From: Vladimir Bashkirtsev <vladimir@bashkirtsev.com>
To: Sage Weil <sage@newdream.net>
Cc: ceph-devel@vger.kernel.org
Subject: Re: PGs stuck in creating state
Date: Mon, 07 May 2012 10:24:45 +0930 [thread overview]
Message-ID: <4FA71D55.6050902@bashkirtsev.com> (raw)
In-Reply-To: <Pine.LNX.4.64.1204192207220.7024@cobra.newdream.net>
On 20/04/12 14:41, Sage Weil wrote:
> On Fri, 20 Apr 2012, Vladimir Bashkirtsev wrote:
>> Dear devs,
>>
>> First of all I would like to bow my head at your great effort! Even if ceph
>> did not reach prime time status yet it is already extremely powerful and
>> fairly stable to the point we have deployed it in live environment (still
>> backing up of course).
>>
>> I have played with ceph extensively to put it different failed modes and it
>> recovers in most cases without major issues. However when I was adding up OSDs
>> I have got 2 PGs stuck in creating mode and does not matter what I have done
>> (changing CRUSH, restarting OSDs in order to get ceph to move data around)
>> they still there. So instead of using scientific blindfold method I decided to
>> dig deeper. So here we go (please disregard stuck active+remapped as it is
>> part of another problem):
>>
>> [root@gamma tmp]# ceph -s
>> 2012-04-20 12:40:45.294969 pg v625626: 600 pgs: 2 creating, 586
>> active+clean, 12 active+remapped; 253 GB data, 767 GB used, 1292 GB / 2145 GB
>> avail
>> 2012-04-20 12:40:45.299426 mds e457: 1/1/1 up {0=2=up:active}, 2 up:standby
>> 2012-04-20 12:40:45.299549 osd e6022: 6 osds: 6 up, 6 in
>> 2012-04-20 12:40:45.299856 log 2012-04-20 12:26:43.988716 mds.0
>> 172.16.64.202:6802/21363 1 : [DBG] reconnect by client.13897
>> 172.16.64.10:0/1319861516 after 0.101633
>> 2012-04-20 12:40:45.300160 mon e1: 3 mons at
>> {0=172.16.64.200:6789/0,1=172.16.64.201:6789/0,2=172.16.64.202:6789/0}
>>
>> [root@gamma tmp]# ceph pg dump | grep creating
>> 2.1p3 0 0 0 0 0 0 0 creating
>> 0.000000 0'0 0'0 [] [] 0'0 0.000000
>> 1.1p3 0 0 0 0 0 0 0 creating
>> 0.000000 0'0 0'0 [] [] 0'0 0.000000
> Sigh.. this is exactly the problem I noticed last week that prompted the
> 'localized pgs' email. I'm working on patches to remove this
> functionality entirely as we speak, since it's a broken design in several
> ways.
>
> Once you restart your osds (be sure to control-c that 'ceph' command
> first), you should be able to wipe out those bad pgs with
>
> ceph osd pool disable_lpgs<poolname> --yes-i-really-mean-it
>
> This is in current master, and will be included in 0.46.
Have upgraded to 0.46, done disable_lpgs on all pools - still no banana.
Other ideas?
>
> Alternatively, you can just ignore those pgs for the time being. They
> are completely harmless as long as you can tolerate the ceph -s/ceph
> health noise. v0.47 should silently zap them all on upgrade.
>
> sage
>
>> My understanding is that p3 means that PG creating on osd.3 . I've tried to
>> stop and restart osd.3 - no banana. So I went to more dramatic option: lose
>> osd.3 . Completely destroyed osd.3 and rebuilt it from scratch. osd.3 came
>> back again with exactly the same PGs in creating mode - makes me think that
>> that osd.3 is not responsible for this.
>>
>> [root@gamma tmp]# ceph osd dump
>> dumped osdmap epoch 6022
>> epoch 6022
>> fsid 7719f573-4c48-4852-a27f-51c7a3fe1c1e
>> created 2012-03-31 04:47:12.130128
>> modifed 2012-04-20 12:26:56.406193
>> flags
>>
>> pool 0 'data' rep size 3 crush_ruleset 0 object_hash rjenkins pg_num 192
>> pgp_num 192 lpg_num 2 lpgp_num 2 last_change 1137 owner 0
>> crash_replay_interval 45
>> pool 1 'metadata' rep size 3 crush_ruleset 1 object_hash rjenkins pg_num 192
>> pgp_num 192 lpg_num 2 lpgp_num 2 last_change 1160 owner 0
>> pool 2 'rbd' rep size 3 crush_ruleset 2 object_hash rjenkins pg_num 192
>> pgp_num 192 lpg_num 2 lpgp_num 2 last_change 1141 owner 0
>>
>> max_osd 6
>> osd.0 up in weight 1 up_from 6001 up_thru 6018 down_at 6000
>> last_clean_interval [5980,5996) 172.16.64.200:6804/23046
>> 172.16.64.200:6805/23046 172.16.64.200:6806/23046 exists,up
>> osd.1 up in weight 1 up_from 5998 up_thru 6017 down_at 5997
>> last_clean_interval [5992,5996) 172.16.64.201:6804/27598
>> 172.16.64.201:6805/27598 172.16.64.201:6806/27598 exists,up
>> osd.2 up in weight 1 up_from 5998 up_thru 6019 down_at 5997
>> last_clean_interval [5978,5996) 172.16.64.202:6804/21457
>> 172.16.64.202:6805/21457 172.16.64.202:6806/21457 exists,up
>> osd.3 up in weight 1 up_from 5972 up_thru 6017 down_at 5970
>> last_clean_interval [5884,5969) lost_at 1163 172.16.64.203:6800/10614
>> 172.16.64.203:6801/10614 172.16.64.203:6802/10614 exists,up
>> osd.4 up in weight 1 up_from 5995 up_thru 6017 down_at 5988
>> last_clean_interval [5898,5987) 172.16.64.204:6800/16357
>> 172.16.64.204:6801/16357 172.16.64.204:6802/16357 exists,up
>> osd.5 up in weight 1 up_from 5984 up_thru 6021 down_at 5982
>> last_clean_interval [5921,5981) 172.16.64.205:6800/11346
>> 172.16.64.205:6801/11346 172.16.64.205:6803/11346 exists,up
>>
>> pg_temp 0.25 [0,1,4]
>> pg_temp 0.33 [0,1,5]
>> pg_temp 0.3e [1,0,4]
>> pg_temp 0.48 [1,0,4]
>> pg_temp 1.24 [0,1,4]
>> pg_temp 1.32 [0,1,5]
>> pg_temp 1.3d [1,0,4]
>> pg_temp 1.47 [1,0,2]
>> pg_temp 2.23 [0,1,4]
>> pg_temp 2.31 [0,1,5]
>> pg_temp 2.3c [1,0,4]
>> pg_temp 2.46 [1,0,4]
>> blacklist 172.16.64.202:6800/19544 expires 2012-04-20 12:45:43.842394
>> blacklist 172.16.64.200:6800/22946 expires 2012-04-20 12:50:17.341910
>> blacklist 172.16.64.201:6803/27504 expires 2012-04-20 12:50:20.102205
>>
>> Then I have attempted to find out what's going on with 2.1p3:
>>
>> [root@delta ceph]# ceph pg 2.1p3 query
>>
>> at this point nothing did happen - it just sits there. At least it seems so
>> but in reality:
>>
>> [root@delta ceph]# ceph -s
>> 2012-04-20 12:49:50.322103 pg v625936: 600 pgs: 2 creating, 4 stale, 400
>> active+degraded, 3 stale+peering, 174 stale+active+degraded, 1
>> down+remapped+peering, 4 active+degraded+remapped, 1 stale+remapped+peering, 3
>> stale+active+replay+degraded, 8 stale+active+degraded+remapped; 253 GB data,
>> 768 GB used, 1292 GB / 2145 GB avail; 138289/230205 degraded (60.072%)
>> 2012-04-20 12:49:50.326769 mds e457: 1/1/1 up {0=2=up:active}, 2 up:standby
>> 2012-04-20 12:49:50.326886 osd e6042: 6 osds: 1 up, 6 in
>> 2012-04-20 12:49:50.327226 log 2012-04-20 12:49:16.732954 mon.0
>> 172.16.64.200:6789/0 35 : [INF] osd.4 172.16.64.204:6800/16357 failed (by
>> osd.5 172.16.64.205:6800/11346)
>> 2012-04-20 12:49:50.327497 mon e1: 3 mons at
>> {0=172.16.64.200:6789/0,1=172.16.64.201:6789/0,2=172.16.64.202:6789/0}
>>
>> So as you can see 5 out of 6 OSDs crashed. Restarting all crashed OSDs
>> manually gets ceph back on the feet without any damage - minute later
>> everything runs as nothing happened and it is good time to see the logs. In
>> particular osd.3 log:
>>
>> 2012-04-20 12:47:38.944653 aadd6b40 --OSD::tracker-- seq: 56, time: 2012-04-20
>> 12:47:38.944641, event: started pg_info(1 pgs e6026) v1
>> 2012-04-20 12:47:38.965044 aadd6b40 --OSD::tracker-- seq: 57, time: 2012-04-20
>> 12:47:38.965017, event: waiting_for_osdmap pg_info(1 pgs e6025) v1
>> 2012-04-20 12:47:38.965098 aadd6b40 --OSD::tracker-- seq: 57, time: 2012-04-20
>> 12:47:38.965086, event: started pg_info(1 pgs e6025) v1
>> 2012-04-20 12:47:38.965179 aadd6b40 --OSD::tracker-- seq: 58, time: 2012-04-20
>> 12:47:38.965165, event: waiting_for_osdmap pg_log(1.8 epoch 6026 query_epoch
>> 6026) v2
>> 2012-04-20 12:47:38.965215 aadd6b40 --OSD::tracker-- seq: 58, time: 2012-04-20
>> 12:47:38.965202, event: started pg_log(1.8 epoch 6026 query_epoch 6026) v2
>> 2012-04-20 12:47:38.965421 aadd6b40 --OSD::tracker-- seq: 59, time: 2012-04-20
>> 12:47:38.965408, event: waiting_for_osdmap pg_info(1 pgs e6026) v1
>> 2012-04-20 12:47:38.965461 aadd6b40 --OSD::tracker-- seq: 59, time: 2012-04-20
>> 12:47:38.965449, event: started pg_info(1 pgs e6026) v1
>> 2012-04-20 12:47:38.990427 ab5d7b40 --OSD::tracker-- seq: 60, time: 2012-04-20
>> 12:47:38.990388, event: waiting_for_osdmap osd_pg_create(pg1.1p3,619;
>> pg2.1p3,1141; ) v2
>> 2012-04-20 12:47:38.990592 aadd6b40 --OSD::tracker-- seq: 61, time: 2012-04-20
>> 12:47:38.990579, event: waiting_for_osdmap pg_info(1 pgs e6026) v1
>> 2012-04-20 12:47:38.994296 aadd6b40 --OSD::tracker-- seq: 61, time: 2012-04-20
>> 12:47:38.993072, event: started pg_info(1 pgs e6026) v1
>> 2012-04-20 12:47:39.077303 ab5d7b40 --OSD::tracker-- seq: 60, time: 2012-04-20
>> 12:47:39.077276, event: started osd_pg_create(pg1.1p3,619; pg2.1p3,1141; ) v2
>> 2012-04-20 12:47:54.546810 ab5d7b40 --OSD::tracker-- seq: 62, time: 2012-04-20
>> 12:47:54.546770, event: waiting_for_osdmap osd_op(client.13891.0:90331
>> rb.0.1.000000000b40 [write 3661824~4096] 2.1f179073) v4
>> osd/OSD.cc: In function 'PG* OSD::_lookup_lock_pg(pg_t)' thread a65cdb40 time
>> 2012-04-20 12:47:54.562370
>> osd/OSD.cc: 1162: FAILED assert(pg_map.count(pgid))
>> ceph version 0.45 (commit:0aea1cb1df5c3e5ab783ca6f2ed7649823b613c5)
>> 1: /usr/bin/ceph-osd() [0x81f3b04]
>> 2: (OSD::do_command(Connection*, unsigned long long, std::vector<std::string,
>> std::allocator<std::string> >&, ceph::buffer::list&)+0x1381) [0x8202b21]
>> 3: (OSD::CommandWQ::_process(OSD::Command*)+0x51) [0x823ac71]
>> 4: (ThreadPool::WorkQueue<OSD::Command>::_void_process(void*)+0x18)
>> [0x8224758]
>> 5: (ThreadPool::worker()+0x42d) [0x82f8ddd]
>> 6: (ThreadPool::WorkThread::entry()+0x1f) [0x822559f]
>> 7: (Thread::_entry_func(void*)+0x10) [0x82f3140]
>> 8: (()+0x6cd3) [0x6e0cd3]
>> 9: (clone()+0x5e) [0xa3ca2e]
>> ceph version 0.45 (commit:0aea1cb1df5c3e5ab783ca6f2ed7649823b613c5)
>> 1: /usr/bin/ceph-osd() [0x81f3b04]
>> 2: (OSD::do_command(Connection*, unsigned long long, std::vector<std::string,
>> std::allocator<std::string> >&, ceph::buffer::list&)+0x1381) [0x8202b21]
>> 3: (OSD::CommandWQ::_process(OSD::Command*)+0x51) [0x823ac71]
>> 4: (ThreadPool::WorkQueue<OSD::Command>::_void_process(void*)+0x18)
>> [0x8224758]
>> 5: (ThreadPool::worker()+0x42d) [0x82f8ddd]
>> 6: (ThreadPool::WorkThread::entry()+0x1f) [0x822559f]
>> 7: (Thread::_entry_func(void*)+0x10) [0x82f3140]
>> 8: (()+0x6cd3) [0x6e0cd3]
>> 9: (clone()+0x5e) [0xa3ca2e]
>> *** Caught signal (Aborted) **
>> in thread a65cdb40
>> ceph version 0.45 (commit:0aea1cb1df5c3e5ab783ca6f2ed7649823b613c5)
>> 1: /usr/bin/ceph-osd() [0x83754db]
>> 2: [0x8c0400]
>> 3: [0x8c0416]
>> 4: (gsignal()+0x4f) [0x97898f]
>> 5: (abort()+0x175) [0x97a2d5]
>> 6: (__gnu_cxx::__verbose_terminate_handler()+0x14d) [0x7a754d]
>> 7: (()+0xb02c4) [0x7a52c4]
>> 8: (()+0xb0300) [0x7a5300]
>> 9: (()+0xb044f) [0x7a544f]
>> 10: (ceph::__ceph_assert_fail(char const*, char const*, int, char
>> const*)+0x255) [0x8300715]
>> 11: /usr/bin/ceph-osd() [0x81f3b04]
>> 12: (OSD::do_command(Connection*, unsigned long long,
>> std::vector<std::string, std::allocator<std::string> >&,
>> ceph::buffer::list&)+0x1381) [0x8202b21]
>> 13: (OSD::CommandWQ::_process(OSD::Command*)+0x51) [0x823ac71]
>> 14: (ThreadPool::WorkQueue<OSD::Command>::_void_process(void*)+0x18)
>> [0x8224758]
>> 15: (ThreadPool::worker()+0x42d) [0x82f8ddd]
>> 16: (ThreadPool::WorkThread::entry()+0x1f) [0x822559f]
>> 17: (Thread::_entry_func(void*)+0x10) [0x82f3140]
>> 18: (()+0x6cd3) [0x6e0cd3]
>> 19: (clone()+0x5e) [0xa3ca2e]
>>
>> So there's couple of things to note:
>> 1. At 2012-04-20 12:47:39.077303 osd started creating PGs in question
>> 2. At 2012-04-20 12:47:54.546810 we got FAILED assert(pg_map.count(pgid))
>>
>> And at this point I guess it is over to you guys as I do not have any idea why
>> this assert fails. If you point me in right direction I would be eternally
>> grateful! :)
>>
>> Regards,
>> Vladimir
>> --
>> To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
next prev parent reply other threads:[~2012-05-07 0:55 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-20 3:49 PGs stuck in creating state Vladimir Bashkirtsev
2012-04-20 5:11 ` Sage Weil
2012-04-20 7:05 ` Vladimir Bashkirtsev
2012-05-07 0:54 ` Vladimir Bashkirtsev [this message]
2012-05-07 15:56 ` Sage Weil
2012-05-22 12:25 ` Vladimir Bashkirtsev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FA71D55.6050902@bashkirtsev.com \
--to=vladimir@bashkirtsev.com \
--cc=ceph-devel@vger.kernel.org \
--cc=sage@newdream.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox