From: "Łukasz Chrustek" <skidoo@tlen.pl>
To: Sage Weil <sage@newdream.net>
Cc: ceph-devel@vger.kernel.org
Subject: Re: problem with removing osd
Date: Thu, 29 Dec 2016 21:20:30 +0100 [thread overview]
Message-ID: <109878557.20161229212030@tlen.pl> (raw)
In-Reply-To: <alpine.DEB.2.11.1612291908472.10615@piezo.novalocal>
Hi,
>>
>> # ceph osd tree
>> ID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-AFFINITY
>> -7 16.89590 root ssd-disks
>> -11 0 host ssd1
>> 598798032 0 osd.598798032 DNE 0
> Yikes!
Yes... indeed, I don't like this number too...
>> 21940 0 osd.21940 DNE 0
>> 71 0 osd.71 DNE 0
>>
>> My question is how to delete this osds without direct editing crushmap
>> ? It is production system, I can't affort any service interruption :(,
>> when I try to ceph osd crush remove then ceph-mon crushes....
>>
>> I dumped crushmap, but it took 19G (!!) after decompiling (compiled
>> file is very small). So, I cleaned this file with perl (it take very
>> long time), and I have now small txt crushmap, which I edited. But is
>> there any chance that ceph will still remember somewhere about this
>> huge numbers for osds ? Is it safe to apply this cleaned crushmap to
>> cluster ?
> It sounds like the problem is the OSDMap, not CRUSH per se. Can you
> attach the output from 'ceph osd dump -f json-pretty'?
It's quite big so I put it on pastebin:
http://pastebin.com/Unkk2Pa7
> Do you know how osd.598798032 got created? Or osd.21940 for that matter.
> OSD ids should be small since they are stored internally by OSDMap as a
> vector. This is probably why your mon is crashing.
[root@cc1 /etc/ceph]# ceph osd tree
ID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-AFFINITY
-7 16.89590 root ssd-intel-s3700
-11 0 host ssd-stor1
69 0 osd.69 down 0 1.00000
70 0 osd.70 down 0 1.00000
71 0 osd.71 down 0 1.00000
This the moment, when it happend:
]# for i in `seq 69 71`;do ceph osd crush remove osd.$i;done
removed item id 69 name 'osd.69' from crush map
removed item id 70 name 'osd.70' from crush map
here i press ctrl+c
2016-12-28 17:38:10.055239 7f4576d7a700 0 monclient: hunting for new mon
2016-12-28 17:38:10.055582 7f4574233700 0 -- 192.168.128.1:0/1201679761 >> 192.168.128.2:6789/0 pipe(0x7f456c023190 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7f456c024470).fault
2016-12-28 17:38:30.550622 7f4574233700 0 -- 192.168.128.1:0/1201679761 >> 192.168.128.1:6789/0 pipe(0x7f45600008c0 sd=3 :0 s=1 pgs=0 cs=0 l=1 c=0x7f4560001df0).fault
2016-12-28 17:38:54.551031 7f4574474700 0 -- 192.168.128.1:0/1201679761 >> 192.168.128.2:6789/0 pipe(0x7f45600046c0 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7f45600042b0).fault
after restart of ceph-mon:
]# ceph osd tree
ID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-AFFINITY
-7 16.89590 root ssd-intel-s3700
-11 0 host ssd-stor1
-231707408 0
22100 0 osd.22100 DNE 0
71 0 osd.71 DNE 0
and later:
[root@cc1 ~]# ceph osd crush remove osd.22100
device 'osd.22100' does not appear in the crush map
[root@cc1 ~]# ceph osd crush remove osd.71
2016-12-28 17:52:34.459668 7f426a862700 0 monclient: hunting for new mon
2016-12-28 17:52:55.238418 7f426a862700 0 monclient: hunting for new mon
2016-12-28 17:52:55.238680 7f4262ebc700 0 -- 192.168.128.1:0/692048545 >> 192.168.128.2:6789/0 pipe(0x7f4254028300 sd=4 :0 s=1 pgs=0 cs=0 l=1 c=0x7f4254026800).fault
and after another restart of ceph-mon:
]# ceph osd tree
ID WEIGHT TYPE NAME UP/DOWN REWEIGHT PRIMARY-AFFINITY
-7 16.89590 root ssd-intel-s3700
-11 0 host ssd-stor1
598798032 0 osd.598798032 DNE 0
21940 0 osd.21940 DNE 0
71 0 osd.71 DNE 0
--
Regards
Luk
next prev parent reply other threads:[~2016-12-29 20:20 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-29 15:07 problem with removing osd Łukasz Chrustek
2016-12-29 19:10 ` Sage Weil
2016-12-29 20:20 ` Łukasz Chrustek [this message]
2016-12-29 20:26 ` Sage Weil
2016-12-29 20:46 ` Łukasz Chrustek
2016-12-29 20:49 ` Sage Weil
2016-12-29 20:55 ` Łukasz Chrustek
2016-12-29 21:41 ` Sage Weil
2016-12-29 22:02 ` Łukasz Chrustek
2016-12-29 22:18 ` Sage Weil
2016-12-29 23:13 ` Brad Hubbard
2016-12-29 23:33 ` Łukasz Chrustek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=109878557.20161229212030@tlen.pl \
--to=skidoo@tlen.pl \
--cc=ceph-devel@vger.kernel.org \
--cc=sage@newdream.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox