_OPENSSL),y)
HOSTAPD_DEPENDENCIES += openssl
define HOSTAPD_TLS_CONFIG
@@ -35,17 +35,10 @@ define HOSTAPD_TLS_CONFIG
$(SED) 's/\(#\)\(CONFIG_EAP_PWD.*\)/\2/' $(HOSTAPD_CONFIG)
endef
else
-ifeq ($(BR2_PACKAGE_GNUTLS),y)
- HOSTAPD_DEPENDENCIES += gnutls
-define HOSTAPD_TLS_CONFIG
- $(SED) 's/\(#\)\(CONFIG_TLS=\).*/\2gnutls/' $(HOSTAPD_CONFIG)
-endef
-else
define HOSTAPD_TLS_CONFIG
$(SED) 's/\(#\)\(CONFIG_TLS=\).*/\2internal/' $(HOSTAPD_CONFIG)
endef
endif
-endif
ifeq ($(BR2_PACKAGE_HOSTAPD_EAP),y)
define HOSTAPD_EAP_CONFIG
^ permalink raw reply related
* [Buildroot] [PATCH 2/7] hostapd: remove gnutls support
From: Peter Korsgaard @ 2012-12-28 20:54 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1356724043-8879-2-git-send-email-gustavo@zacarias.com.ar>
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
Gustavo> hostapd isn't API compatible with gnutls3 so remove support.
Gustavo> It's probably hardly used since openssl is far more common,
Gustavo> and hostapd can use its internal routines if it's not
Gustavo> available.
I've resuffled this to come before the gnutls one and committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] gnutls: bump to version 3.1.5
From: Peter Korsgaard @ 2012-12-28 20:55 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=a8293a376574c439041de48e6571a4b82f7d2c3b
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
[Peter: add comment when tools not available]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/gnutls/Config.in | 12 ++++-
...001-gets-no-longer-exists-in-e-glibc-2.16.patch | 56 --------------------
package/gnutls/gnutls.mk | 26 +++++++---
3 files changed, 30 insertions(+), 64 deletions(-)
diff --git a/package/gnutls/Config.in b/package/gnutls/Config.in
index cedf120..2739088 100644
--- a/package/gnutls/Config.in
+++ b/package/gnutls/Config.in
@@ -1,8 +1,18 @@
config BR2_PACKAGE_GNUTLS
bool "gnutls"
- select BR2_PACKAGE_LIBGCRYPT
+ select BR2_PACKAGE_NETTLE
help
GnuTLS is a secure communications library implementing the SSL
and TLS protocols and technologies around them.
http://www.gnu.org/software/gnutls/gnutls.html
+
+config BR2_PACKAGE_GNUTLS_TOOLS
+ bool "install tools"
+ depends on BR2_PACKAGE_GNUTLS
+ depends on BR2_USE_WCHAR
+ help
+ Install GnuTLS command line tools for various cryptographic tasks.
+
+comment "gnutls tools requires a toolchain with WCHAR support"
+ depends on BR2_PACKAGE_GNUTLS && !BR2_USE_WCHAR
diff --git a/package/gnutls/gnutls-0001-gets-no-longer-exists-in-e-glibc-2.16.patch b/package/gnutls/gnutls-0001-gets-no-longer-exists-in-e-glibc-2.16.patch
deleted file mode 100644
index 802e7ac..0000000
--- a/package/gnutls/gnutls-0001-gets-no-longer-exists-in-e-glibc-2.16.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From 855f72c4fe7f4bbf2137ab60357ae3b27bb65185 Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Sat, 17 Nov 2012 17:45:41 +0100
-Subject: [PATCH] gets() no longer exists in (e)glibc >= 2.16
-
-gnutls has already updated gnulib upstream in more recent versions
-(3.x) but apparently not in the 2.x branch that we are using.
-
-This patch comes from OpenEmbedded, and has originally been written by
-Khem Raj <raj.khem@gmail.com>.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- gl/stdio.in.h | 2 ++
- lib/gl/stdio.in.h | 2 ++
- 2 files changed, 4 insertions(+)
-
-diff --git a/gl/stdio.in.h b/gl/stdio.in.h
-index 9dc7c4a..8cb19d7 100644
---- a/gl/stdio.in.h
-+++ b/gl/stdio.in.h
-@@ -710,11 +710,13 @@ _GL_CXXALIAS_RPL (gets, char *, (char *s));
- _GL_CXXALIAS_SYS (gets, char *, (char *s));
- # undef gets
- # endif
-+# if defined gets
- _GL_CXXALIASWARN (gets);
- /* It is very rare that the developer ever has full control of stdin,
- so any use of gets warrants an unconditional warning. Assume it is
- always declared, since it is required by C89. */
- _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
-+# endif
- #endif
-
-
-diff --git a/lib/gl/stdio.in.h b/lib/gl/stdio.in.h
-index 03bea2a..cb6483b 100644
---- a/lib/gl/stdio.in.h
-+++ b/lib/gl/stdio.in.h
-@@ -710,11 +710,13 @@ _GL_CXXALIAS_RPL (gets, char *, (char *s));
- _GL_CXXALIAS_SYS (gets, char *, (char *s));
- # undef gets
- # endif
-+# if defined gets
- _GL_CXXALIASWARN (gets);
- /* It is very rare that the developer ever has full control of stdin,
- so any use of gets warrants an unconditional warning. Assume it is
- always declared, since it is required by C89. */
- _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
-+# endif
- #endif
-
-
---
-1.7.9.5
-
diff --git a/package/gnutls/gnutls.mk b/package/gnutls/gnutls.mk
index 506d7f5..e27c1a3 100644
--- a/package/gnutls/gnutls.mk
+++ b/package/gnutls/gnutls.mk
@@ -4,18 +4,30 @@
#
#############################################################
-GNUTLS_VERSION = 2.12.20
-GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.bz2
+GNUTLS_VERSION = 3.1.5
+GNUTLS_SOURCE = gnutls-$(GNUTLS_VERSION).tar.xz
GNUTLS_SITE = $(BR2_GNU_MIRROR)/gnutls
-GNUTLS_LICENSE = GPLv3+ LGPLv2.1+
+GNUTLS_LICENSE = GPLv3+ LGPLv3
GNUTLS_LICENSE_FILES = COPYING lib/COPYING
-GNUTLS_DEPENDENCIES = host-pkgconf libgcrypt $(if $(BR2_PACKAGE_ZLIB),zlib)
-GNUTLS_CONF_ENV = acl_cv_rpath=no \
+GNUTLS_DEPENDENCIES = host-pkgconf nettle $(if $(BR2_PACKAGE_ZLIB),zlib)
+GNUTLS_CONF_OPT = --with-libnettle-prefix=$(STAGING_DIR)/usr --disable-rpath
+GNUTLS_CONF_ENV = gl_cv_socket_ipv6=$(if $(BR2_INET_IPV6),yes,no) \
ac_cv_header_wchar_h=$(if $(BR2_USE_WCHAR),yes,no) \
gt_cv_c_wchar_t=$(if $(BR2_USE_WCHAR),yes,no) \
gt_cv_c_wint_t=$(if $(BR2_USE_WCHAR),yes,no)
-GNUTLS_CONF_OPT = --with-libgcrypt --without-libgcrypt-prefix \
- --without-p11-kit --disable-rpath
GNUTLS_INSTALL_STAGING = YES
+# Some examples in doc/examples use wchar
+define GNUTLS_DISABLE_DOCS
+ $(SED) 's/ doc / /' $(@D)/Makefile.in
+endef
+
+define GNUTLS_DISABLE_TOOLS
+ $(SED) 's/\$$(PROGRAMS)//' $(@D)/src/Makefile.in
+ $(SED) 's/) install-exec-am/)/' $(@D)/src/Makefile.in
+endef
+
+GNUTLS_POST_PATCH_HOOKS += GNUTLS_DISABLE_DOCS
+GNUTLS_POST_PATCH_HOOKS += $(if $(BR2_PACKAGE_GNUTLS_TOOLS),,GNUTLS_DISABLE_TOOLS)
+
$(eval $(autotools-package))
^ permalink raw reply related
* [Buildroot] [git commit] wpa_supplicant: remove gnutls support
From: Peter Korsgaard @ 2012-12-28 20:55 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=c89cc4b4b311b927d0c02af5717c6cc1150a1480
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
wpa_supplicant isn't API compatible with gnutls3 so remove support.
It's probably hardly used since openssl is far more common, and
wpa_supplicant can use its internal routines if it's not available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/wpa_supplicant/wpa_supplicant.mk | 9 +--------
1 files changed, 1 insertions(+), 8 deletions(-)
diff --git a/package/wpa_supplicant/wpa_supplicant.mk b/package/wpa_supplicant/wpa_supplicant.mk
index 71be11f..3830d65 100644
--- a/package/wpa_supplicant/wpa_supplicant.mk
+++ b/package/wpa_supplicant/wpa_supplicant.mk
@@ -59,7 +59,7 @@ define WPA_SUPPLICANT_LIBTOMMATH_CONFIG
$(SED) 's/\(#\)\(CONFIG_INTERNAL_LIBTOMMATH.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
endef
-# Try to use openssl or gnutls if it's already available
+# Try to use openssl if it's already available
ifeq ($(BR2_PACKAGE_OPENSSL),y)
WPA_SUPPLICANT_DEPENDENCIES += openssl
define WPA_SUPPLICANT_TLS_CONFIG
@@ -67,17 +67,10 @@ define WPA_SUPPLICANT_TLS_CONFIG
$(SED) 's/\(#\)\(CONFIG_EAP_PWD.*\)/\2/' $(WPA_SUPPLICANT_CONFIG)
endef
else
-ifeq ($(BR2_PACKAGE_GNUTLS),y)
- WPA_SUPPLICANT_DEPENDENCIES += gnutls
-define WPA_SUPPLICANT_TLS_CONFIG
- $(SED) 's/\(#\)\(CONFIG_TLS=\).*/\2gnutls/' $(WPA_SUPPLICANT_CONFIG)
-endef
-else
define WPA_SUPPLICANT_TLS_CONFIG
$(SED) 's/\(#\)\(CONFIG_TLS=\).*/\2internal/' $(WPA_SUPPLICANT_CONFIG)
endef
endif
-endif
ifeq ($(BR2_PACKAGE_DBUS),y)
WPA_SUPPLICANT_DEPENDENCIES += host-pkgconf dbus
^ permalink raw reply related
* [Buildroot] [git commit] ntfs-3g: needs libgcrypt
From: Peter Korsgaard @ 2012-12-28 20:55 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=2007e3b1ef5e6e2e646750496c7496ce831aae01
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Now that we've moved to gnutls 3.x which no longer uses libgcrypt we
need to pull it in as a dependency for ntfs-3g encrypted volume support
to avoid build breakage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/ntfs-3g/Config.in | 1 +
package/ntfs-3g/ntfs-3g.mk | 2 +-
2 files changed, 2 insertions(+), 1 deletions(-)
diff --git a/package/ntfs-3g/Config.in b/package/ntfs-3g/Config.in
index 5301038..1d3e2fb 100644
--- a/package/ntfs-3g/Config.in
+++ b/package/ntfs-3g/Config.in
@@ -17,6 +17,7 @@ if BR2_PACKAGE_NTFS_3G
config BR2_PACKAGE_NTFS_3G_ENCRYPTED
bool "encrypted volumes"
select BR2_PACKAGE_GNUTLS
+ select BR2_PACKAGE_LIBGCRYPT
help
Enable support for NTFS encrypted volumes.
diff --git a/package/ntfs-3g/ntfs-3g.mk b/package/ntfs-3g/ntfs-3g.mk
index d2e6861..cefb73a 100644
--- a/package/ntfs-3g/ntfs-3g.mk
+++ b/package/ntfs-3g/ntfs-3g.mk
@@ -23,7 +23,7 @@ endif
ifeq ($(BR2_PACKAGE_NTFS_3G_ENCRYPTED),y)
NTFS_3G_CONF_ENV += LIBGCRYPT_CONFIG=$(STAGING_DIR)/usr/bin/libgcrypt-config
NTFS_3G_CONF_OPT += --enable-crypto
- NTFS_3G_DEPENDENCIES += gnutls
+ NTFS_3G_DEPENDENCIES += gnutls libgcrypt
endif
ifneq ($(BR2_PACKAGE_NTFS_3G_NTFSPROGS),y)
^ permalink raw reply related
* [Buildroot] [git commit] glib-networking: fix build failure with gnutls3
From: Peter Korsgaard @ 2012-12-28 20:56 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=484652cbd8d4a647f7833b2e032d0d37147e8424
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/glib-networking/glib-networking.mk | 7 +++++++
1 files changed, 7 insertions(+), 0 deletions(-)
diff --git a/package/glib-networking/glib-networking.mk b/package/glib-networking/glib-networking.mk
index b1eec4d..e8d71e5 100644
--- a/package/glib-networking/glib-networking.mk
+++ b/package/glib-networking/glib-networking.mk
@@ -25,4 +25,11 @@ else
GLIB_NETWORKING_CONF_OPT += --without-gnutls
endif
+# gnutls 3.x+ doesn't use libgcrypt, it uses nettle/hogweed
+define GLIB_NETWORKING_NO_LIBGCRYPT
+ $(SED) 's:#include <gcrypt.h>::' $(@D)/tls/gnutls/gtlsbackend-gnutls.c
+endef
+
+GLIB_NETWORKING_POST_EXTRACT_HOOKS += GLIB_NETWORKING_NO_LIBGCRYPT
+
$(eval $(autotools-package))
^ permalink raw reply related
* [Buildroot] [pull request v3] Pull request for branch yem-root-passwd
From: Yann E. MORIN @ 2012-12-28 21:20 UTC (permalink / raw)
To: buildroot
Hello All!
This is iteration #3 for setting the root password from the configuration
menu:
- first patch adds the basic functionality:
- plain text password in menuconfig
- MD5-encrypted in /etc/shadow
- second patch adds additional encryption methods
There has been previous review of this series by Arnout, who suggested
dropping patch #2, and only use an MD5-encrypted password. Since MD5 is now
considered to be a weak hash, stronger alternatives may be usefull for the
security-conscious lurking among us. That's why I kept (resurrected) that
second patch.
Arnout also objected to having the root password in clear in the .config,
and recommended that the user enters the already-encrypted password. That
has, IMHO, a few drawbacks, in that it requires the user actually _reads_
the help text, switch to an alternate terminal, generates a password, and
copy-pastes it back in the initial terminal with the menuconfig. OTOH, if
the user forgets his/her password, he/she can recover it by looking at the
.config file. That's why I still advocates for entering a clear-text
password in the menuconfig.
Any more comments are welcome!
The following changes since commit 4848386446b937d4d0d9d3e9489932ca3fcb1003:
libffi: fix mips build failures (2012-12-28 16:55:09 +0100)
are available in the git repository at:
git://gitorious.org/buildroot/buildroot.git yem-root-passwd
Yann E. MORIN (2):
target: add option to set the root password
target: add different methods to encode the root password
support/dependencies/dependencies.sh | 9 +++++
system/Config.in | 67 ++++++++++++++++++++++++++++++++++
system/system.mk | 15 ++++++++
3 files changed, 91 insertions(+), 0 deletions(-)
Regards,
Yann E. MORIN
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] [PATCH 1/2] target: add option to set the root password
From: Yann E. MORIN @ 2012-12-28 21:20 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1356728899.git.yann.morin.1998@free.fr>
Add an option in the menuconfig to specify a root password.
If set to empty, no root password is created; otherwise, the password is
encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
MD5 is widely available, not-so-strong, but not-so-weak either).
Add a check for 'mkpasswd' as a new dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
---
Switched to using MD5 as per Arnout's suggestion:
http://lists.busybox.net/pipermail/buildroot/2012-September/058712.html
---
support/dependencies/dependencies.sh | 9 +++++++++
system/Config.in | 21 +++++++++++++++++++++
system/system.mk | 14 ++++++++++++++
3 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/support/dependencies/dependencies.sh b/support/dependencies/dependencies.sh
index 7a02512..c86a5d0 100755
--- a/support/dependencies/dependencies.sh
+++ b/support/dependencies/dependencies.sh
@@ -158,6 +158,7 @@ if grep ^BR2_TOOLCHAIN_BUILDROOT=y $CONFIG_FILE > /dev/null && \
exit 1 ;
fi
fi
+
if grep -q ^BR2_PACKAGE_CLASSPATH=y $CONFIG_FILE ; then
for prog in javac jar; do
if ! which $prog > /dev/null ; then
@@ -166,3 +167,11 @@ if grep -q ^BR2_PACKAGE_CLASSPATH=y $CONFIG_FILE ; then
fi
done
fi
+
+if grep -E '^TARGET_GENERIC_ROOT_PASSWD=".+"$' $CONFIG_FILE > /dev/null 2>&1; then
+ if ! which mkpasswd > /dev/null 2>&1; then
+ /bin/echo -e "\nYou need the 'mkpasswd' utility to set the root password\n"
+ exit 1
+ fi
+
+fi
diff --git a/system/Config.in b/system/Config.in
index a557ea0..deead86 100644
--- a/system/Config.in
+++ b/system/Config.in
@@ -12,6 +12,27 @@ config BR2_TARGET_GENERIC_ISSUE
help
Select system banner (/etc/issue) to be displayed at login.
+config BR2_TARGET_GENERIC_ROOT_PASSWD
+ string "root password"
+ default ""
+ help
+ Set the initial root password (in clear). It will be md5-encrypted.
+
+ If set to empty (the default), then no root password will be set,
+ and root will need no password to log in.
+
+ WARNING! WARNING!
+ Although pretty strong, MD5 is now an old hash function, and
+ suffers from som weaknesses, which makes it susceptible to attacks.
+ It is showing its age, so this root password should not be trusted
+ to properly secure any product that can be shipped to the wide,
+ hostile world.
+
+ WARNING! WARNING!
+ The password appears in clear in the .config file, and may appear
+ in the build log! Avoid using a valuable password if either the
+ .config file or the build log may be distributed!
+
choice
prompt "/dev management"
default BR2_ROOTFS_DEVICE_CREATION_STATIC
diff --git a/system/system.mk b/system/system.mk
index 353d0ba..a23feef 100644
--- a/system/system.mk
+++ b/system/system.mk
@@ -1,5 +1,6 @@
TARGET_GENERIC_HOSTNAME:=$(call qstrip,$(BR2_TARGET_GENERIC_HOSTNAME))
TARGET_GENERIC_ISSUE:=$(call qstrip,$(BR2_TARGET_GENERIC_ISSUE))
+TARGET_GENERIC_ROOT_PASSWD:=$(call qstrip,$(BR2_TARGET_GENERIC_ROOT_PASSWD))
TARGET_GENERIC_GETTY:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT))
TARGET_GENERIC_GETTY_BAUDRATE:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_BAUDRATE))
TARGET_GENERIC_GETTY_TERM:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_TERM))
@@ -14,6 +15,13 @@ target-generic-issue:
mkdir -p $(TARGET_DIR)/etc
echo "$(TARGET_GENERIC_ISSUE)" > $(TARGET_DIR)/etc/issue
+target-no-root-passwd:
+ $(SED) "s/^root:[^:]*:/root::/" $(TARGET_DIR)/etc/shadow
+
+target-root-passwd:
+ root_passwd="$$( mkpasswd -m md5 "$(TARGET_GENERIC_ROOT_PASSWD)" )"; \
+ $(SED) "s,^root::,root:$${root_passwd}:," $(TARGET_DIR)/etc/shadow
+
target-generic-getty-busybox:
$(SED) '/# GENERIC_SERIAL$$/s~^.*#~$(TARGET_GENERIC_GETTY)::respawn:/sbin/getty -L $(TARGET_GENERIC_GETTY) $(TARGET_GENERIC_GETTY_BAUDRATE) $(TARGET_GENERIC_GETTY_TERM) #~' \
$(TARGET_DIR)/etc/inittab
@@ -40,6 +48,12 @@ ifneq ($(TARGET_GENERIC_ISSUE),)
TARGETS += target-generic-issue
endif
+ifneq ($(TARGET_GENERIC_ROOT_PASSWD),)
+TARGETS += target-root-passwd
+else
+TARGETS += target-no-root-passwd
+endif
+
ifeq ($(BR2_ROOTFS_SKELETON_DEFAULT),y)
ifeq ($(BR2_PACKAGE_SYSVINIT),y)
TARGETS += target-generic-getty-sysvinit
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [PATCH 2/2] target: add different methods to encode the root password
From: Yann E. MORIN @ 2012-12-28 21:20 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1356728899.git.yann.morin.1998@free.fr>
The password can be encoded in different ways (from the weakest
to the strongest): des, md5, sha-256, sha-512
Add a choice entry to select the method, defaulting to 'md5'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
system/Config.in | 46 ++++++++++++++++++++++++++++++++++++++++++++++
system/system.mk | 3 ++-
2 files changed, 48 insertions(+), 1 deletions(-)
diff --git a/system/Config.in b/system/Config.in
index deead86..2c90e8a 100644
--- a/system/Config.in
+++ b/system/Config.in
@@ -34,6 +34,52 @@ config BR2_TARGET_GENERIC_ROOT_PASSWD
.config file or the build log may be distributed!
choice
+ bool "root password encoding"
+ depends on BR2_TARGET_GENERIC_ROOT_PASSWD != ""
+ default BR2_TARGET_GENERIC_ROOT_PASSWD_MD5
+
+config BR2_TARGET_GENERIC_ROOT_PASSWD_DES
+ bool "des"
+ help
+ Use standard 56-bit DES-based crypt(3).
+
+ Old, wildly available, but also the weakest.
+
+config BR2_TARGET_GENERIC_ROOT_PASSWD_MD5
+ bool "md5"
+ help
+ Use MD5 to encode the password.
+
+ The default, wildly available, and pretty good.
+
+config BR2_TARGET_GENERIC_ROOT_PASSWD_SHA256
+ bool "sha-256"
+ help
+ Use SHA256 to encode the password.
+
+ Very strong, but not ubiquitous, although available in glibc
+ for some time now. Choose only if you are sure your C library
+ understands SHA256 passwords.
+
+config BR2_TARGET_GENERIC_ROOT_PASSWD_SHA512
+ bool "sha-512"
+ help
+ Use SHA512 to encode the password.
+
+ Extremely strong, but not ubiquitous, although available in glibc
+ for some time now. Choose only if you are sure your C library
+ understands SHA512 passwords.
+
+endchoice # root passwd encoding
+
+config BR2_TARGET_GENERIC_ROOT_PASSWD_METHOD
+ string
+ default "des" if BR2_TARGET_GENERIC_ROOT_PASSWD_DES
+ default "md5" if BR2_TARGET_GENERIC_ROOT_PASSWD_MD5
+ default "sha-256" if BR2_TARGET_GENERIC_ROOT_PASSWD_SHA256
+ default "sha-512" if BR2_TARGET_GENERIC_ROOT_PASSWD_SHA512
+
+choice
prompt "/dev management"
default BR2_ROOTFS_DEVICE_CREATION_STATIC
diff --git a/system/system.mk b/system/system.mk
index a23feef..f5a8310 100644
--- a/system/system.mk
+++ b/system/system.mk
@@ -1,6 +1,7 @@
TARGET_GENERIC_HOSTNAME:=$(call qstrip,$(BR2_TARGET_GENERIC_HOSTNAME))
TARGET_GENERIC_ISSUE:=$(call qstrip,$(BR2_TARGET_GENERIC_ISSUE))
TARGET_GENERIC_ROOT_PASSWD:=$(call qstrip,$(BR2_TARGET_GENERIC_ROOT_PASSWD))
+TARGET_GENERIC_ROOT_PASSWD_METHOD:=$(call qstrip,$(BR2_TARGET_GENERIC_ROOT_PASSWD_METHOD))
TARGET_GENERIC_GETTY:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_PORT))
TARGET_GENERIC_GETTY_BAUDRATE:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_BAUDRATE))
TARGET_GENERIC_GETTY_TERM:=$(call qstrip,$(BR2_TARGET_GENERIC_GETTY_TERM))
@@ -19,7 +20,7 @@ target-no-root-passwd:
$(SED) "s/^root:[^:]*:/root::/" $(TARGET_DIR)/etc/shadow
target-root-passwd:
- root_passwd="$$( mkpasswd -m md5 "$(TARGET_GENERIC_ROOT_PASSWD)" )"; \
+ root_passwd="$$( mkpasswd -m "$(TARGET_GENERIC_ROOT_PASSWD_METHOD)" "$(TARGET_GENERIC_ROOT_PASSWD)" )"; \
$(SED) "s,^root::,root:$${root_passwd}:," $(TARGET_DIR)/etc/shadow
target-generic-getty-busybox:
--
1.7.2.5
^ permalink raw reply related
* [Buildroot] [pull request] Pull request for branch yem-tvheadend
From: Yann E. MORIN @ 2012-12-28 21:26 UTC (permalink / raw)
To: buildroot
In-Reply-To: <cover.1356719913.git.yann.morin.1998@free.fr>
Hello All!
On Friday 28 December 2012 Yann E. MORIN wrote:
> Here's a short series to add TVHeadend.
After Thomas' review, I've pushed an updated series, to be pulled from
the same location.
Regards,
Yann E. MORIN.
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
* [Buildroot] [git commit] network-manager: needs libgcrypt
From: Peter Korsgaard @ 2012-12-28 21:26 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=ecb73fbe0ced07034dc637eff4653f732e7487b3
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Since we moved to gnutls 3.x series which doesn't use libgcrypt we need
to pull it in as a dependency to avoid build breakage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/network-manager/Config.in | 1 +
package/network-manager/network-manager.mk | 3 ++-
2 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/package/network-manager/Config.in b/package/network-manager/Config.in
index f2544da..9b84083 100644
--- a/package/network-manager/Config.in
+++ b/package/network-manager/Config.in
@@ -11,6 +11,7 @@ config BR2_PACKAGE_NETWORK_MANAGER
select BR2_PACKAGE_UDEV
select BR2_PACKAGE_UDEV_ALL_EXTRAS
select BR2_PACKAGE_GNUTLS
+ select BR2_PACKAGE_LIBGCRYPT
select BR2_PACKAGE_LIBNL
select BR2_PACKAGE_UTIL_LINUX
select BR2_PACKAGE_UTIL_LINUX_LIBUUID
diff --git a/package/network-manager/network-manager.mk b/package/network-manager/network-manager.mk
index d14c98d..2a68c96 100644
--- a/package/network-manager/network-manager.mk
+++ b/package/network-manager/network-manager.mk
@@ -7,7 +7,8 @@ NETWORK_MANAGER_VERSION = 0.9.2.0
NETWORK_MANAGER_SOURCE = NetworkManager-$(NETWORK_MANAGER_VERSION).tar.bz2
NETWORK_MANAGER_SITE = http://ftp.gnome.org/pub/GNOME/sources/NetworkManager/0.9/
NETWORK_MANAGER_INSTALL_STAGING = YES
-NETWORK_MANAGER_DEPENDENCIES = host-pkgconf udev dbus-glib libnl wireless_tools gnutls util-linux
+NETWORK_MANAGER_DEPENDENCIES = host-pkgconf udev dbus-glib libnl gnutls \
+ libgcrypt wireless_tools util-linux
NETWORK_MANAGER_CONF_ENV = \
ac_cv_path_LIBGCRYPT_CONFIG=$(STAGING_DIR)/usr/bin/libgcrypt-config
^ permalink raw reply related
* [Buildroot] [PATCH 1/2] target: add option to set the root password
From: Thomas Petazzoni @ 2012-12-28 21:26 UTC (permalink / raw)
To: buildroot
In-Reply-To: <751d161336cd6e35187e2faa67f456335908222c.1356728899.git.yann.morin.1998@free.fr>
Dear Yann E. MORIN,
On Fri, 28 Dec 2012 22:20:53 +0100, Yann E. MORIN wrote:
> Add an option in the menuconfig to specify a root password.
>
> If set to empty, no root password is created; otherwise, the password is
> encrypted using MD5 (MD5 is not the default for crypt(3), DES-56 is, but
> MD5 is widely available, not-so-strong, but not-so-weak either).
>
> Add a check for 'mkpasswd' as a new dependency.
>
> Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
> Cc: Arnout Vandecappelle <arnout@mind.be>
> ---
> Switched to using MD5 as per Arnout's suggestion:
> http://lists.busybox.net/pipermail/buildroot/2012-September/058712.html
> ---
> support/dependencies/dependencies.sh | 9 +++++++++
> system/Config.in | 21 +++++++++++++++++++++
> system/system.mk | 14 ++++++++++++++
> 3 files changed, 44 insertions(+), 0 deletions(-)
>
> diff --git a/support/dependencies/dependencies.sh b/support/dependencies/dependencies.sh
> index 7a02512..c86a5d0 100755
> --- a/support/dependencies/dependencies.sh
> +++ b/support/dependencies/dependencies.sh
> @@ -158,6 +158,7 @@ if grep ^BR2_TOOLCHAIN_BUILDROOT=y $CONFIG_FILE > /dev/null && \
> exit 1 ;
> fi
> fi
> +
> if grep -q ^BR2_PACKAGE_CLASSPATH=y $CONFIG_FILE ; then
> for prog in javac jar; do
> if ! which $prog > /dev/null ; then
> @@ -166,3 +167,11 @@ if grep -q ^BR2_PACKAGE_CLASSPATH=y $CONFIG_FILE ; then
> fi
> done
> fi
> +
> +if grep -E '^TARGET_GENERIC_ROOT_PASSWD=".+"$' $CONFIG_FILE > /dev/null 2>&1; then
I guess it should be BR2_TARGET_GENERIC_ROOT_PASSWD since you have a ^
at the beginning of the regexp.
> + if ! which mkpasswd > /dev/null 2>&1; then
> + /bin/echo -e "\nYou need the 'mkpasswd' utility to set the root password\n"
Also mention that mkpasswd is typically bundled within the whois
package in distros (at least in Debian/Ubuntu), because it may not be
very obvious.
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply
* [Buildroot] [git commit] connman: bump to version 1.10
From: Peter Korsgaard @ 2012-12-28 21:26 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=6fcb68511e317650b028a911b8fcd7bd241fd89b
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/connman/connman.mk | 4 +++-
1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/package/connman/connman.mk b/package/connman/connman.mk
index 2c376c9..73ea70d 100644
--- a/package/connman/connman.mk
+++ b/package/connman/connman.mk
@@ -4,10 +4,12 @@
#
#######################################################
-CONNMAN_VERSION = 1.9
+CONNMAN_VERSION = 1.10
CONNMAN_SITE = $(BR2_KERNEL_MIRROR)/linux/network/connman/
CONNMAN_DEPENDENCIES = libglib2 dbus iptables gnutls
CONNMAN_INSTALL_STAGING = YES
+CONNMAN_LICENSE = GPLv2
+CONNMAN_LICENSE_FILES = COPYING
CONNMAN_CONF_OPT += --localstatedir=/var \
$(if $(BR2_PACKAGE_CONNMAN_THREADS),--enable-threads,--disable-threads) \
$(if $(BR2_PACKAGE_CONNMAN_DEBUG),--enable-debug,--disable-debug) \
^ permalink raw reply related
* [Buildroot] [PATCH 1/7] gnutls: bump to version 3.1.5
From: Peter Korsgaard @ 2012-12-28 21:27 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1356724043-8879-1-git-send-email-gustavo@zacarias.com.ar>
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
Gustavo> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Committed series, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] nettle: add license info
From: Peter Korsgaard @ 2012-12-28 21:28 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=761ae9c3e13da753318851c4c71ab7fc8aa5a9db
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
package/nettle/nettle.mk | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/package/nettle/nettle.mk b/package/nettle/nettle.mk
index ef7640a..ae09ecc 100644
--- a/package/nettle/nettle.mk
+++ b/package/nettle/nettle.mk
@@ -2,6 +2,8 @@ NETTLE_VERSION = 2.5
NETTLE_SITE = http://www.lysator.liu.se/~nisse/archive
NETTLE_DEPENDENCIES = gmp
NETTLE_INSTALL_STAGING = YES
+NETTLE_LICENSE = LGPLv2.1+
+NETTLE_LICENSE_FILES = COPYING.LIB
define NETTLE_DITCH_DEBUGGING_CFLAGS
$(SED) '/CFLAGS/ s/ -ggdb3//' $(@D)/configure
^ permalink raw reply related
* [Buildroot] [PATCH] nettle: add license info
From: Peter Korsgaard @ 2012-12-28 21:28 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1356727193-9272-1-git-send-email-gustavo@zacarias.com.ar>
>>>>> "Gustavo" == Gustavo Zacarias <gustavo@zacarias.com.ar> writes:
Gustavo> Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [pull request] Pull request for branch yem-tvheadend
From: Peter Korsgaard @ 2012-12-28 21:34 UTC (permalink / raw)
To: buildroot
In-Reply-To: <201212282226.18134.yann.morin.1998@free.fr>
>>>>> "Yann" == Yann E MORIN <yann.morin.1998@free.fr> writes:
Yann> Hello All!
Yann> On Friday 28 December 2012 Yann E. MORIN wrote:
>> Here's a short series to add TVHeadend.
Yann> After Thomas' review, I've pushed an updated series, to be pulled from
Yann> the same location.
It's a short series, could you please resend it (easier for review).
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] xserver_xorg-server: fix build on AArch64
From: Peter Korsgaard @ 2012-12-28 21:45 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=695edcbabe5919fe52b593553c409e7ad9a4af83
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Fixes the following build issue:
Making all in fb
CC libfb_la-fb24_32.lo
In file included from fb24_32.c:30:0:
fb.h:98:2: error: #error "GLYPHPADBYTES must be 4"
See:
http://autobuild.buildroot.org/results/9135238abcde29918f8cb61002f1fb9279884a47/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
.../xserver_xorg-server-aarch64-support.patch | 23 ++++++++++++++++++++
1 files changed, 23 insertions(+), 0 deletions(-)
diff --git a/package/x11r7/xserver_xorg-server/xserver_xorg-server-aarch64-support.patch b/package/x11r7/xserver_xorg-server/xserver_xorg-server-aarch64-support.patch
new file mode 100644
index 0000000..ec497c8
--- /dev/null
+++ b/package/x11r7/xserver_xorg-server/xserver_xorg-server-aarch64-support.patch
@@ -0,0 +1,23 @@
+Add necessary definitions for AArch64
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+Index: xserver_xorg-server-1.9.4/include/servermd.h
+===================================================================
+--- xserver_xorg-server-1.9.4.orig/include/servermd.h 2009-11-04 20:31:46.000000000 +0100
++++ xserver_xorg-server-1.9.4/include/servermd.h 2012-12-28 18:16:55.000000000 +0100
+@@ -68,6 +68,14 @@
+ * GLYPHPADBYTES is used.
+ */
+
++#ifdef __aarch64__
++
++# define IMAGE_BYTE_ORDER LSBFirst
++# define BITMAP_BIT_ORDER LSBFirst
++# define GLYPHPADBYTES 4
++
++#endif
++
+ #ifdef __avr32__
+
+ #define IMAGE_BYTE_ORDER MSBFirst
^ permalink raw reply related
* [Buildroot] [PATCH 1/2] xserver_xorg-server: fix build on AArch64
From: Peter Korsgaard @ 2012-12-28 21:46 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1356727276-13075-1-git-send-email-thomas.petazzoni@free-electrons.com>
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> Fixes the following build issue:
Thomas> Making all in fb
Thomas> CC libfb_la-fb24_32.lo
Thomas> In file included from fb24_32.c:30:0:
Thomas> fb.h:98:2: error: #error "GLYPHPADBYTES must be 4"
Committed, thanks.
Don't forget to send patch upstream.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [git commit] diffutils: fix build with recent glibc
From: Peter Korsgaard @ 2012-12-28 21:47 UTC (permalink / raw)
To: buildroot
commit: http://git.buildroot.net/buildroot/commit/?id=653d64c5094d34ade03d0c30ead151ac9223edbd
branch: http://git.buildroot.net/buildroot/commit/?id=refs/heads/master
Fixes the following build problem with recent toolchains:
In file included from exclude.c:31:0:
./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
CC hard-locale.o
make[4]: *** [exclude.o] Error 1
make[4]: *** Waiting for unfinished jobs....
In file included from stdio-safer.h:20:0,
from freopen-safer.c:22:
./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
---
...tils-gets-no-longer-exists-in-eglibc-2.16.patch | 26 ++++++++++++++++++++
1 files changed, 26 insertions(+), 0 deletions(-)
diff --git a/package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch b/package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch
new file mode 100644
index 0000000..4785718
--- /dev/null
+++ b/package/diffutils/diffutils-gets-no-longer-exists-in-eglibc-2.16.patch
@@ -0,0 +1,26 @@
+Handle the fact that gets() no longer exists in glibc >= 2.16
+
+The problem has been fixed upstream, but no release containing the fix
+has been made so far.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+Index: b/lib/stdio.in.h
+===================================================================
+--- a/lib/stdio.in.h
++++ b/lib/stdio.in.h
+@@ -693,12 +693,14 @@
+ _GL_CXXALIAS_SYS (gets, char *, (char *s));
+ # undef gets
+ # endif
++# if defined gets
+ _GL_CXXALIASWARN (gets);
+ /* It is very rare that the developer ever has full control of stdin,
+ so any use of gets warrants an unconditional warning. Assume it is
+ always declared, since it is required by C89. */
+ _GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
+ #endif
++#endif
+
+
+ #if @GNULIB_OBSTACK_PRINTF@ || @GNULIB_OBSTACK_PRINTF_POSIX@
^ permalink raw reply related
* [Buildroot] [PATCH 2/2] diffutils: fix build with recent glibc
From: Peter Korsgaard @ 2012-12-28 21:47 UTC (permalink / raw)
To: buildroot
In-Reply-To: <1356727282-13118-1-git-send-email-thomas.petazzoni@free-electrons.com>
>>>>> "Thomas" == Thomas Petazzoni <thomas.petazzoni@free-electrons.com> writes:
Thomas> Fixes the following build problem with recent toolchains:
Thomas> In file included from exclude.c:31:0:
Thomas> ./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
Thomas> CC hard-locale.o
Thomas> make[4]: *** [exclude.o] Error 1
Thomas> make[4]: *** Waiting for unfinished jobs....
Thomas> In file included from stdio-safer.h:20:0,
Thomas> from freopen-safer.c:22:
Thomas> ./stdio.h:1012:1: error: 'gets' undeclared here (not in a function)
Committed, thanks.
--
Bye, Peter Korsgaard
^ permalink raw reply
* [Buildroot] [pull request] Pull request for branch yem-tvheadend
From: Yann E. MORIN @ 2012-12-28 21:48 UTC (permalink / raw)
To: buildroot
Hello All!
Here's a short series to add TVHeadend.
TVHeadend implements a PVR/DVR solution, which can record either from
a broadcast tunner (DVB-{T,S,C}, or ATSC), or IPTV multicast streams.
TVHeadend can be used as a backend by media centers, such as XBMC, or
it can be used stand-alone.
Changes v2 -> v3:
- fixed copy-paste and indentation (Thomas)
- added desc to tvheadend patch (Thomas)
Changes v1 -> v2:
- got rid of tvheadend user (Peter)
- added dvb-apps package, get rid of cutom download (Thomas)
The following changes since commit 4848386446b937d4d0d9d3e9489932ca3fcb1003:
libffi: fix mips build failures (2012-12-28 16:55:09 +0100)
are available in the git repository at:
git://gitorious.org/buildroot/buildroot.git yem-tvheadend
Yann E. MORIN (2):
package/dvb-apps: new package
package/tvheadend: new package
package/Config.in | 1 +
package/dvb-apps/dvb-apps.mk | 32 ++++++++++
package/tvheadend/Config.in | 19 ++++++
package/tvheadend/S99tvheadend | 54 ++++++++++++++++++
package/tvheadend/accesscontrol.1 | 13 ++++
package/tvheadend/etc.default.tvheadend | 7 ++
.../tvheadend-no-auto-download-dvbscans.patch | 60 ++++++++++++++++++++
package/tvheadend/tvheadend.mk | 43 ++++++++++++++
8 files changed, 229 insertions(+), 0 deletions(-)
create mode 100644 package/dvb-apps/dvb-apps.mk
create mode 100644 package/tvheadend/Config.in
create mode 100644 package/tvheadend/S99tvheadend
create mode 100644 package/tvheadend/accesscontrol.1
create mode 100644 package/tvheadend/etc.default.tvheadend
create mode 100644 package/tvheadend/tvheadend-no-auto-download-dvbscans.patch
create mode 100644 package/tvheadend/tvheadend.mk
Regards,
Yann E. MORIN
--
.-----------------.--------------------.------------------.--------------------.
| Yann E. MORIN | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software Designer | \ / CAMPAIGN | ___ |
| +33 223 225 172 `------------.-------: X AGAINST | \e/ There is no |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL | v conspiracy. |
'------------------------------^-------^------------------^--------------------'
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox